5.1. RESTful Web Service¶

Table of Contents

Overview
- What is RESTful Web Service
- RESTful Web Service development
  - Configuration for RESTful Web Service module
  - REST API implementation sample
Architecture
How to design
How to use
How to extend
- Output control for response using @JsonView
Appendix

5.1.1. Overview ¶

This section explains the basic concept of RESTful Web Service and its development by using Spring MVC.

Refer to the following for basic description of architecture, design and implementation of RESTful Web Service

“Architecture”

Basic architecture of RESTful Web Service is explained.
“How to design”

Points to be considered while designing a RESTful Web Service are explained.
“How to use”

Application structure of RESTful Web Service and API implementation methods are explained.

5.1.1.1. What is RESTful Web Service ¶

REST is an abbreviation of “REpresentational State Transfer”, and is one of the architecture styles
for building an application, wherein data is exchanged between client and server.
REST architecture style consists of various important fundamental rules and the services which are in accordance with these rules (system etc.) are expressed as RESTful.
In other words, “RESTful Web Service” is a Web service that is built in accordance with the fundamental rules of REST.

The concept of “resource” is of prime importance in RESTful Web Service.
In RESTful Web Service, the information that should be provided to the client is extracted as “resource”, from the information stored in database etc. and the CRUD operation for this extracted “resource” is provided to the client using HTTP methods (POST/GET/PUT/DELETE).
The CRUD operation for “resource” is called “REST API” or “RESTful API” and is mentioned as “REST API” in this guideline.
Further, JSON or XML that have higher message visibility and data structure expressivity, are used as the message formats while exchanging resources between client and server.

System configuration of the application that uses RESTful Web Service mainly consists of following 2 patterns.

The basic architecture for exchanging resources between client and server is explained by using “Architecture”.

Sr. No. Description

(1)

A resource is directly exchanged between client application with user interface and RESTful Web Service.

This pattern is used to separate user interface dependent logic with higher number of requirement & specification changes and the logic for a data model which is more universal with less number of changes.

(2)

Rather than directly exchanging the resource with client applications having user interface, the resource is exchanged between systems.

This pattern is used while building a system wherein, the business data stored by each system is managed centrally.

5.1.1.2. RESTful Web Service development ¶

RESTful Web Service is developed in TERASOLUNA Server Framework for Java (5.x) using Spring MVC functionalities.

The common functionalities necessary for RESTful Web Service development are built in Spring MVC by default.

As a result, RESTful Web Service development can be initiated without adding any specific settings or implementations.

Main common functionalities built in Spring MVC by default, are given below.

These functionalities can only be enabled by specifying annotations in the methods of the Controller that provides REST API.

Sr. No. Function overview

(1)

It is a function which converts the JSON or XML format message set in request BODY, to Resource object (JavaBean) and delivers it to the Controller class method (REST API).

(2)

It is a function which implements input validation for the value stored in Resource object (JavaBean) that has been converted from message.

(3)

It is a function which converts Resource object (JavaBean) returned from the Controller class method (REST API) to JSON or XML format and sets it in response BODY.

Note

Exception handling

It is necessary to implement exception handling for each project since a generic functionality for the same is not provided by Spring MVC. For details on exception handling, refer to “Implementing exception handling”.

When RESTful Web Service is developed using Spring MVC, the application is configured as given below. Among these, implementation is necessary for the portion marked with red frame.

Sr. No. Process layer Description

(1)

Spring MVC

(Framework)

Spring MVC receives a request from client and determines the REST API (handler method of Controller) to be called.

(2)

Spring MVC converts the JSON format message specified in request BODY to Resource object by using HttpMessageConverter.

(3)

Spring MVC performs input validation for the value stored in Resource object using Validator.

(4)

Spring MVC calls REST API.

Here, the Resource that has been converted from JSON and for which input validation is carried out, is delivered to REST API.

(5)

REST API

REST API calls Service method and performs the process for DomainObject such as Entity etc.

(6)

Service method calls the Repository method and performs CRUD process for the DomainObject such as Entity etc.

(7)

Spring MVC

(Framework)

Spring MVC converts the Resource object returned from REST API to JSON format message, by using HttpMessageConverter.

(8)

Spring MVC sets JSON format message in response BODY and responds to client.

5.1.1.2.1. Configuration for RESTful Web Service module ¶

A lot of RESTful Web Service specific processing can be entrusted to Spring MVC by using the functionalities provided by the framework.
Therefore, configuration of the module to be developed is almost same as the development of conventional Web application that responds with HTML.
Configuration elements of the module are explained below.

Module for application layer

Sr. No. Module name Description

(1)

Controller class

A class that provides REST API.

Controller class is created by resource unit and specifies end points (URI) of REST API for each resource.

CRUD process for the resource is implemented by delegating it to the Service of domain layer.

(2)

Resource class

Java Bean representing JSON (or XML) that acts as I/O for REST API.

Annotation for Bean Validation and annotation for controlling JSON or XML format are specified in this class.

(3)

Validator Class

(Optional)

Class that implements correlation validation for input value.

If the correlation validation for input value is unnecessary, this class need not be created. Hence, it is considered as optional.

For input value correlation validation, refer to “Input Validation”.

(4)

Helper Class

(Optional)

Class which implements the process that assists the process to be performed by the Controller.

This class is created with the aim of simplifying the Controller processing.

Basically, it implements a method that performs conversion of Resource object and DomainObject models.

If the model can be converted simply by using copy of the value, “Bean Mapping (Dozer)” may be used without creating the Helper class. Hence, it is considered as optional.

Domain layer module

Sr. No. Description

(5)

The description is beyond the scope of this section since the module implemented in the domain layer is independent of application type.

For role of each module, refer to “Application Layering” and for domain layer development, refer to “Domain Layer Implementation”.

Infrastructure layer module

Sr. No Description

(6)

The description is beyond the scope of this section since the module implemented in the infrastructure layer is independent of application type.

Refer to “Application Layering” for role of each module and “Implementation of Infrastructure Layer” for development of infrastructure layer.

5.1.1.2.2. REST API implementation sample ¶

Before giving a detailed explanation, an implementation sample of Resource class and Controller class is given below to let one understand the kind of class created in the application layer.

The implementation sample given below is the REST API of Todo resource which is the topic of Tutorial (Todo Application REST).

Note

It is strongly recommended to practice **:doc:`../../Tutorial/TutorialREST`** first, before reading the detailed explanation.

Aim of the tutorial is to emphasize the saying “Practice makes one perfect”. Prior to detailed explanation, the user can gain the experience of actually practicing RESTful Web Service development using TERASOLUNA Server Framework for Java (5.x), with the help of this tutorial. When this firsthand experience of RESTful Web Service development is followed by reading the detailed explanation, the user gains a deeper understanding of the development.

Especially when the user does not have any experience of RESTful Web Service development, it is recommended to follow a process in the order namely, “Tutorial practice” –> “Detailed explanation of architecture, design and development (described in subsequent sections)” –> “Tutorial revision (Re-practice)”.

Resources handled in implementation sample

Resources handled in the implementation sample (Todo resources) are set in following JSON format.

{
    "todoId" : "9aef3ee3-30d4-4a7c-be4a-bc184ca1d558",
    "todoTitle" : "Hello World!",
    "finished" : false,
    "createdAt" : "2014-02-25T02:21:48.493+0000"
}

Resource class implementation sample

Resource class is created as the JavaBean representing the Todo resources shown above.

package todo.api.todo;

import java.io.Serializable;
import java.util.Date;

import javax.validation.constraints.NotNull;
import javax.validation.constraints.Size;

public class TodoResource implements Serializable {

    private static final long serialVersionUID = 1L;

    private String todoId;

    @NotNull
    @Size(min = 1, max = 30)
    private String todoTitle;

    private boolean finished;

    private Date createdAt;

    public String getTodoId() {
        return todoId;
    }

    public void setTodoId(String todoId) {
        this.todoId = todoId;
    }

    public String getTodoTitle() {
        return todoTitle;
    }

    public void setTodoTitle(String todoTitle) {
        this.todoTitle = todoTitle;
    }

    public boolean isFinished() {
        return finished;
    }

    public void setFinished(boolean finished) {
        this.finished = finished;
    }

    public Date getCreatedAt() {
        return createdAt;
    }

    public void setCreatedAt(Date createdAt) {
        this.createdAt = createdAt;
    }
}

Implementation sample for Controller class (REST API)

Following five REST APIs (Controller handler methods) are created for Todo resource.

Sr. No.	API Name	HTTP Method	Path	Status Code	Description
(1)	GET Todos	GET	`/api/v1/todos`	200 (OK)	All Todo resources are fetched.
(2)	POST Todos	POST	`/api/v1/todos`	201 (Created)	A new Todo resource is created.
(3)	GET Todo	GET	`/api/v1/todos/{todoId}`	200 (OK)	One Todo resource is fetched.
(4)	PUT Todo	PUT	`/api/v1/todos/{todoId}`	200 (OK)	Todo resource is updated to “completed”.
(5)	DELETE Todo	DELETE	`/api/v1/todos/{todoId}`	204 (No Content)	Todo resource is deleted.

package todo.api.todo;

import java.util.ArrayList;
import java.util.Collection;
import java.util.List;

import javax.inject.Inject;

import org.dozer.Mapper;
import org.springframework.http.HttpStatus;

import org.springframework.validation.annotation.Validated;
import org.springframework.web.bind.annotation.PathVariable;
import org.springframework.web.bind.annotation.RequestBody;
import org.springframework.web.bind.annotation.RequestMapping;
import org.springframework.web.bind.annotation.RequestMethod;

import org.springframework.web.bind.annotation.ResponseStatus;
import org.springframework.web.bind.annotation.RestController;

import todo.domain.model.Todo;
import todo.domain.service.todo.TodoService;

@RestController
@RequestMapping("todos")
public class TodoRestController {
    @Inject
    TodoService todoService;
    @Inject
    Mapper beanMapper;

    // (1)
    @RequestMapping(method = RequestMethod.GET)

    @ResponseStatus(HttpStatus.OK)
    public List<TodoResource> getTodos() {
        Collection<Todo> todos = todoService.findAll();
        List<TodoResource> todoResources = new ArrayList<>();
        for (Todo todo : todos) {
            todoResources.add(beanMapper.map(todo, TodoResource.class));
        }
        return todoResources;
    }

    // (2)
    @RequestMapping(method = RequestMethod.POST)

    @ResponseStatus(HttpStatus.CREATED)
    public TodoResource postTodos(@RequestBody @Validated TodoResource todoResource) {
        Todo createdTodo = todoService.create(beanMapper.map(todoResource, Todo.class));
        TodoResource createdTodoResponse = beanMapper.map(createdTodo, TodoResource.class);
        return createdTodoResponse;
    }

    // (3)
    @RequestMapping(value="{todoId}", method = RequestMethod.GET)

    @ResponseStatus(HttpStatus.OK)
    public TodoResource getTodo(@PathVariable("todoId") String todoId) {
        Todo todo = todoService.findOne(todoId);
        TodoResource todoResource = beanMapper.map(todo, TodoResource.class);
        return todoResource;
    }

    // (4)
    @RequestMapping(value="{todoId}", method = RequestMethod.PUT)

    @ResponseStatus(HttpStatus.OK)
    public TodoResource putTodo(@PathVariable("todoId") String todoId) {
        Todo finishedTodo = todoService.finish(todoId);
        TodoResource finishedTodoResource = beanMapper.map(finishedTodo, TodoResource.class);
        return finishedTodoResource;
    }

    // (5)
    @RequestMapping(value="{todoId}", method = RequestMethod.DELETE)

    @ResponseStatus(HttpStatus.NO_CONTENT)
    public void deleteTodo(@PathVariable("todoId") String todoId) {
        todoService.delete(todoId);
    }

}

5.1.2. Architecture ¶

This section explains the architecture for building a RESTful Web Service.

Resource Oriented Architecture (ROA) is used as the architecture for building RESTful Web Service.
ROA is an abbreviation of “Resource Oriented Architecture” and defines the basic architecture for building a Web Service in accordance with REST architecture style (rules).
It is important to thoroughly understand ROA architecture when creating RESTful Web Service.

This section explains following 7 elements of ROA architecture.
These form important architectural elements for building RESTful Web Service. However, it is not always necessary to apply all of these elements.
Necessary elements should be applied after considering the characteristics of the application to be developed.

Following five architectural elements must be applied regardless of the application characteristics.

Sr. No. Architecture Architecture overview

(1)

Publishing as a resource on Web

It is published as a Web resource through which information stored in the system is provided to the client.

(2)

Identifying the resource using URI

URI (Universal Resource Identifier) that can uniquely identify a Web resource is assigned to the resource published to the client.

(3)

Resource operations using HTTP methods

Resource related operations are implemented by using different HTTP methods (GET, POST, PUT and DELETE).

(4)

Using an appropriate format

JSON or XML that represents the data structure, is used as resource format.

(5)

Using the appropriate HTTP status code

Appropriate HTTP status code is set in the response returned to the client.

Following two architectural elements are applied depending on the characteristics of an application.

Sr. No. Architecture Architectural elements

(6)

Stateless communication between client and server

This element enables to perform the process only by the information requested from client, without retaining the application status on the server.

(7)

Link to related resource

It includes links to other resources (URI) inside a resource that are related to the specified resource.

5.1.2.1. Publishing as a resource on Web ¶

It is published as a resource on Web as the means to provide information stored in the system to client.

It signifies that resources can be accessed using HTTP protocol and URI is used as a method to identify resources.

For example, following information is published on the Web as resource, for a Web system providing shopping site.

Product information
Stock information
Order information
Member information
Authentication information for each member (Login ID and password etc.)
Order history information for each member
Authentication history information for each member
and more …

5.1.2.2. Identifying the resource using URI ¶

URI (Universal Resource Identifier) that can uniquely identify a resource on the Web, is assigned to the resource to be published to the client.

URL (Uniform Resource Locator), which is a subset of the URI, is actually used.

In ROA, the ability to access a resource on the Web using URI, is called as “Addressability”.

It signifies that on using the same URI, the same resource can be accessed from anywhere.

URI assigned to RESTful Web Service is a combination of “a noun that indicates the type of resource” and “a value (ID etc.) that uniquely identifies a resource”.

For example, URI of product information handled by a Web system that provides a shopping site, is given below.

http://example.com/api/v1/items

“items” portion is the “noun that represents the type of resource”. If there are multiple resources, a plural noun is used.

In the above example, a plural noun is specified to indicate the product information. It forms the URI for batch operation of product information. If replaced to a file system, it corresponds to a directory.
http://example.com/api/v1/items/I312-535-01216

The part “I312-535-01216” in the above URI, represents “the value that identifies the resource” and varies for each resource.

In the above example, product ID is specified as the value for uniquely identifying product information. It acts as the URI used to handle specific product information. If replaced by a file system, it corresponds to the files stored in a directory.

Warning

Verbs that indicate operations cannot be included in the URI assigned to RESTful Web Service are as shown below.

http://example.com/api/v1/items?get&itemId=I312-535-01216

http://example.com/api/v1/items?delete&itemId=I312-535-01216

URI mentioned in the above example is not suitable to be assigned to RESTful Web Service since it includes verbs like get or delete.

In RESTful Web Service, Resource related operations are represented by using HTTP methods (GET, POST, PUT and DELETE).

5.1.2.3. Resource operations using HTTP methods ¶

Resource operations can be performed by using HTTP methods (GET, POST, PUT, DELETE).

In ROA, HTTP methods are called as “Unified interface”.

It implies that HTTP methods can be executed for all the resources published on the Web and that the meaning of HTTP method does not change with each resource.

The association of resource operations assigned to HTTP methods and the post-conditions ensured by each operation, are explained below.

Sr. No. HTTP method Resource operations Post-conditions that the operation should ensure

(1)

GET

Resource is fetched.

Safety, idempotency.

(2)

POST

Resource is created.

Server assigns the URI for created resource, this assigned URI is set to Location header of response and is returned to client.

(4)

PUT

Resource is created or updated.

Idempotency.

(5)

PATCH

Resource difference is updated.

Idempotency.

(6)

DELETE

Resource is deleted.

Idempotency.

(7)

HEAD

Meta information of resource is fetched.

Same process as GET is performed and responds with header only.

Safety, Idempotency.

(8)

OPTIONS

Responds with a list of HTTP methods that can be used for resources.

Safety, idempotency.

Note

Ensuring safety and idempotency

When resource operation is performed using HTTP method, it is necessary to ensure “safety” and “idempotency” as post conditions.

[Safety]

It ensures that even if a particular value is multiplied several times by 1, the value does not change. (for example, if 10 is multiplied several times by 1, result remains 10). This guarantees that even if an operation is carried out for several times, resource status does not change.

[Idempotency]

It ensures that even if a value is multiplied a number of times by 0, the value remains 0 (for example, if 10 is multiplied a number of times or just once by 0, the result remains 0). This signifies that once an operation is performed, resource status does not change even if the same operation is performed later for a number of times. However, when another client is modifying the status of the same resource, idempotency need not be ensured and can be handled as a precondition error.

Tip

When client specifies the URI assigned to a resource for creating a resource

To create a resource, when the URI to be assigned to the resource is specified by client, PUT method is called for the URI assigned to the resource to be created.

When creating a resource using PUT method, the general operation is to,

Create a resource when no resource exists in the specified URI

Modify resource status when a resource already exists

Following is the difference in process images while creating a resource using PUT and POST methods.

[Process image while creating a resource using PUT method]

Sr. No. Description

(1)

PUT method is called by specifying URI (ID) of the resource to be created in URI.

(2)

Entity is created for the ID specified in URI.

If the entity has already been created with same ID, the contents are updated.

(3)

Created or updated resource is sent as a response.

[Process image while creating a resource using POST method]

Sr. No. Description

(1)

POST method is called.

(2)

ID that identifies the requested resource is generated.

(3)

Entity for the ID generated in (2) is created.

(4)

Created resource is sent as a response.

URI for accessing the generated resource is set in the Location header of response.

5.1.2.4. Using an appropriate format ¶

JSON or XML that indicate data structure, are used for resource format.

However, formats other than JSON or XML can also be used depending on the type of resource.

For example, a resource classified as statistical information can be published with line graph represented in image format (Binary data).

When multiple formats are supported as resource formats, any of the following methods is used to change the format.

Changing the format using an extension.

Response format can be changed by specifying the extension.

This guideline recommends changing the format using extension.

The reasons for recommending this format are, responding format can be easily specified and as the responding format is included in URI, it results in an intuitive URI.

Note

Examples of URI where format is changed using extension

http://example.com/api/v1/items.json

http://example.com/api/v1/items.xml

http://example.com/api/v1/items/I312-535-01216.json

http://example.com/api/v1/items/I312-535-01216.xml

Changing format by using the MIME type in Accept header of request.

A typical MIME type used in RESTful Web Service is shown below.

Sr. No. Format MIME type

(1)

JSON

application/json

(2)

XML

application/xml

5.1.2.5. Using the appropriate HTTP status code ¶

Appropriate HTTP status code is set in the response to be returned to the client.

Value indicating the method by which server has processed the request received from the client, is set in HTTP status code.

This is an HTTP specification and it is recommended to conform to the HTTP specifications wherever possible.

Tip

HTTP Specifications

Refer to RFC 7230 (Hypertext Transfer Protocol – HTTP/1.1) - 3.1.2 Status Line.

In a traditional Web system wherein HTML is returned in the browser, regardless of the process results, it was common that "200 OK" was returned as the response and process results were displayed in entity body (HTML),
In a traditional Web application that returns HTML, there were no issues since an operator (human) determined the process results.
However, if this structure is used to build a RESTful Web Service, following issues may exist potentially. Hence, it is recommended to set appropriate status codes.

Sr. No. Potential issues

(1)

Even in cases where only the process result (success and failure) is to be determined, unnecessary process has to be performed, as analysis process is mandatory for entity body.

(2)

Since it is mandatory to be aware of the unique error codes defined in the system while handling errors, it may adversely affect the architecture (design and implementation) at the client side.

(3)

Intuitive error analysis may be obstructed when analyzing error causes at client side, since understanding the meaning of unique error codes defined in the system is required for the same.

Note

In RFC 7230 which specifies HTTP message syntax, output of description clauses of HTTP status code (reason-phrase) is not mandatory and it is prescribed that the client should be ignored. For example, description clauses are not output in Tomcat 8.5 of implementation which is in conformance with RFC 7230.

Refer to RFC 7230(Hypertext Transfer Protocol – HTTP/1.1) - 3.1.2 Status Line.

5.1.2.6. Stateless communication between client and server ¶

In this communication, only the information requested by the client is processed, without retaining the application status on the server.

In ROA, a state wherein application status is not retained on the server, is called “stateless”.
It signifies that application status is not retained in application server memory (HTTP session etc.) and resource related operations can be completed only by using the requested information.
In this guideline, it is recommended to retain “stateless” state wherever possible.

Note

Application status

Web page transition status, selection status for input value, pull down/checkbox/radio buttons and authentication status etc. are included in application status.

Note

Relation with CSRF measures

Please note that the “Stateless” state between client and server cannot be retained when the CSRF measures described in this guideline are implemented for RESTful Web Service as, the token values for CRSF measures are stored in HTTP sessions.

As a result, system availability must be considered while implementing CSRF measures.

Following measures need to be implemented for a system that requires high availability.

Perform AP server clustering and session replication.

Use a destination other than AP server memory for storing a session.

However, above measures may affect the performance. Hence, it is necessary to consider performance requirements as well.

For CSRF measures, refer to CSRF Countermeasures.

Todo

TBD

When high availability is required, it is advisable to review an architecture wherein, “token values for CSRF measures are stored in a destination other than the AP server memory (HTTP session)”.

Basic architecture is currently under review and will be documented in subsequent versions.

5.1.2.7. Link to related resource ¶

Hypermedia link (URI) to another resource related to the specified resource, is included in the resource.

In ROA, the process of incorporating a hypermedia link for another resource in the resource status display, is called “Connectivity”.

It signifies that both the linked resources retain this mutual link and all the related resources can be accessed by following this link.

Connectivity of resources is described below, with the example of member information resource of a shopping site.

Sr. No. Description

(1)

Following JSON is returned when the member information resource is fetched (GET http://example.com/api/v1/members/M000000001).

{
    "memberId" : "M000000001",
    "memberName" : "John Smith",
    "address" : {
        "address1" : "45 West 36th Street",
        "address2" : "7th Floor",
        "city" : "New York",
        "state" : "NY",
        "zipCode" : "10018"
    },
    "links" : [
        {
            "rel" : "orders",
            "href" : "http://example.com/api/v1/memebers/M000000001/orders"
        },
        {
            "rel" : "authentications",
            "href" : "http://example.com/api/v1/memebers/M000000001/authentications"
        }
    ]
}

Highlighted portion is the hypermedia link (URI) to other related resource.

In the above example, connectivity is retained between the order history resource and authentication history resource of each member.

(2)

Following JSON is returned when order history resource is fetched (GET http://example.com/api/v1/memebers/M000000001/orders) using the hypermedia link (URI) set in the returned JSON.

{
    "orders" : [
        {
            "orderId" : "029b49d7-0efa-411b-bc5a-6570ce40ead8",
            "orderDatetime" : "2013-12-27T20:34:50.897Z",
            "orderName" : "Note PC",
            "shopName" : "Global PC Shop",
            "links" : [
                {
                    "rel" : "order",
                    "href" : "http://example.com/api/v1/memebers/M000000001/orders/029b49d7-0efa-411b-bc5a-6570ce40ead8"
                }
            ]
        },
        {
            "orderId" : "79bf991d-d42d-4546-9265-c5d4d59a80eb",
            "orderDatetime" : "2013-12-03T19:01:44.109Z",
            "orderName" : "Orange Juice 100%",
            "shopName" : "Global Food Shop",
            "links" : [
                {
                    "rel" : "order",
                    "href" : "http://example.com/api/v1/memebers/M000000001/orders/79bf991d-d42d-4546-9265-c5d4d59a80eb"
                }
            ]
        }
    ],
    "links" : [
        {
            "rel" : "ownerMember",
            "href" : "http://example.com/api/v1/memebers/M000000001"
        }
    ]
}

Highlighted portion is the hypermedia link (URI) for another related resource.

In the above example, connectivity is retained between the resource for owner member of order history and the order history resource.

(3)

Following JSON is returned when the resource for owner member of order history is fetched again (GET http://example.com/api/v1/memebers/M000000001) and the resource for authentication history is fetched (GET http://example.com/api/v1/memebers/M000000001/authentications/) using hypermedia link (URI) set in the returned JSON.

{
    "authentications" : [
        {
            "authenticationId" : "6ae9613b-85b6-4dd1-83da-b53c43994433",
            "authenticationDatetime" : "2013-12-27T20:34:50.897Z",
            "clientIpaddress" : "230.210.3.124",
            "authenticationResult" : true
        },
        {
            "authenticationId" : "103bf3c5-7707-46eb-b2d8-c00ce6243d5f",
            "authenticationDatetime" : "2013-12-26T10:03:45.001Z",
            "clientIpaddress" : "230.210.3.124",
            "authenticationResult" : false
        }
    ],
    "links" : [
        {
            "rel" : "ownerMember",
            "href" : "http://example.com/api/v1/memebers/M000000001"
        }
    ]
}

Highlighted portion is the hypermedia link (URI) to other linked resource.

In the above example, connectivity is retained with respect to the resource for owner member of authentication history.

It is not mandatory for a resource to include hypermedia link (URI) to another resource.
When all the endpoints (URI) of REST API are already published, even if the link for related resource is set in the resource, it is highly unlikely that it will be used.
Particularly, it makes no sense to provide links for the REST API that exchanges resources between systems, since REST API end points that are already published can be accessed directly.
There is no need to provide a link where it is not required.

In contrast, when a resource is to be directly exchanged between a client application with user interface and RESTful Web service, the loose coupling between client and server can be enhanced by providing a link.

Following are the reasons for enhancing the coupling between client and server.

Sr. No. Reasons to enhance the loose coupling

(1)

Client application needs to know only the logical name of the link in advance. Hence, it is not necessary to know the specific URI for calling REST API.

(2)

Since it is not necessary for the client application to know the specific URI, impact on server, owing to change in URI, can be minimized.

Whether to provide a hypermedia link (URI) to other resources should be determined on considering all the points described above.

Tip

Relation with HATEOAS

HATEOAS is an abbreviation for “Hypermedia As The Engine Of Application State” and is one of the architectures for creating a RESTful Web application.

HATEOAS architecture includes the following processes.

In the resources (JSON or XML) that are exchanged between client and server, the server includes a hypermedia link (URI) to an accessible resource.
Client fetches required resources from the server through the hypermedia link in the resource display (JSON or XML), and changes application status (screen status etc.).

Therefore, providing a link for related resources is consistent with the HATEOAS architecture.

When loose coupling between server and client is to be enhanced, please review if using the HATEOAS architecture would be beneficial.

5.1.3. How to design ¶

This section explains the design of RESTful Web Service.

5.1.3.1. Resource extraction ¶

First, the resource published on the Web is extracted.

Precautions while extracting a resource are as given below.

Sr. No. Precautions while extracting a resource

(1)

Resource published on the web is used as the information managed by database. However, data model of the database must not be published as resource as it is, without careful consideration.

It should be closely investigated, as the fields stored in the database may include some fields that should not be disclosed to the client.

(2)

When information type is different in spite of being managed by the same table of the database, publishing it as a separate resource may be considered.

There are cases wherein, even if essentially seen as different information, it is managed by the same table, due to same data structure. Hence, such cases need to be reviewed closely.

(3)

In RESTful Web Service, the information operated by an event is extracted as a resource.

The event itself should not be extracted as a resource.

For example, when creating RESTful Web Service to be called from the events (approve, deny, return etc.) generated by work flow functionality, information for managing the workflow status or the workflow itself, is extracted as a resource.

5.1.3.2. Assigning URI ¶

URI is assigned to the extracted resource for identifying it.

It is recommended to use following formats for the URI.

http(s)://{Domain name (:Port number)}/{A value indicating REST API}/{API version}/{path for identifying a resource}
http(s)://{Domain name indicating REST API(:Port number)}/{API version}/{path for identifying a resource}

A typical example is given below.

http://example.com/api/v1/members/M000000001
http://api.example.com/v1/members/M000000001

5.1.3.2.1. Assigning a URI that indicates the API as REST API ¶

It is recommended to include api within the URI domain or path, to clearly indicate that the URI is intended for RESTful Web Service (REST API).

Typically, the URI is as given below.

http://example.com/api/...
http://api.example.com/...

5.1.3.2.2. Assigning a URI for identifying the API version ¶

It is recommended to include a value that identifies the API version, in the URI to be published to the client, since it may be necessary to run RESTful Web Service in multiple versions.

Typically, the URI format is as follows.

http://example.com/api/{API version}/{path for identifying a resource}
http://api.example.com/{API version}/{path for identifying a resource}

Todo

TBD

Whether API version should be included in URI, is currently being investigated.

5.1.3.2.3. Assigning a path for identifying resource ¶

The 2 URLs given below are assigned for resources that are published on Web.

Following is an example of a URI when publishing member information on Web.

Sr. No. URI format Typical example of URI Description

(1)

/{Noun that represents collection of resources}

/api/v1/members

It is the URI used for batch operations of resources.

(2)

/{Noun that represents collection of resources/resource identifier (ID etc)}

/api/v1/members/M0001

It is the URI used while operating a specific resource.

The URI for related resources published on Web are nested and then displayed.

Following example describes the URI for publishing order information for each member on the Web.

Sr. No. URI format Typical example of URI Description

(3)

{Resource URI}/{Noun representing collection of related resources}

/api/v1/members/M0001/orders

It is the URI used at the time of batch operation of related resources.

(4)

{Resource URI}/{Noun representing collection of related resources}/{Identifier for related resource (ID etc.)}

/api/v1/members/M0001/orders/O0001

It is the URI used when operating a specific related resource.

When the related resource published on Web has a single element, the noun that indicates the related resource should be singular and not plural.

Following is the example of URI to publish credentials of each member on Web.

Sr. No. URI format Typical example of URI Description

(5)

{URI for resource}/{Noun representing related resource}

/api/v1/members/M0001/credential

It is the URI used when operating a related resource with single element.

5.1.3.3. Assigning HTTP methods ¶

CRUD operation for resources is published as REST API by assigning the following HTTP methods for the URI assigned to each resource.

5.1.3.3.1. Assigning HTTP methods for resource collection URI ¶

Sr. No. HTTP methods Overview of the REST API to be implemented

(1)

GET

REST API that fetches collection of resources specified in URI, is implemented.

(2)

POST

REST API that creates and adds the specified resource to the collection is implemented.

(3)

PUT

REST API that performs batch update for resource specified in URI is implemented.

(4)

DELETE

REST API that performs batch deletion for resource specified in URI is implemented.

(5)

HEAD

REST API that fetches meta information of the resource collection specified in URI, is implemented.

A process same as GET is performed and only header is sent as response.

(6)

OPTIONS

REST API that responds with the list of HTTP methods (API) supported by resource collection specified in URI, is implemented.

5.1.3.3.2. Assigning HTTP methods for URI of specific resources ¶

Sr. No. HTTP methods Overview of REST API to be implemented

(1)

GET

REST API that fetches the resource specified in URI is implemented.

(2)

PUT

REST API that creates or updates the resource specified in URI is implemented.

(3)

DELETE

REST API that deletes the resource specified in URI is implemented.

(4)

HEAD

A REST API that fetches meta information of the resource specified in URI is implemented.

A process same as GET is performed and only header is sent as a response.

(5)

OPTIONS

REST API that responds with list of HTTP methods (API) supported by the resource specified in URI is implemented.

5.1.3.4. Resource format ¶

It is recommended to use JSON as the format for displaying a resource.

The explanation hereafter is based on the assumption that JSON is used as the format for displaying a resource.

5.1.3.4.1. JSON Field name ¶

It is recommended to use “lower camel case” as the JSON field name.

It is recommended on considering its compatibility with JavaScript, which is assumed as one of the client applications.

The JSON sample with field name set in “lower camel case”, is as given below.

In “lower camel case”, first letter of the word is in lowercase and subsequent first letters of words are in uppercase.

{
    "memberId" : "M000000001"
}

5.1.3.4.2. NULL and blank characters ¶

It is recommended to differentiate NULL and blank characters as JSON values.

Although, as application process, NULL and blank characters are often equated, it is advisable to differentiate NULL and blank characters as the value to be set in JSON.

JSON sample wherein NULL and blank characters are differentiated, is given below.

{
    "dateOfBirth" : null,
    "address1" : ""
}

5.1.3.4.3. Date format ¶

It is recommended to use extended ISO-8601 format as the JSON date field format.
Format other than extended ISO-8601 format can be used. However, it is advisable to use the extended ISO-8601 format, if there is no particular reason otherwise.
There are two formats in ISO-8601 namely, basic format and extended format, however, readability is higher in extended format.

Basically, there are following three formats.

yyyy-MM-dd

{
    "dateOfBirth" : "1977-03-12"
}

yyyy-MM-dd’T’HH:mm:ss.SSSZ

{
    "lastModifiedAt" : "2014-03-12T22:22:36.637+09:00"
}

yyyy-MM-dd’T’HH:mm:ss.SSS’Z’ (format for UTC)

{
    "lastModifiedAt" : "2014-03-12T13:11:27.356Z"
}

5.1.3.4.4. Hypermedia link format ¶

It is recommended to use the following format to create a hypermedia link.

Sample of recommended format is as given below.

{
    "links" : [
        {
            "rel" : "ownerMember",
            "href" : "http://example.com/api/v1/memebers/M000000001"
        }
    ]
}
Link object consisting of 2 fields - "rel" and "href" is retained in collection format.

Link name for identifying the link is specified in "rel".

URI to access the resource is specified in "href".

"links" is the field which retains the Link object in collection format.

5.1.3.4.5. Format at the time of error response ¶

When an error is detected, it is recommended to use a format that can retain the details of the error occurred.
Detailed error information should be included, especially when there is a possibility of the error being eliminated owing to re-operation by client.
In contrast, detailed error information should not be included when an event that exposes system vulnerability occurs. In such cases, the detailed error information should be output to a log.

Following is an example of the response format when error is detected.

{
  "code" : "e.ex.fw.7001",
  "message" : "Validation error occurred on item in the request body.",
  "details" : [ {
    "code" : "ExistInCodeList",
    "message" : "\"genderCode\" must exist in code list of CL_GENDER.",
    "target" : "genderCode"
  } ]
}

In the above example,

Error code (code)
Error message (message)
Error details list (details)

are provided as error response formats.

It is assumed that the error details list is used when input validation error occurs. It is a format that can retain details like the field in which the error occurred and the information of the error.

5.1.3.5. HTTP Status Code ¶

HTTP status code is sent as the response, in accordance with the following guidelines.

Sr. No. Objectives

(1)

When the request is successful, an HTTP status code indicating success or transfer (2xx or 3xx system) is sent as response.

(2)

When the cause of request failure lies at client side, an HTTP status code indicating client error (4xx system) is sent as the response.

When client is not responsible for request failure however, when the request may be successful through a re-operation by client, it is still considered as client error.

(3)

When the cause of request failure lies at server side, an HTTP status code indicating server error (5xx system) is sent as the response.

5.1.3.5.1. HTTP status codes when the request is successful ¶

When the request is successful, following HTTP status codes are sent as responses, depending on status.

Sr. No.

HTTP

Status codes

Description

Applicable conditions

(1)

200

OK

HTTP status code notifying that the request was successful.

It is sent as a response when the resource information corresponding to the request is output in the entity body of response, as a result of successful request,

(2)

201

Created

HTTP status code notifying the creation of a new resource.

It is used when a new resource is created using POST method.

URI for created resource is set in the Location header of the response.

(3)

204

No Content

HTTP status code notifying a successful request.

It is sent as a response when the resource information corresponding to request is not output in the entity body of response, as a result of successful request.

Tip

The difference between "200 OK and "204 No Content" is whether the resource information is output/not output in the response body.

5.1.3.5.2. HTTP status code when the cause of request failure lies at client side ¶

When the cause of request failure lies at client side, following HTTP status codes are sent as responses depending on the status.

Status codes that must be identified by individual REST APIs handling the resources, are as given below.

Sr. No.

HTTP

Status code

Description

Applicable conditions

(1)

400

Bad Request

HTTP status code notifying that the request syntax or requested value is incorrect.

It is sent as a response when an incomplete JSON or XML format specified in entity body is detected or an incomplete input value is specified in JSON or XML format or in the request parameters.

(2)

404

Not Found

HTTP status code notifying that the specified resource does not exist.

It is sent as a response when resource corresponding to specified URI does not exist in the system.

(3)

409

Conflict

HTTP status code notifying that the process is terminated due to conflict in resource status when the request status is changed by requested contents.

It is sent as a response when an exclusive error or a business error is detected.

Conflict details and error details required to resolve the conflict need to be output to the entity body.

Following status codes need not be identified by individual REST APIs which handle the resources.

These status codes need to be identified as the framework or common process.

Sr. No.

HTTP

Status codes

Description

Applicable conditions

(4)

405

Method Not Allowed

HTTP status code notifying that the used HTTP method is not supported by the specified resource.

It is sent as a response when an unsupported HTTP method is used.

The list of allowed methods is set in the Allow header of response.

(5)

406

Not Acceptable

HTTP status code notifying the inability to receive a request, as the resource status cannot be sent as a response in the specified format.

It is sent as a response when, the format specified in extension or Accept header is not supported as a response format.

(6)

415

Unsupported Media Type

HTTP status code notifying that the request cannot be received, as the format specified in entity body is not supported.

It is sent as a response when an unsupported format is specified in Content-Type header, as request format.

5.1.3.5.3. HTTP status code when the cause of request failure lies at server side ¶

When the cause of request failure lies at server side, HTTP status codes given below are sent as responses, depending on the status.

Sr. No.

HTTP

Status code

Description

Applicable conditions

(1)

500

Internal Server Error

HTTP status code notifying that an internal error has occurred in the server.

It is sent as a response when an unexpected error has occurred in the server or a status that should not occur during a normal operation is detected.

5.1.3.6. Authentication and Authorization ¶

Please refer to : ref: OAuth <OAuth> for the mechanism of authentication and authorization using the OAuth 2 mechanism.

5.1.3.7. Conditional update control of resource ¶

Todo

TBD

The process for conditional update (exclusive control) of a resource using HTTP header is explained here.

Conditional update using headers like Etag/Last-Modified-Since etc. will be described in subsequent versions.

5.1.3.8. Conditional acquisition control of resource ¶

Todo

TBD

The process for conditional acquisition (304 not modified control) of resource using HTTP header is explained here.

Conditional acquisition using headers like Etag/Last-Modified etc. will be described in subsequent versions.

5.1.3.9. Cache control of resource ¶

Todo

TBD

Cache control of resources which use HTTP header, is explained here.

Cache control of resources that use headers such as Cache-Control/Pragma/Expires etc. shall be described in subsequent versions.

5.1.3.10. Versioning ¶

Todo

TBD

Version control of RESTful Web Service and details on performing parallel operations in multiple versions, will be described in subsequent versions.

5.1.4. How to use ¶

This section explains the basic method to create RESTful Web Service.

5.1.4.1. Web application configuration ¶

While building RESTful Web Service, Web application (war) is built by any one of the following configurations.

It is recommended to build a Web application that is exclusive to RESTful Web Service unless there is a specific reason otherwise.

Sr. No. Configuration Description

(1)

Build an exclusive Web application for RESTful Web Service.

It is recommended to build an exclusive Web application (war) for RESTful Web Service when an independence with client application (UI layer application) that uses RESTful Web Service, is to be ensured (is necessary).

This method can be used to create RESTful Web Service when there are multiple client applications using RESTful Web Service.

(2)

Build by providing DispatcherServlet for RESTful Web Service.

When it is not necessary to ensure independence of client application (UI layer application) that uses RESTful Web Service, both the client application and RESTful Web Service can be built as a single Web application (war).

However, it is strongly recommended to build it by dividing DispatcherServlet that receives the requests for RESTful Web Service and DispatcherServlet that receives client application requests.

Note

Client application (UI layer application)

Client application (UI layer application) described here refers to the application that responds with client layer (UI layer) component called CSS (Cascading Style Sheets) and scripts like HTML, JavaScript etc. HTML generated by template engine such as JSP, is also considered.

Note

Why division of DispatcherServlet is recommended

In Spring MVC, operation settings of the application are defined for each DispatcherServlet. Therefore, when the requests of RESTful Web Service and client application (UI layer application) are configured to be received from the same DispatcherServlet, specific operation settings for RESTful Web Service or client application cannot be defined, thus resulting in complex or cumbersome settings.

In this guideline, when RESTful Web Service and client application are to be configured as same Web application, it is recommended to divide DispatcherServlet to avoid occurrence of the issues described above.

Configuration image when building a Web application exclusive to RESTful Web Service, is as follows:

Configuration image when building RESTful Web Service and client application as a single application, is as follows:

5.1.4.2. pom.xml configuration ¶

Configuration of dependency relation is not required if terasoluna-gfw-common-dependencies is used.

Warning

Configuration while using in Java SE 7 environment

terasoluna-gfw-common-dependencies configure a dependency relation considering Java SE 8 as a prerequisite. Java SE 8 dependency library is excluded as shown below while using in Java SE 7 environment. For java SE 8 dependency library, refer “OSS Versions ” of Architectural Overview.

<dependency>
    <groupId>org.terasoluna.gfw</groupId>
    <artifactId>terasoluna-gfw-common-dependencies</artifactId>
    <exclusions>
        <exclusion>
            <groupId>com.fasterxml.jackson.datatype</groupId>
            <artifactId>jackson-datatype-jsr310</artifactId>
        </exclusion>
    </exclusions>
</dependency>

5.1.4.3. Application settings ¶

Application settings for RESTful Web Service are explained below.

Warning

DoS attack measures at the time of StAX(Streaming API for XML) use

If the StAX is used to parse the XML format data, protect DoS attack. For details, refer to CVE-2015-3192 - DoS Attack with XML Input.

5.1.4.3.1. Settings for activating the Spring MVC components necessary for RESTful Web Service ¶

Create a bean definition file for RESTful Web Service.

Definitions that are required to operate the sample indicated in the explanation hereafter, are as follows:

spring-mvc-rest.xml

<?xml version="1.0" encoding="UTF-8"?>
<beans xmlns="http://www.springframework.org/schema/beans"
    xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xmlns:context="http://www.springframework.org/schema/context"
    xmlns:mvc="http://www.springframework.org/schema/mvc"
    xmlns:util="http://www.springframework.org/schema/util"
    xmlns:aop="http://www.springframework.org/schema/aop"
    xsi:schemaLocation="
        http://www.springframework.org/schema/mvc
        http://www.springframework.org/schema/mvc/spring-mvc.xsd
        http://www.springframework.org/schema/beans
        http://www.springframework.org/schema/beans/spring-beans.xsd
        http://www.springframework.org/schema/util
        http://www.springframework.org/schema/util/spring-util.xsd
        http://www.springframework.org/schema/context
        http://www.springframework.org/schema/context/spring-context.xsd
        http://www.springframework.org/schema/aop
        http://www.springframework.org/schema/aop/spring-aop.xsd
">

    
    
    <context:property-placeholder
        location="classpath*:/META-INF/spring/*.properties" />

    <bean id="jsonMessageConverter"
        class="org.springframework.http.converter.json.MappingJackson2HttpMessageConverter">
        <property name="objectMapper" ref="objectMapper" />
    </bean>

    <bean id="objectMapper" class="org.springframework.http.converter.json.Jackson2ObjectMapperFactoryBean">
        
        <property name="dateFormat">
            <bean class="com.fasterxml.jackson.databind.util.StdDateFormat" />
        </property>
    </bean>

    
    
     <mvc:annotation-driven>
        <mvc:message-converters register-defaults="false">
            <ref bean="jsonMessageConverter" />
        </mvc:message-converters>
        
        <mvc:argument-resolvers>
            <bean class="org.springframework.data.web.PageableHandlerMethodArgumentResolver" />
        </mvc:argument-resolvers>
    </mvc:annotation-driven>

    
    
    <mvc:interceptors>
        <mvc:interceptor>
            <mvc:mapping path="/**" />
            <bean class="org.terasoluna.gfw.web.logging.TraceLoggingInterceptor" />
        </mvc:interceptor>
        
    </mvc:interceptors>

    
    
    <context:component-scan base-package="com.example.project.api" />

    
    
    <bean id="handlerExceptionResolverLoggingInterceptor"
        class="org.terasoluna.gfw.web.exception.HandlerExceptionResolverLoggingInterceptor">
        <property name="exceptionLogger" ref="exceptionLogger" />
    </bean>
    <aop:config>
        <aop:advisor advice-ref="handlerExceptionResolverLoggingInterceptor"
            pointcut="execution(* org.springframework.web.servlet.HandlerExceptionResolver.resolveException(..))" />
    </aop:config>

</beans>
Sr. No. Description

(1)

When the value defined in the property file needs to be referred by an application layer component, the property file should be read by using <context:property-placeholder> element.

For the details of fetching a value from property file, refer to “Properties Management”.

(2)

Add the settings for handling the JSON date field format as extended ISO-8601 format.

Also, when Joda Time class is to be used as a property of JavaBean which represents a resource (Resource class), “Configuration while using JSR-310 Date and Time API / Joda Time” must be carried out.

(3)

Perform bean registration for the Spring MVC framework component necessary for providing RESTful Web Service.

JSON can be used as a resource format by performing these settings.

In the above example, resource format is restricted to JSON since the register-defaults attribute of <mvc:message-converters> element is set as false.

To use XML as resource format, MessageConverter for XML, that performs the XXE Injection countermeasure, should be specified. For details on designated methods, refer to “Enabling XXE Injection measures” .

(4)

Add the settings to enable page search functionality.

For page search details, refer to “Pagination”.

This setting is not required if page search is unnecessary, however, it is alright if defined.

(5)

Perform bean registration for Spring MVC interceptor.

In the above example, only the TraceLoggingInterceptor provided by common library is defined. However, when using JPA as data access, OpenEntityManagerInViewInterceptor setting needs to be added separately.

Refer to Database Access (JPA) for OpenEntityManagerInViewInterceptor.

(6)

Scan the application layer components for RESTful Web Service (Controller or Helper class etc.) and perform bean registration.

The "com.example.project.api" part is the package name for each project.

(7)

Specify AOP definition to output the exception handled by Spring MVC framework to a log.

Refer to Exception Handling for HandlerExceptionResolverLoggingInterceptor.

Note

How to define a Bean for ObjectMapper

When a Bean is to be defined for com.fasterxml.jackson.databind.ObjectMapper of Jackson, Jackson2ObjectMapperFactoryBean provided by Spring should be used. If Jackson2ObjectMapperFactoryBean is used, extension module for JSR-310 Date and Time API or Joda Time can be auto-registered. Further, ObjectMapper configuration which is difficult to represent in Bean definition file of XML can be easily configured as well.

Also, when style is to be changed from directly defining a Bean for ObjectMapper to using Jackson2ObjectMapperFactoryBean, it should be noted that default value for the following configuration differs from the default value of Jackson (disabled).

When ObjectMapper operation and default Jackson operation are to be matched, the configuration above is enabled using featuresToEnable property.

<bean id="objectMapper" class="org.springframework.http.converter.json.Jackson2ObjectMapperFactoryBean">
    <!-- ... -->
    <property name="featuresToEnable">
        <array>
            <util:constant static-field="com.fasterxml.jackson.databind.MapperFeature.DEFAULT_VIEW_INCLUSION"/>
            <util:constant static-field="com.fasterxml.jackson.databind.DeserializationFeature.FAIL_ON_UNKNOWN_PROPERTIES"/>
        </array>
    </property>
</bean>

For Jackson2ObjectMapperFactoryBean details, refer JavaDoc of Jackson2ObjectMapperFactoryBean.

Note

Points to be noted when changing the jackson version from 1.x.x to 2.x.x

Changed package

version package

1.x.x

org.codehaus.jackson

2.x.x

com.fasterxml.jackson

Please note that configuration of subordinate package also is also changed.

Deprecated List

http://fasterxml.github.io/jackson-core/javadoc/2.8/deprecated-list.html

http://fasterxml.github.io/jackson-databind/javadoc/2.8/deprecated-list.html

http://fasterxml.github.io/jackson-annotations/javadoc/2.8/deprecated-list.html

5.1.4.3.2. Servlet settings for RESTful Web Service ¶

When RESTful Web Service and client application are built as separate Web applications, the settings are as follows:

When RESTful Web Service and client application are to be built as same Web application, it is necessary to perform “Settings when RESTful Web Service and client application are operated as the same Web application” .

web.xml

<servlet>
    
    <servlet-name>restAppServlet</servlet-name>
    <servlet-class>org.springframework.web.servlet.DispatcherServlet</servlet-class>
    <init-param>
        <param-name>contextConfigLocation</param-name>
        
        <param-value>classpath*:META-INF/spring/spring-mvc-rest.xml</param-value>
    </init-param>
    <load-on-startup>1</load-on-startup>
</servlet>

<servlet-mapping>
    <servlet-name>restAppServlet</servlet-name>
    <url-pattern>/api/v1/*</url-pattern>
</servlet-mapping>


Sr. No. Description

(1)

Specify a name which shows that it is a RESTful Web Service servlet, in <servlet-name> element.

In the above example, "restAppServlet" is specified as the servlet name.

(2)

Specify a Spring MVC bean definition file used to build DispatcherServlet for RESTful Web Service.

In the above example, META-INF/spring/spring-mvc-rest.xml in class path, is specified as the Spring MVC bean definition file.

(3)

Specify a servlet path pattern to be mapped with the DispatcherServlet of RESTful Web Service.

In the above example, the servlet path under "/api/v1/" is mapped with the DispatcherServlet for RESTful Web Service.

Typically, servlet paths like

"/api/v1/"

"/api/v1/members"

"/api/v1/members/xxxxx"

are mapped in the DispatcherServlet("restAppServlet") for RESTful Web Service.

Tip

Value specified in the value attribute of @RequestMapping annotation

For the value to be specified in value attribute of @RequestMapping annotation, specify the value assigned to the part of wild card (*) in <url-pattern> element.

For example, when @RequestMapping(value = "members") is specified, it is deployed as the method to perform a process for path "/api/v1/members". Therefore, it is not necessary to specify the path ("api/v1") in value attribute of @RequestMapping annotation for mapping to divided servlets.

When @RequestMapping(value = "api/v1/members") is specified, it gets deployed as the method that performs a process for the "/api/v1/api/v1/members" path. Hence, please take note of same.

5.1.4.4. REST API implementation ¶

How to implement REST API is explained here.

Hereafter, REST API implementation example is explained using member information (Member resource) of a shopping site.

Note

Domain layer implementation is not explained in this section, however, it is sent as attachment “Source code of the domain layer class created at the time of REST API implementation”.

Please refer if required.

REST API specifications used in this explanation are as shown below.

Resource format

The resource format of member information should be the following JSON format.

In the following example, although all the fields are displayed, they are not used in the requests and responses of all API.

For example, "password" is used only in requests whereas "createdAt" or "lastModifiedAt" are used only in responses.
{
    "memberId" : "M000000001",
    "firstName" : "Firstname",
    "lastName" : "Lastname",
    "genderCode" : "1",
    "dateOfBirth" : "1977-03-13",
    "emailAddress" : "user1@test.com",
    "telephoneNumber" : "09012345678",
    "zipCode" : "1710051",
    "address" : "Tokyo",
    "credential" : {
        "signId" : "user1@test.com",
        "password" : "zaq12wsx",
        "passwordLastChangedAt" : "2014-03-13T04:39:14.831Z",
        "lastModifiedAt" : "2014-03-13T04:39:14.831Z"
    },
    "createdAt" : "2014-03-13T04:39:14.831Z",
    "lastModifiedAt" : "2014-03-13T04:39:14.831Z"
}
Note

This section illustrates an example wherein a hypermedia link for related resource is not provided. For details on implementation with hypermedia link, refer to “Implementing hypermedia link”.

Specifications of resource fields

The specifications for each field of a resource (JSON) are as shown below.

Sr. No. Item name Type I/O specifications Number of digits (min-max) Other specifications

(1)

memberId String I/O 10-10 It should be “Unspecified” (NULL) at the time of request for POST Members.

(2)

firstName String I/O 1-128 -

(3)

lastName String I/O 1-128 -

(4)

genderCode

String

(Code)

I/O 1-1

"0" : UNKNOWN

"1" : MEN

"2" : WOMEN

(5)

dateOfBirth Date I/O -

yyyy-MM-dd format

(extended ISO-8601 format)

(6)

emailAddress

String

(E-mail)

I/O 1-256 -

(7)

telephoneNumber String I/O 0-20 -

(8)

zipCode String I/O 0-20 -

(9)

address String I/O 0-256 -

(10)

credential

Object

(MemberCredential)

I/O - It is specified at the time of request for POST Members.

(11)

credential/signId

String

(E-mail)

I/O 0-256 emailAddress value is applied when not specified.

(12)

credential/

password

String I 8-32 -

(13)

credential/

passwordLastChangedAt

Timestamp

with time-zone

O -

yyyy-MM-dd’T’HH:mm:ss.SSS’Z’ format

(extended ISO-8601 format)

(14)

credential/

lastModifiedAt

Timestamp

with time-zone

O -

yyyy-MM-dd’T’HH:mm:ss.SSS’Z’format

(extended ISO-8601 format)

(15)

createdAt

Timestamp

with time-zone

O -

yyyy-MM-dd’T’HH:mm:ss.SSS’Z’ format

(extended ISO-8601 format)

(16)

lastModifiedAt

Timestamp

with time-zone

O -

yyyy-MM-dd’T’HH:mm:ss.SSS’Z’ format

(extended ISO-8601 format)

REST APIs List

APIs given below are used as the REST API to be implemented.

Sr. No.

API name

HTTP

Method

Resource path

Status

Code

API Overview

(1)

GET Members GET /api/v1/members

200

(OK)

Page is searched for Member resource that matches the condition.

(2)

POST Members POST /api/v1/members

201

(Created)

One Member resource is created.

(3)

GET Member GET /api/v1/members/{memberId}

200

(OK)

One Member resource is fetched.

(4)

PUT Member PUT /api/v1/members/{memberId}

200

(OK)

One Member resource is updated.

(5)

DELETE Member DELETE /api/v1/members/{memberId}

204

(No Content)

One Member resource is deleted.

Note

From Spring Framework 4.3, REST API for HEAD and OPTIONS methods is now implicitly provided, so developers do not need to explicitly implement these REST APIs.

Since the OPTIONS itself is not included in the Allow header that the implicitly prepared REST API for OPTIONS responds to, please note that it differs from the implementation example introduced in the development guidelines up to TERASOLUNA Server Framework for Java 5.2.x.

5.1.4.4.1. Creating REST API packages ¶

Create a package to store REST API class.

It is recommended to assign api as the package name for the root package that stores REST API class and to create a package for each resource (lower case of resource name) under the same.

Resource name in the explanation is Member. Hence, the package name is org.terasoluna.examples.rest.api.member.

Note

Usually, following 4 types of classes are stored in the created package. It is recommended to use the following naming rules for name of the class to be created.

[Resource name]Resource

[Resource name]RestController

[Resource name]Validator (created when required)

[Resource name]Helper (created when required)

In the explanation, name of the resource is Member. As a result, the respective names will be as below.

MemberResource

MemberRestController

MemberValidator

MemberHelper

When handling a related resource, it is advisable to place the class for related resource also in the same package.

It is recommended to create a package named common that stores common parts for REST API just under the root package that stores the REST API class and to create sub packages at functionality level.
For example, a sub package that stores common parts which perform error handling is created with the name error.
The class for exception handling created in the subsequent explanation, is stored in a package called org.terasoluna.examples.rest.api.common.error.

Note

As long as it is clear that the package is storing common parts, it can have a name other than common.

5.1.4.4.2. Creating Resource class ¶

In this guideline, it is recommended to provide a Resource class as the class representing the resource published on Web (represent JSON or XML).

Note

Reasons for creating a Resource class

The reason for creating a Resource class regardless of DomainObject class (for example, Entity class) being available is, user interface information (UI) which is used in the I/O with client and information handled by business process do not necessarily match.

If these are mixed and then used, the application layer may affect the domain layer, resulting in deteriorated maintainability. It is recommended to create the DomainObject and Resource class separately and convert data by using BeanMapper like Dozer etc.

Role of Resource class is as follows:

Sr. No. Roles Description

(1)

To define the data structure of a resource.

Define a data structure of the resource published on Web.

Generally, it is very rare to publish the data structure managed by persistence layer of database etc. as it is, as a resource on Web.

(2)

To define format.

Specify a definition related to resource format using annotation.

Annotation to be used differs according to the resource format (JSON/XML etc.). Jackson annotation is used for JSON format whereas JAXB annotation is used for XML format.

(3)

To define input validation rules.

Specify input validation rules for single item of each field by using Bean Validation annotation.

For input validation details, refer to “Input Validation” .
Warning

Measures to circular reference

When you serialize a Resource class (JavaBean) in JSON or XML format and if property holds an object of cross reference relationship, the StackOverflowError and OutOfMemoryError occur due to circular reference, hence it is necessary to exercise caution.

In order to avoid a circular reference,

@com.fasterxml.jackson.annotation.JsonIgnore annotation to exclude the property from serialization in case of serialized in JSON format using the Jackson

@javax.xml.bind.annotation.XmlTransient annotation to exclude the property from serialization in case of serialized in XML format using the JAXB

can be added.

An example to exclude specific field from serialization while serializing in JSON format using Jackson is given below.
public class Order {
    private String orderId;
    private List<OrderLine> orderLines;
    // ...
}
public class OrderLine {
    @JsonIgnore
    private Order order;
    private String itemCode;
    private int quantity;
    // ...
}
Sr. No. Description

(1)

Add @JsonIgnore annotation to exclude the property from serialization.

Example of Resource class creation is shown below.

MemberResource.java

package org.terasoluna.examples.rest.api.member;

import java.io.Serializable;

import javax.validation.Valid;
import javax.validation.constraints.NotNull;
import javax.validation.constraints.Null;
import javax.validation.constraints.Past;
import javax.validation.constraints.Size;

import org.hibernate.validator.constraints.Email;
import org.hibernate.validator.constraints.NotEmpty;
import org.joda.time.DateTime;
import org.joda.time.LocalDate;
import org.springframework.format.annotation.DateTimeFormat;
import org.terasoluna.gfw.common.codelist.ExistInCodeList;

// (1)
public class MemberResource implements Serializable {

    private static final long serialVersionUID = 1L;

    // (2)
    interface PostMembers {
    }

    interface PutMember {
    }

    @Null(groups = PostMembers.class)
    @NotEmpty(groups = PutMember.class)
    @Size(min = 10, max = 10, groups = PutMember.class)
    private String memberId;

    @NotEmpty
    @Size(max = 128)
    private String firstName;

    @NotEmpty
    @Size(max = 128)
    private String lastName;

    @NotEmpty
    @ExistInCodeList(codeListId = "CL_GENDER")
    private String genderCode;

    @NotNull
    @Past
    private LocalDate dateOfBirth;

    @NotEmpty
    @Size(max = 256)
    @Email
    private String emailAddress;

    @Size(max = 20)
    private String telephoneNumber;

    @Size(max = 20)
    private String zipCode;

    @Size(max = 256)
    private String address;

    @NotNull(groups = PostMembers.class)
    @Null(groups = PutMember.class)
    @Valid
    // (3)
    private MemberCredentialResource credential;

    @Null
    private DateTime createdAt;

    @Null
    private DateTime lastModifiedAt;

    // omitted setter and getter

}

Sr. No.	Description
(1)	JavaBean representing the Member resource.
(2)	The interface for specifying validation group of Bean Validation is defined. In this implementation, input validation is grouped, as different input validations are performed for POST and PUT methods. Refer to “Input Validation” for grouped validation.
(3)	JavaBean with nested related resource is defined in the field. In this implementation, the member credentials (sign ID and password) are handled as related resources. These are extracted as related resources by considering operations that carry out only the sign ID change and password change. However, REST API implementation for related resources is omitted here.

MemberCredentialResource.java

package org.terasoluna.examples.rest.api.member;

import java.io.Serializable;

import javax.validation.constraints.NotNull;
import javax.validation.constraints.Null;
import javax.validation.constraints.Size;

import com.fasterxml.jackson.annotation.JsonInclude;
import org.hibernate.validator.constraints.Email;
import org.joda.time.DateTime;

// (4)
public class MemberCredentialResource implements Serializable {

    private static final long serialVersionUID = 1L;

    @Size(max = 256)
    @Email
    private String signId;

    // (5)
    @JsonInclude(JsonInclude.Include.NON_NULL)
    @NotNull
    @Size(min = 8, max = 32)
    private String password;

    @Null
    private DateTime passwordLastChangedAt;

    @Null
    private DateTime lastModifiedAt;

    // omitted setter and getter

}

Sr. No.	Description
(4)	JavaBean that represents Credential resource which is the related resource of Member resource.
(5)	An annotation is specified so that the field itself is not output in JSON when the value is `null`. It is specified so that the field ‘password’ is not output in responding JSON. In the above example, it is restricted to (`Inclusion.NON_NULL`) for NULL value, however it can also be specified as (`Inclusion.NON_EMPTY`) in case of an empty value.

Adding the mapping definition of Bean

In the subsequent implementations, Entity class and Resource class are copied by using “Bean Mapping (Dozer)” .

Joda-Time classes namely, org.joda.time.DateTime and org.joda.time.LocalDate are included in the JavaBean shown above. However, Joda-Time objects are not correctly copied if “Bean Mapping (Dozer)” is used for copying.

Therefore, it is necessary to apply “How to copy Joda-Time classes using Dozer” to copy the objects correctly.

5.1.4.4.3. Creating Controller class ¶

Create controller class for each resource.

Refer to Appendix for the source code when implementation of all APIs is completed.

package org.terasoluna.examples.rest.api.member;

// omitted
import org.springframework.web.bind.annotation.RestController;
// omitted

@RequestMapping("members") // (1)
@RestController // (2)
public class MemberRestController {

    // omitted ...

}
Sr. No. Description

(1)

Map resource collection URI (Servlet path) for Controller.

Typically, specify a servlet path indicating a collection of resources in the value attribute of @RequestMapping annotation.

In the above example, a servlet path called /api/v1/members is mapped.

(2)

Assign @RestController annotation for Controller.

Assigning @RestController annotation has same meaning of:

Assigning org.springframework.stereotype.Controller annotation in a class

Assigning @org.springframework.web.bind.annotation.ResponseBody annotation in Controller method which is described later.

By assigning @ResponseBody to Controller method, the returned Resource object is marshalled in JSON or XML and set in response body.
Tip

@RestController is an annotation added from Spring Framework 4.0.

Due to @RestController annotation, it is not necessary to assign @ResponseBody annotation to each method of Controller. Hence, it is possible to create Controller for REST API in a simple way. For details about @RestController annotation refer to: Here.

An example to create a Controller for REST API by combining @Controller annotation and @ResponseBody annotation in a conventional way is given below.
@RequestMapping("members")
@Controller
public class MemberRestController {

    @RequestMapping(method = RequestMethod.GET)
    @ResponseStatus(HttpStatus.OK)
    @ResponseBody
    public Page<MemberResource> getMembers() {
        // ...
    }

    // ...

}

5.1.4.4.4. Implementing REST API that fetches collection of resources ¶

Example to implement the REST API wherein a page search is performed for member resource collection specified by URI.

Creating the JavaBean for receiving search conditions

When search conditions are necessary to fetch resource collection, create a JavaBean for receiving the search conditions.

// (1)
public class MembersSearchQuery implements Serializable {
    private static final long serialVersionUID = 1L;

    // (2)
    @NotEmpty
    private String name;

    public String getName() {
        return name;
    }

    public void setName(String name) {
        this.name = name;
    }

}
Sr. No. Description

(1)

Create a JavaBean for receiving search conditions.

When search conditions are not necessary, JavaBean need not be created.

(2)

Match the property name with the parameter name of request parameter.

In the above example, value "John" is set in the name property of JavaBean for request /api/v1/members?name=John.

REST API implementation

Implement a process wherein page search is performed for a collection of Member resources.

@RequestMapping("members")
@RestController
public class MemberRestController {

    // omitted

    @Inject
    MemberService memberService;

    @Inject
    Mapper beanMapper;

    // (3)
    @RequestMapping(method = RequestMethod.GET)
    // (4)
    @ResponseStatus(HttpStatus.OK)
    public Page<MemberResource> getMembers(
            // (5)
            @Validated MembersSearchQuery query,
            // (6)
            Pageable pageable) {

        // (7)
        Page<Member> page = memberService.searchMembers(query.getName(), pageable);

        // (8)
        List<MemberResource> memberResources = new ArrayList<>();
        for (Member member : page.getContent()) {
            memberResources.add(beanMapper.map(member, MemberResource.class));
        }
        Page<MemberResource> responseResource = new PageImpl<>(memberResources,
                pageable, page.getTotalElements());

        // (9)
        return responseResource;
    }

    // omitted

}
Sr. No. Description
(3)

Specify RequestMethod.GET in method attribute of @RequestMapping annotation.
(4)
Assign @org.springframework.web.bind.annotation.ResponseStatus as method annotation and specify the status code returned as response.

Set 200 (OK) in the value attribute of @ResponseStatus annotation.
Tip

How to specify the status code

A fixed status code sent as response is specified in this example using @ResponseStatus annotation. However, it can also be specified in Controller logic.
public ResponseEntity<Page<MemberResource>> getMembers(
        @Validated MembersSearchQuery query,
        Pageable pageable) {

    // omitted

    return ResponseEntity.ok().body(responseResource);
}
When it is necessary to change the responding status codes based on process details or process results, org.springframework.http.ResponseEntity is used, as shown in the above implementation.
(5)

Specify a JavaBean for receiving search conditions as an argument.

When input validation is necessary, assign @Validated as argument annotation. For input validation details, refer to “Input Validation”.

(6)

When page search is necessary, specify org.springframework.data.domain.Pageable as an argument.

For page search details, refer to “Pagination”.

(7)

Call Service method of domain layer and fetch resource information (Entity etc.) matching with the condition.

For domain layer implementation, refer to “Domain Layer Implementation”.

(8)

Generate resource object that retains information published on the Web based on the resource information matching with the conditions (Entity etc.).

By using org.springframework.data.domain.PageImpl class while sending page search result as response, the fields that are necessary as response at the time of page search, can be sent to the client.

In the above example, a Resource object is being generated from Entity by using Bean mapping library. For details on Bean mapping library, refer to “Bean Mapping (Dozer)” .

When the quantity of code for generating Resource objects is more, it is recommended to create a method for generating Resource object in Helper class.

(9)

Return a Resource object generated in (8).

The object returned here is marshalled in JSON or XML and set in response body.
Response at the time of using PageImpl class is as below.

Highlighted portion shows the fields specific for page search.
{
  "content" : [ {
    "memberId" : "M000000001",
    "firstName" : "John",
    "lastName" : "Smith",
    "genderCode" : "1",
    "dateOfBirth" : "1977-03-07",
    "emailAddress" : "john.smith@test.com",
    "telephoneNumber" : "09012345678",
    "zipCode" : "1710051",
    "address" : "Tokyo",
    "credential" : {
      "signId" : "john.smit@test.com",
      "passwordLastChangedAt" : "2014-03-13T10:18:08.003Z",
      "lastModifiedAt" : "2014-03-13T10:18:08.003Z"
    },
    "createdAt" : "2014-03-13T10:18:08.003Z",
    "lastModifiedAt" : "2014-03-13T10:18:08.003Z"
  }, {
    "memberId" : "M000000002",
    "firstName" : "Sophia",
    "lastName" : "Smith",
    "genderCode" : "2",
    "dateOfBirth" : "1977-03-07",
    "emailAddress" : "sophia.smith@test.com",
    "telephoneNumber" : "09012345678",
    "zipCode" : "1710051",
    "address" : "Tokyo",
    "credential" : {
      "signId" : "sophia.smith@test.com",
      "passwordLastChangedAt" : "2014-03-13T10:18:08.003Z",
      "lastModifiedAt" : "2014-03-13T10:18:08.003Z"
    },
    "createdAt" : "2014-03-13T10:18:08.003Z",
    "lastModifiedAt" : "2014-03-13T10:18:08.003Z"
  } ],
  "last" : false,
  "totalPages" : 13,
  "totalElements" : 25,
  "size" : 2,
  "number" : 1,
  "sort" : [ {
    "direction" : "DESC",
    "property" : "lastModifiedAt",
    "ignoreCase" : false,
    "nullHandling": "NATIVE",
    "ascending" : false
  } ],
  "numberOfElements" : 2,
  "first" : false
}
Note

Points to be noted due to changes in API specifications of Spring Data Commons

In case of “terasoluna-gfw-common 5.0.0.RELEASE or later version” dependent spring-data-commons (1.9.1 RELEASE or later), there is a change in API specifications of interface for page search functionality (org.springframework.data.domain.Page) and class (org.springframework.data.domain.PageImpl and org.springframework.data.domain.Sort.Order).

Specifically,

In Page interface and PageImpl class, isFirst() and isLast() methods are added in spring-data-commons 1.8.0.RELEASE, and isFirstPage() and isLastPage() methods are deleted from spring-data-commons 1.9.0.RELEASE.

In Sort.Order class, nullHandling property is added in spring-data-commons 1.8.0.RELEASE.

When using Page interface (PageImpl class) as resource object of REST API, that application may also need to be modified, as JSON and XML format get changed.

Adding Bean mapping definition

In the above implementation, Member object and MemberResource object are copied by using “Bean Mapping (Dozer)” .

It is not necessary to add Bean mapping definition when simply a copy of field value can be used. However, in the above implementation, the setting needs to be such that credential.password is not copied while copying Member object details to MemberResource object.

It is necessary to add Bean mapping definition so that specific fields are not copied.

<?xml version="1.0" encoding="UTF-8"?>
<mappings xmlns="http://dozer.sourceforge.net" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://dozer.sourceforge.net
          http://dozer.sourceforge.net/schema/beanmapping.xsd">

    <mapping type="one-way">
        <class-a>org.terasoluna.examples.rest.domain.model.MemberCredential</class-a>
        <class-b>org.terasoluna.examples.rest.api.member.MemberCredentialResource</class-b>
        
        <field-exclude>
            <a>password</a>
            <b>password</b>
        </field-exclude>
    </mapping>

</mappings>
Sr. No. Description

(11)

Create a file that defines mapping rules for Member object and MemberResource object.

It is recommended to create a mapping definition file of Dozer for each resource.

In this implementation, it is stored in /xxx-web/src/main/resources/META-INF/dozer/memberResource-mapping.xml.

(12)

In the above example, password field is not copied while copying the details of MemberCredential which is a related entity of Member, to MemberCredentialResource, a related resource of MemberResource.

For Bean mapping definition methods, refer to “Bean Mapping (Dozer)” .

Request example

GET /rest-api-web/api/v1/members?name=Smith&page=0&size=2 HTTP/1.1
Accept: text/plain, application/json, application/*+json, */*
User-Agent: Java/1.7.0_51
Host: localhost:8080
Connection: keep-alive

Response Example

HTTP/1.1 200 OK
Server: Apache-Coyote/1.1
X-Track: fb63a6d446f849feb8ccaa4c9a794333
Content-Type: application/json;charset=UTF-8
Transfer-Encoding: chunked
Date: Thu, 13 Mar 2014 11:10:43 GMT

{"content":[{"memberId":"M000000001","firstName":"John","lastName":"Smith","genderCode":"1","dateOfBirth":"2013-03-13","emailAddress":"user1394709042120@test.com","telephoneNumber":"09012345678","zipCode":"1710051","address":"Tokyo","credential":{"signId":"user1394709042120@test.com","passwordLastChangedAt":"2014-03-13T11:10:43.066Z","lastModifiedAt":"2014-03-13T11:10:43.066Z"},"createdAt":"2014-03-13T11:10:43.066Z","lastModifiedAt":"2014-03-13T11:10:43.066Z"},{"memberId":"M000000002","firstName":"Sophia","lastName":"Smith","genderCode":"2","dateOfBirth":"2013-03-13","emailAddress":"user1394709043663@test.com","telephoneNumber":"09012345678","zipCode":"1710051","address":"Tokyo","credential":{"signId":"user1394709043663@test.com","passwordLastChangedAt":"2014-03-13T11:10:43.678Z","lastModifiedAt":"2014-03-13T11:10:43.678Z"},"createdAt":"2014-03-13T11:10:43.678Z","lastModifiedAt":"2014-03-13T11:10:43.678Z"}],"last":true,"totalPages":1,"totalElements":2,"size":2,"number":0,"sort":null,"numberOfElements":2,"first":true}

Tip

When page search is not necessary, Resource class list may be handled directly.

Following is the definition of the Controller method used when handling the list of Resource class directly.

@RequestMapping(method = RequestMethod.GET)
@ResponseStatus(HttpStatus.OK)
public List<MemberResource> getMembers(
        @Validated MembersSearchQuery query) {
    // omitted
}

JSON is as follows when list of Resource class is directly handled.

[ {
    "memberId" : "M000000001",
    "firstName" : "John",
    "lastName" : "Smith",
    "genderCode" : "1",
    "dateOfBirth" : "1977-03-07",
    "emailAddress" : "john.smith@test.com",
    "telephoneNumber" : "09012345678",
    "zipCode" : "1710051",
    "address" : "Tokyo",
    "credential" : {
      "signId" : "john.smit@test.com",
      "passwordLastChangedAt" : "2014-03-13T10:18:08.003Z",
      "lastModifiedAt" : "2014-03-13T10:18:08.003Z"
    },
    "createdAt" : "2014-03-13T10:18:08.003Z",
    "lastModifiedAt" : "2014-03-13T10:18:08.003Z"
}, {
    "memberId" : "M000000002",
    "firstName" : "Sophia",
    "lastName" : "Smith",
    "genderCode" : "2",
    "dateOfBirth" : "1977-03-07",
    "emailAddress" : "sophia.smith@test.com",
    "telephoneNumber" : "09012345678",
    "zipCode" : "1710051",
    "address" : "Tokyo",
    "credential" : {
      "signId" : "sophia.smith@test.com",
      "passwordLastChangedAt" : "2014-03-13T10:18:08.003Z",
      "lastModifiedAt" : "2014-03-13T10:18:08.003Z"
    },
    "createdAt" : "2014-03-13T10:18:08.003Z",
    "lastModifiedAt" : "2014-03-13T10:18:08.003Z"
} ]

5.1.4.4.5. Implementing REST API that adds a resource to collection ¶

Example of implementation of REST API wherein a specified Member resource is created and added to the collection is given below.

REST API implementation

Implement a process that creates specified Member resource and adds it to the collection.

@RequestMapping("members")
@RestController
public class MemberRestController {

    // omitted

    // (1)
    @RequestMapping(method = RequestMethod.POST)
    // (2)
    @ResponseStatus(HttpStatus.CREATED)
    public MemberResource postMember(
            // (3)
            @RequestBody @Validated({ PostMembers.class, Default.class })
            MemberResource requestedResource) {

        // (4)
        Member inputMember = beanMapper.map(requestedResource, Member.class);
        Member createdMember = memberService.createMember(inputMember);

        MemberResource responseResource = beanMapper.map(createdMember,
                MemberResource.class);

        return responseResource;
    }

    // omitted

}
Sr. No. Description

(1)

Specify RequestMethod.POST in the method attribute of @RequestMapping annotation.

(2)

Assign @ResponseStatus annotation as method annotation and specify responding status code.

Set 201(Created) in the value attribute of @ResponseStatus annotation.

(3)

Specify JavaBean (Resource class) that receives information of newly created resource as an argument.

Assign @org.springframework.web.bind.annotation.RequestBody as argument annotation.

By assigning @RequestBody annotation, JSON or XML data set in request Body is unmarshalled in Resource object.

Assign @Validated annotation as argument annotation to enable input validation. For details on input validation, refer to “Input Validation” .

(4)

Call Service method of domain layer and create a new resource.

For domain layer implementation, refer to “Domain Layer Implementation”.

Request example

POST /rest-api-web/api/v1/members HTTP/1.1
Accept: text/plain, application/json, application/*+json, */*
Content-Type: application/json;charset=UTF-8
User-Agent: Java/1.7.0_51
Host: localhost:8080
Connection: keep-alive
Content-Length: 248

{"firstName":"John","lastName":"Smith","genderCode":"1","dateOfBirth":"2013-03-13","emailAddress":"user1394708306056@test.com","telephoneNumber":"09012345678","zipCode":"1710051","address":"Tokyo","credential":{"signId":null,"password":"zaq12wsx"}}

Response example

HTTP/1.1 201 Created
Server: Apache-Coyote/1.1
X-Track: c7e9c8a9aa4f40ff87f3acdb77baccdf
Content-Type: application/json;charset=UTF-8
Transfer-Encoding: chunked
Date: Thu, 13 Mar 2014 10:58:26 GMT

{"memberId":"M000000023","firstName":"John","lastName":"Smith","genderCode":"1","dateOfBirth":"2013-03-13","emailAddress":"user1394708306056@test.com","telephoneNumber":"09012345678","zipCode":"1710051","address":"Tokyo","credential":{"signId":"user1394708306056@test.com","passwordLastChangedAt":"2014-03-13T10:58:26.324Z","lastModifiedAt":"2014-03-13T10:58:26.324Z"},"createdAt":"2014-03-13T10:58:26.324Z","lastModifiedAt":"2014-03-13T10:58:26.324Z"}

5.1.4.4.6. Implementing REST API that fetches specified resource ¶

Implementation of REST API that fetches the Member resource specified by URI, is shown below.

REST API implementation

Implement a process that fetches the Member resource specified by URI.

@RequestMapping("members")
@RestController
public class MemberRestController {

    // omitted

    // (1)
    @RequestMapping(value = "{memberId}", method = RequestMethod.GET)
    // (2)
    @ResponseStatus(HttpStatus.OK)
    public MemberResource getMember(
            // (3)
            @PathVariable("memberId") String memberId) {

        // (4)
        Member member = memberService.getMember(memberId);

        MemberResource responseResource = beanMapper.map(member,
                MemberResource.class);

        return responseResource;
    }

    // omitted

}
Sr. No. Description

(1)

Specify path variable ({memberId} in the example above) in value attribute whereas RequestMethod.GET in method attribute of @RequestMapping annotation.

A value that uniquely identifies the resource is specified in {memberId}.

(2)

Assign @ResponseStatus annotation as method annotation and specify the responding status code.

Set 200 (OK) in value attribute of @ResponseStatus annotation.

(3)

Fetch the value that uniquely identifies the resource from path variable.

Value specified in path variable ({memberId}) can be received as method argument by specifying @PathVariable("memberId") as argument annotation.

For details on path variable, refer to “Retrieving values from URL path”.

In the above example, when URI is /api/v1/members/M12345, "M12345" is stored in memberId of argument.

(4)

Call Service method of domain layer and acquire the resource information (Entity etc.) that matches with the ID fetched from path variable.

For domain layer implementation, refer to “Domain Layer Implementation”.

Request example

GET /rest-api-web/api/v1/members/M000000003 HTTP/1.1
Accept: text/plain, application/json, application/*+json, */*
User-Agent: Java/1.7.0_51
Host: localhost:8080
Connection: keep-alive

Response Example

HTTP/1.1 200 OK
Server: Apache-Coyote/1.1
X-Track: 275b4e7a61f946eea47672f272315ac2
Content-Type: application/json;charset=UTF-8
Transfer-Encoding: chunked
Date: Thu, 13 Mar 2014 11:25:13 GMT

{"memberId":"M000000003","firstName":"John","lastName":"Smith","genderCode":"1","dateOfBirth":"2013-03-13","emailAddress":"user1394709913496@test.com","telephoneNumber":"09012345678","zipCode":"1710051","address":"Tokyo","credential":{"signId":"user1394709913496@test.com","passwordLastChangedAt":"2014-03-13T11:25:13.762Z","lastModifiedAt":"2014-03-13T11:25:13.762Z"},"createdAt":"2014-03-13T11:25:13.762Z","lastModifiedAt":"2014-03-13T11:25:13.762Z"}

5.1.4.4.7. Implementing REST API that updates specified resource ¶

Implementation of REST API that updates the Member resource specified in URI, is shown below.

REST API implementation

Implement a process that updates the Member resource specified in URI.

@RequestMapping("members")
@RestController
public class MemberRestController {

    // omitted

    // (1)
    @RequestMapping(value = "{memberId}", method = RequestMethod.PUT)
    // (2)
    @ResponseStatus(HttpStatus.OK)
    public MemberResource putMember(
            @PathVariable("memberId") String memberId,
            // (3)
            @RequestBody @Validated({ PutMember.class, Default.class })
            MemberResource requestedResource) {

        // (4)
        Member inputMember = beanMapper.map(
            requestedResource, Member.class);
        Member updatedMember = memberService.updateMember(
            memberId, inputMember);

        MemberResource responseResource = beanMapper.map(updatedMember,
                MemberResource.class);

        return responseResource;
    }

    // omitted

}
Sr. No. Description

(1)

Specify path variable ({memberId}in the example above) in value attribute whereas RequestMethod.PUT in “method” attribute of @RequestMapping annotation.

Value that uniquely identifies the resource is specified in {memberId}.

(2)

Assign @ResponseStatusannotation as method annotation and specify the responding status code.

Set 200 (OK) in value attribute of @ResponseStatus annotation.

(3)

Specify JavaBean (Resource class) for receiving the details of resource update as an argument.

By assigning @RequestBody annotation as argument annotation, JSON or XML data set in request Body is unmarshalled in Resource object.

Assign @Validated annotation as argument annotation to enable input validation.

For details on input validation, refer to “Input Validation” .

(4)

Call Service method of domain layer and update the resource information (Entity etc.) matching with the ID fetched from path variable.

For domain layer implementation, refer to “Domain Layer Implementation”.

Request example

PUT /rest-api-web/api/v1/members/M000000004 HTTP/1.1
Accept: text/plain, application/json, application/*+json, */*
Content-Type: application/json;charset=UTF-8
User-Agent: Java/1.7.0_51
Host: localhost:8080
Connection: keep-alive
Content-Length: 221

{"memberId":"M000000004","firstName":"John","lastName":"Smith","genderCode":"1","dateOfBirth":"2013-03-08","emailAddress":"user1394710559584@test.com","telephoneNumber":"09012345678","zipCode":"1710051","address":"Tokyo"}

Response example

HTTP/1.1 200 OK
Server: Apache-Coyote/1.1
X-Track: 5e8fea3aae044e94bf20a293e155af57
Content-Type: application/json;charset=UTF-8
Transfer-Encoding: chunked
Date: Thu, 13 Mar 2014 11:35:59 GMT

{"memberId":"M000000004","firstName":"John","lastName":"Smith","genderCode":"1","dateOfBirth":"2013-03-08","emailAddress":"user1394710559584@test.com","telephoneNumber":"09012345678","zipCode":"1710051","address":"Tokyo","credential":{"signId":"user1394710559584@test.com","passwordLastChangedAt":"2014-03-13T11:35:59.847Z","lastModifiedAt":"2014-03-13T11:35:59.847Z"},"createdAt":"2014-03-13T11:35:59.847Z","lastModifiedAt":"2014-03-13T11:36:00.122Z"}

5.1.4.4.8. Implementing REST API that deletes specified resource ¶

Implementation of REST API that deletes the Member resource specified by URI is as follows:

REST API implementation

Implement a process that deletes the Member resource specified by URI.

@RequestMapping("members")
@RestController
public class MemberRestController {

    // omitted

    // (1)
    @RequestMapping(value = "{memberId}", method = RequestMethod.DELETE)
    // (2)
    @ResponseStatus(HttpStatus.NO_CONTENT)
    public void deleteMember(
            @PathVariable("memberId") String memberId) {

        // (3)
        memberService.deleteMember(memberId);

    }

    // omitted

}
Sr. No. Description

(1)

Specify path variable ({memberId}in the example above) in value attribute and RequestMethod.DELETE in method attribute of @RequestMapping annotation.

(2)

Assign @ResponseStatus annotation as method annotation and specify the responding status code.

Set 204 (NO_CONTENT) in value attribute of @ResponseStatus annotation.

(3)

Call Service method of domain layer and delete resource information (Entity etc.) matching with the ID fetched from path variable.

For domain layer implementation, refer to “Domain Layer Implementation”.

Note

To set deleted resource information in response BODY, set (200) OK in the status code.

Request example

DELETE /rest-api-web/api/v1/members/M000000005 HTTP/1.1
Accept: text/plain, application/json, application/*+json, */*
User-Agent: Java/1.7.0_51
Host: localhost:8080
Connection: keep-alive

Response example

HTTP/1.1 204 No Content
Server: Apache-Coyote/1.1
X-Track: e06c5bd40c864a299c48d9be3f12b2c0
Date: Thu, 13 Mar 2014 11:40:05 GMT

5.1.4.5. Implementing exception handling ¶

How to handle the exceptions occurring in RESTful Web Service is explained below.

RESTful Web Service oriented generic exception handling feature is not provided in Spring MVC.
Alternately, (org.springframework.web.servlet.mvc.method.annotation.ResponseEntityExceptionHandler) is provided as the class that assists in implementing exception handling for RESTful Web Service.
This guideline recommends a common exception handling method, by creating an exception handling class that inherits the Spring MVC class and assigning @ControllerAdvice annotation to this exception handling class.

Method that handles exceptions in Spring MVC framework is implemented in advance in ResponseEntityExceptionHandler by using @ExceptionHandler annotation.
Therefore, individual handling of the exceptions in Spring MVC framework need not be implemented.
Further, HTTP status codes corresponding to the exceptions handled by ResponseEntityExceptionHandler are set by the same specifications as DefaultHandlerExceptionResolver.
For handled exceptions and HTTP status codes thus set, refer to “HTTP response code set by DefaultHandlerExceptionResolver”.

Although an empty response BODY is returned by default implementation of ResponseEntityExceptionHandler, it can be extended so as to output error information in the response Body.

This guideline recommends to output appropriate error information in the response Body.

Process flow wherein, exception handling class that inherits ResponseEntityExceptionHandler is created and common exception handling is performed, is described before explaining the typical implementation.

Please note that, separate implementation is required for the part marked in red frame.

Sr. No. Processing layer Description

(1)

(2)

Spring MVC

(Framework)

Spring MVC receives a request from client and calls REST API.

(3)

An exception occurs during REST API process.

The exception occurred is caught by Spring MVC.

(4)

Spring MVC delegates the process to exception handling class.

(5)

Custom Exception Handler

(Common Component)

An error object that retains error information is generated in the exception handling class and returned to Spring MVC.

(6)

Spring MVC

(Framework)

Spring MVC converts the error object to JSON format message using HttpMessageConverter.

(7)

Spring MVC sets the JSON format error message in response BODY and sends response to the client.

5.1.4.5.1. Implementation to output error information in response Body ¶

Error information should be in the following JSON format.

{
  "code" : "e.ex.fw.7001",
  "message" : "Validation error occurred on item in the request body.",
  "details" : [ {
    "code" : "ExistInCodeList",
    "message" : "\"genderCode\" must exist in code list of CL_GENDER.",
    "target" : "genderCode"
  } ]
}

Create JavaBean that retains error information.

package org.terasoluna.examples.rest.api.common.error;

import java.io.Serializable;
import java.util.ArrayList;
import java.util.List;

import com.fasterxml.jackson.annotation.JsonInclude;

// (1)
public class ApiError implements Serializable {

    private static final long serialVersionUID = 1L;

    private final String code;

    private final String message;

    @JsonInclude(JsonInclude.Include.NON_EMPTY)
    private final String target; // (2)

    @JsonInclude(JsonInclude.Include.NON_EMPTY)
    private final List<ApiError> details = new ArrayList<>(); // (3)

    public ApiError(String code, String message) {
        this(code, message, null);
    }

    public ApiError(String code, String message, String target) {
        this.code = code;
        this.message = message;
        this.target = target;
    }

    public String getCode() {
        return code;
    }

    public String getMessage() {
        return message;
    }

    public String getTarget() {
        return target;
    }

    public List<ApiError> getDetails() {
        return details;
    }

    public void addDetail(ApiError detail) {
        details.add(detail);
    }

}
Sr. No. Description

(1)

Create a class for retaining error information.

In the above example, it is the class that retains lists of error codes, error messages, error targets and detailed error information.

(2)

Field that retains the value for identifying the target where error has occurred.

When an error occurs in input validation, there are cases where the value that identifies the field where error has occurred needs to be returned to the client.

In such cases, it is necessary to set a field that retains the field name where error has occurred.

(3)

Field that retains the list of detailed error information.

When an error occurs in input validation, it is necessary to return all the error information to the client as there are cases with multiple error causes.

In such cases, a field that lists and retains detailed error information is necessary.

Tip

When the value is null or empty, it is possible to avoid fields being output to JSON by specifying @JsonInclude(JsonInclude.Include.NON_EMPTY) in the field. When the condition to disable field output is to be restricted to null, it is advisable to specify @JsonInclude(JsonInclude.Include.NON_NULL).

Create a class for generating JavaBean that retains error information.

Refer to Appendix for the source code when implementation of all exception handling is completed.
// (4)
@Component
public class ApiErrorCreator {

    @Inject
    MessageSource messageSource;

    public ApiError createApiError(WebRequest request, String errorCode,
            String defaultErrorMessage, Object... arguments) {
        // (5)
        String localizedMessage = messageSource.getMessage(errorCode,
                arguments, defaultErrorMessage, request.getLocale());
        return new ApiError(errorCode, localizedMessage);
    }

    // omitted

}
Sr. No. Description

(4)

If needed, create a class that provides the method for generating error information.

Creating this class is not mandatory. However, it is recommended to create it so as to clearly define the role division.

(5)

Fetch the error message from MessageSource.

For message management methods, refer to “Message Management”.

Tip

In the above example, org.springframework.web.context.request.WebRequest is received as an argument to support localization of messages. WebRequest is not necessary when message localization is not required.

The reason for using WebRequest as an argument instead of java.util.Locale is due to an additional requirement wherein, HTTP request details are to be embedded in the error message. When there is no such requirement to embed HTTP request details in error, Locale can also be used.

ResponseEntityExceptionHandler method is extended and the implementation to output error information in response Body is carried out.

Refer to Appendix for the source code when implementation for all exception handling is completed.
@ControllerAdvice // (6)
public class ApiGlobalExceptionHandler extends ResponseEntityExceptionHandler {

    @Inject
    ApiErrorCreator apiErrorCreator;

    @Inject
    ExceptionCodeResolver exceptionCodeResolver;

    // (7)
    @Override
    protected ResponseEntity<Object> handleExceptionInternal(Exception ex,
            Object body, HttpHeaders headers, HttpStatus status,
            WebRequest request) {
        final Object apiError;
        // (8)
        if (body == null) {
            String errorCode = exceptionCodeResolver.resolveExceptionCode(ex);
            apiError = apiErrorCreator.createApiError(request, errorCode, ex
                    .getLocalizedMessage());
        } else {
            apiError = body;
        }
        // (9)
        return ResponseEntity.status(status).headers(headers).body(apiError);
    }

    // omitted

}
Sr. No. Description

(6)

Create a class that inherits ResponseEntityExceptionHandler provided by Spring MVC and assign @ControllerAdvice annotation.

(7)

Override handleExceptionInternal method of ResponseEntityExceptionHandler.

(8)

When the JavaBean output to response Body is not specified, generate a JavaBean object that retains error information.

In the above example, the exception class changes the error code by using ExceptionCodeResolver provided by common library.

For setting example of ExceptionCodeResolver, refer to “Resolving error codes and messages using ExceptionCodeResolver” .

When the JavaBean output to response Body is specified, use the specified JavaBean as it is.

This process is implemented considering that error information is generated individually in the error handling process for each exception.

(9)

Set the error information generated in (8) in the ‘Body’ of HTTP Entity for response and then return the same.

Error information thus returned is converted to JSON using framework and sent as a response.

Appropriate values are set in the status code by ResponseEntityExceptionHandler provided by Spring MVC.

Refer to “HTTP response code set by DefaultHandlerExceptionResolver” for status codes that are set.

Tip

Attribute of @ControllerAdvice annotation added in Spring Framework 4.0

By specifying an attribute of @ControllerAdvice annotation, it has been improved to allow flexibility in specifying Controller to apply a method implemented in the class wherein @ControllerAdvice is assigned. For details about attribute refer to: Attribute of @ControllerAdvice.

Note

Points to be noted while using an attribute of @ControllerAdvice annotation

By using an attribute of @ControllerAdvice annotation, it is possible to share exception handling in respective granularity, however, it is advisable not to specify attribute of @ControllerAdvice annotation for exception handling of common application (class corresponding to ApiGlobalExceptionHandler class in the above example).

When an attribute is specified in @ControllerAdvice annotation assigned in ApiGlobalExceptionHandler , a part of exception handling may not be possible that occurs in framework process provided by Spring MVC.

Specifically, in ApiGlobalExceptionHandler class, exception handling is not possible for the exceptions that occur when REST API (process method of Controller) corresponding to the request could not be found, hence, it is not possible to correctly respond to errors such as “405 Method Not Allowed”, etc.

Response example

HTTP/1.1 400 Bad Request
Server: Apache-Coyote/1.1
X-Track: e60b3b6468194e22852c8bfc7618e625
Content-Type: application/json;charset=UTF-8
Transfer-Encoding: chunked
Date: Thu, 13 Mar 2014 12:16:55 GMT
Connection: close

{"code":"e.ex.fw.7001","message":"Validation error occurred on item in the request body.","details":[{"code":"ExistInCodeList","message":"\"genderCode\" must exist in code list of CL_GENDER.","target":"genderCode"}]}

5.1.4.5.2. Implementing input error exception handling ¶

Implementation for responding to input errors (syntax error, unit item check error, correlated field check error) is explained here.

Following three exceptions need to be handled in order to respond to input errors.

Sr. No. Exception Description

(1)

org.springframework.web.bind.

MethodArgumentNotValidException

This exception occurs when there is an error during the input validation for JSON or XML specified in request BODY.

Basically, it occurs when an invalid value is entered in the resource that is specified when POST or PUT method is performed for the resource.

(2)

org.springframework.validation.

BindException

This exception occurs when there is an error during the input validation for request parameter (key=query string of value format).

Basically, it occurs when an invalid value is entered in the search conditions specified at the time of GET method of resource collection.

(3)

org.springframework.http.converter.

HttpMessageNotReadableException

This exception occurs when there is an error while generating Resource object from JSON or XML.

Basically, it occurs in cases such as invalid JSON or XML syntax or violation of schema definition.

Note

org.springframework.beans.TypeMismatchException occurs when there is a type conversion error for value while fetching values from request parameter, request header and path variable, by using annotation provided by Spring Framework.

When following annotations are specified as arguments of Controller handler method (argument other than String), TypeMismatchException may occur.

@org.springframework.web.bind.annotation.RequestParam

@org.springframework.web.bind.annotation.RequestHeader

@org.springframework.web.bind.annotation.Pathvariable

@org.springframework.web.bind.annotation.MatrixVariable

TypeMismatchException is handled by ResponseEntityExceptionHandler resulting in 400 (Bad Request). As a result, individual handling is not required.

Refer to “Resolving error codes and messages using ExceptionCodeResolver” in order to resolve the error codes and error messages to be set in error information.

Method is created to generate error information for input validation errors.

@Component
public class ApiErrorCreator {

    @Inject
    MessageSource messageSource;

    // omitted

    // (1)
    public ApiError createBindingResultApiError(WebRequest request,
            String errorCode, BindingResult bindingResult,
            String defaultErrorMessage) {
        ApiError apiError = createApiError(request, errorCode,
                defaultErrorMessage);
        for (FieldError fieldError : bindingResult.getFieldErrors()) {
            apiError.addDetail(createApiError(request, fieldError, fieldError
                    .getField()));
        }
        for (ObjectError objectError : bindingResult.getGlobalErrors()) {
            apiError.addDetail(createApiError(request, objectError, objectError
                    .getObjectName()));
        }
        return apiError;
    }

    // (2)
    private ApiError createApiError(WebRequest request,
            DefaultMessageSourceResolvable messageResolvable, String target) {
        String localizedMessage = messageSource.getMessage(messageResolvable,
                request.getLocale());
        return new ApiError(messageResolvable.getCode(), localizedMessage, target);
    }

    // omitted

}

Sr. No.	Description
(1)	A method is created to generate error information for input validation. In the above example, single field check error (`FieldError`) and correlated field check error (`ObjectError`) are added to detailed error information. This method need not be provided when it is not necessary to output error information for each item.
(2)	A common method is created since same process is implemented for single field check error (`FieldError`) and correlation check error (`ObjectError`).

ResponseEntityExceptionHandler method is extended and the implementation to output input validation error information in response Body, is performed.

@ControllerAdvice
public class ApiGlobalExceptionHandler extends ResponseEntityExceptionHandler {

    @Inject
    ApiErrorCreator apiErrorCreator;

    @Inject
    ExceptionCodeResolver exceptionCodeResolver;

    // omitted

    // (3)
    @Override
    protected ResponseEntity<Object> handleMethodArgumentNotValid(
            MethodArgumentNotValidException ex, HttpHeaders headers,
            HttpStatus status, WebRequest request) {
        return handleBindingResult(ex, ex.getBindingResult(), headers, status,
                request);
    }

    // (4)
    @Override
    protected ResponseEntity<Object> handleBindException(BindException ex,
            HttpHeaders headers, HttpStatus status, WebRequest request) {
        return handleBindingResult(ex, ex.getBindingResult(), headers, status,
                request);
    }

    // (5)
    @Override
    protected ResponseEntity<Object> handleHttpMessageNotReadable(
            HttpMessageNotReadableException ex, HttpHeaders headers,
            HttpStatus status, WebRequest request) {
        if (ex.getCause() instanceof Exception) {
            return handleExceptionInternal((Exception) ex.getCause(), null,
                    headers, status, request);
        } else {
            return handleExceptionInternal(ex, null, headers, status, request);
        }
    }

    // omitted

    // (6)
    protected ResponseEntity<Object> handleBindingResult(Exception ex,
            BindingResult bindingResult, HttpHeaders headers,
            HttpStatus status, WebRequest request) {
        String code = exceptionCodeResolver.resolveExceptionCode(ex);
        String errorCode = exceptionCodeResolver.resolveExceptionCode(ex);
        ApiError apiError = apiErrorCreator.createBindingResultApiError(
                request, errorCode, bindingResult, ex.getMessage());
        return handleExceptionInternal(ex, apiError, headers, status, request);
    }

    // omitted

}
Sr. No. Description

(3)

Override handleMethodArgumentNotValid method of ResponseEntityExceptionHandler and extend error handling for MethodArgumentNotValidException.

In the above example, the process is delegated to a common method (6) that handles input validation errors.

When it is not necessary to output error information for each item, overriding is not required.

400 (Bad Request) is set in the status code and presence of some flaw in the field value of the specified resource is notified.

(4)

Override handleBindException method of ResponseEntityExceptionHandler and extend error handling for BindException.

In the above example, the process is delegated to a common method (6) that handles input validation error.

When it is not necessary to output error information for each item, overriding is not required.

400 (Bad Request) is set in the status code and presence of flaw in the specified request parameter is notified.

(5)

Override handleHttpMessageNotReadable method of ResponseEntityExceptionHandler and extend error handling for HttpMessageNotReadableException.

In the above example, detailed error handling is performed by using cause exception.

If a detailed error handling is not necessary, overriding is not required.

400 (Bad Request) is set in the status code and presence of flaw in the specified resource format etc. is notified

(6)

Generate a JavaBean object that retains error information for input validation error.

In the above example, this method is created as a common method since same process is implemented in handleMethodArgumentNotValid and handleBindException.

Tip

Error handling when using JSON

When JSON is used as the resource format, following exception is stored as cause exception of HttpMessageNotReadableException.

Sr. No. Exception class Description

(1)

com.fasterxml.jackson.core.

JsonParseException

It occurs when an invalid syntax is included for JSON.

(2)

com.fasterxml.jackson.databind.exc.

UnrecognizedPropertyException

It occurs when a field which does not exist in Resource object is specified in JSON.

(3)

com.fasterxml.jackson.databind.

JsonMappingException

It occurs when a value type conversion error occurs while converting from JSON to Resource object.

Following error response is sent when an input validation error (single field check error, correlated field check error) occurs.

HTTP/1.1 400 Bad Request
Server: Apache-Coyote/1.1
X-Track: 13522b3badf2432ba4cad0dc7aeaee80
Content-Type: application/json;charset=UTF-8
Transfer-Encoding: chunked
Date: Wed, 19 Feb 2014 05:08:28 GMT
Connection: close

{"code":"e.ex.fw.7002","message":"Validation error occurred on item in the request parameters.","details":[{"code":"NotEmpty","message":"\"{0}\" may not be empty.","target":"name"}]}

Following error response is sent when JSON errors (format error etc.) occur.

HTTP/1.1 400 Bad Request
Server: Apache-Coyote/1.1
X-Track: ca4c742a6bfd49e5bc01cd0b124738a1
Content-Type: application/json;charset=UTF-8
Transfer-Encoding: chunked
Date: Wed, 19 Feb 2014 13:32:24 GMT
Connection: close

{"code":"e.ex.fw.7003","message":"Request body format error occurred."}

5.1.4.5.3. Implementing exception handling for “Resource not found” error ¶

When a resource does not exist, implementation for responding to the “resource not found” error, is explained below.

When a resource matching with the ID fetched from path variable is not found, generate an exception notifying “resource not found” .
org.terasoluna.gfw.common.exception.ResourceNotFoundException is provided by common library as an exception notifying “resource not found”.
Implementation is as given below.

When a resource matching with the ID fetched from path variable is not found, generate ResourceNotFoundException.

public Member getMember(String memberId) {
    Member member = memberRepository.findOne(memberId);
    if (member == null) {
        throw new ResourceNotFoundException(ResultMessages.error().add(
                "e.ex.mm.5001", memberId));
    }
    return member;
}

Create a method to generate error information for ResultMessages.

@Component
public class ApiErrorCreator {

    // omitted

    // (1)
    public ApiError createResultMessagesApiError(WebRequest request,
            String rootErrorCode, ResultMessages resultMessages,
            String defaultErrorMessage) {
        ApiError apiError;
        if (resultMessages.getList().size() == 1) {
            ResultMessage resultMessage = resultMessages.iterator().next();
            String errorCode = resultMessage.getCode();
            String errorText = resultMessage.getText();
            if (errorCode == null && errorText == null) {
                errorCode = rootErrorCode;
            }
            apiError = createApiError(request, errorCode, errorText,
                    resultMessage.getArgs());
        } else {
            apiError = createApiError(request, rootErrorCode,
                    defaultErrorMessage);
            for (ResultMessage resultMessage : resultMessages.getList()) {
                apiError.addDetail(createApiError(request, resultMessage
                        .getCode(), resultMessage.getText(), resultMessage
                        .getArgs()));
            }
        }
        return apiError;
    }

    // omitted

}

Sr. No.	Description
(1)	Create a method for generating error information from process results. In the above example, the message information retained by `ResultMessages` is set in error information.

Note

In the above example, as ResultMessages can retain multiple messages, the process is divided as per when a single message is stored and when multiple messages are stored.

When it is not necessary to support multiple messages, the process wherein the message at the start is generated as error information, may be implemented.

Create a method for handling the exception that notifies “resource not found” error, in the class that performs error handling.

@ControllerAdvice
public class ApiGlobalExceptionHandler extends ResponseEntityExceptionHandler {

    @Inject
    ApiErrorCreator apiErrorCreator;

    @Inject
    ExceptionCodeResolver exceptionCodeResolver;

    // omitted

    // (2)
    @ExceptionHandler(ResourceNotFoundException.class)
    public ResponseEntity<Object> handleResourceNotFoundException(
            ResourceNotFoundException ex, WebRequest request) {
        return handleResultMessagesNotificationException(ex, new HttpHeaders(),
                HttpStatus.NOT_FOUND, request);
    }

    // omitted

    // (3)
    private ResponseEntity<Object> handleResultMessagesNotificationException(
            ResultMessagesNotificationException ex, HttpHeaders headers,
            HttpStatus status, WebRequest request) {
        String errorCode = exceptionCodeResolver.resolveExceptionCode(ex);
        ApiError apiError = apiErrorCreator.createResultMessagesApiError(
                request, errorCode, ex.getResultMessages(), ex.getMessage());
        return handleExceptionInternal(ex, apiError, headers, status, request);
    }

    // omitted

}
Sr. No. Description

(2)

Add a method for handling ResourceNotFoundException.

ResourceNotFoundException exception can be handled if @ExceptionHandler(ResourceNotFoundException.class) is specified as method annotation.

In the above example, the process is delegated to method that handles exception of the parent class (ResultMessagesNotificationException) of ResourceNotFoundException.

Set 404 (Not Found) in the status code and notify a message stating, ‘specified resource does not exist in the server’.

(3)

Generate a JavaBean object that retains error information for “resource not found” error and business error.

In the above example, this method is created as a common method since the process is same as that for error handling of business error discussed hereafter.

When resource is not found, following error response is generated.

HTTP/1.1 404 Not Found
Server: Apache-Coyote/1.1
X-Track: 5ee563877f3140fd904d0acf52eba398
Content-Type: application/json;charset=UTF-8
Transfer-Encoding: chunked
Date: Wed, 19 Feb 2014 08:46:18 GMT

{"code":"e.ex.mm.5001","message":"Specified member not found. member id : M000000001"}

5.1.4.5.4. Implementing exception handling for business errors ¶

An implementation wherein business error is sent as a response on detecting violation of business rule, is explained here.

Perform business rule check as Service process and generate business exception when a business rule violation is detected. For details on how to detect business error, refer to “Notifying business error”.

Create a method to handle business exception in the class that performs error handling.

@ControllerAdvice
public class ApiGlobalExceptionHandler extends ResponseEntityExceptionHandler {

    // omitted

    // (1)
    @ExceptionHandler(BusinessException.class)
    public ResponseEntity<Object> handleBusinessException(BusinessException ex,
            WebRequest request) {
        return handleResultMessagesNotificationException(ex, new HttpHeaders(),
                HttpStatus.CONFLICT, request);
    }

    // omitted

}
Sr. No. Description

(1)

Add a method for handling BusinessException.

BusinessException can be handled if @ExceptionHandler(BusinessException.class) is specified as method annotation.

In the above example, the process is delegated to the method that handles the exception of parent class (ResultMessagesNotificationException) of BusinessException.

Set 409 (Conflict)in the status code and send a message notifying although there are no errors in the resource itself specified by client, all the conditions necessary for operating the resource stored by the server are not in place.

Following error response is generated when a business error occurs.

HTTP/1.1 409 Conflict
Server: Apache-Coyote/1.1
X-Track: 37c1a899d5f74e7a9c24662292837ef7
Content-Type: application/json;charset=UTF-8
Transfer-Encoding: chunked
Date: Wed, 19 Feb 2014 09:03:26 GMT

{"code":"e.ex.mm.8001","message":"Cannot use specified sign id. sign id : user1@test.com"}

5.1.4.5.5. Implementing exception handling for exclusive errors ¶

An implementation is explained here wherein, an exclusive error is generated and sent as a response.
Exclusive error handling is necessary when performing exclusive control.
For details of exclusive control, refer to “Exclusive Control” .

Create a method for exclusive error handling in the class that performs error handling.

@ControllerAdvice
public class ApiGlobalExceptionHandler extends ResponseEntityExceptionHandler {

    // omitted

    // (1)
    @ExceptionHandler({ OptimisticLockingFailureException.class,
            PessimisticLockingFailureException.class })
    public ResponseEntity<Object> handleLockingFailureException(Exception ex,
            WebRequest request) {
        return handleExceptionInternal(ex, null, new HttpHeaders(),
                HttpStatus.CONFLICT, request);
    }

    // omitted

}
Sr. No. Description

(1)

Add a method for handling exclusive errors (OptimisticLockingFailureException and PessimisticLockingFailureException).

If @ExceptionHandler({ OptimisticLockingFailureException.class, PessimisticLockingFailureException.class }) is specified as method annotation, exception handling of exclusive errors (OptimisticLockingFailureException and PessimisticLockingFailureException) can be performed.

Set 409(Conflict) in status code and send a message notifying that, ‘although there are no flaws in the resource itself specified by client, the conditions for operating the resource could not be fulfilled due to conflict in the process’.

When an exclusive error occurs, following error response is generated.

HTTP/1.1 409 Conflict
Server: Apache-Coyote/1.1
X-Track: 85200b5a51be42b29840e482ee35087f
Content-Type: application/json;charset=UTF-8
Transfer-Encoding: chunked
Date: Wed, 19 Feb 2014 16:32:45 GMT

{"code":"e.ex.fw.8002","message":"Conflict with other processing occurred."}

5.1.4.5.6. Implementing exception handling for system errors ¶

An implementation wherein system error is sent as a response on detecting system abnormality, is explained here.

Generate system exception when any system abnormality is detected. Refer to “Notifying system error” for the details on how to detect system errors.

Create a method to handle system exceptions in the class that performs error handling.

@ControllerAdvice
public class ApiGlobalExceptionHandler extends ResponseEntityExceptionHandler {

    // omitted

    // (1)
    @ExceptionHandler(Exception.class)
    public ResponseEntity<Object> handleSystemError(Exception ex,
            WebRequest request) {
        return handleExceptionInternal(ex, null, new HttpHeaders(),
                HttpStatus.INTERNAL_SERVER_ERROR, request);
    }

    // omitted

}
Sr. No. Description

(1)

Add a method for handling Exception.

Exception can be handled if @ExceptionHandler(Exception.class) is specified as method annotation.

In the above example, the system exceptions generated from dependent libraries being used, are also handled.

Set 500 (Internal Server Error) in status code.

Following error response is generated when a system error occurs.

HTTP/1.1 500 Internal Server Error
Server: Apache-Coyote/1.1
X-Track: 3625d5a040a744e49b0a9b3763a24e9c
Content-Type: application/json;charset=UTF-8
Transfer-Encoding: chunked
Date: Wed, 19 Feb 2014 12:22:33 GMT
Connection: close

{"code":"e.ex.fw.9003","message":"System error occurred."}
Warning

Error message at the time of system error

When system error occurs, it is recommended that a simple error message that does not specify the error cause, is set as the message to be returned to the client. If an error message specifying the cause of error is set, it may expose system vulnerabilities to the client resulting in security issues.

Cause of error is output to a log, for error analysis. This log is output by ExceptionLogger provided by common library as the default setting of Blank project. As a result, the settings and implementation for log output are not required.

5.1.4.5.7. Resolving error codes and messages using ExceptionCodeResolver ¶

If ExceptionCodeResolver provided by common library is used, error codes can be resolved from the exception class.

Especially, this functionality proves to be convenient, when the cause of error lies at client side and when it is necessary to set the error message corresponding to error cause.

applicationContext.xml

Mapping exception class and error code (exception code).

<!-- omitted -->

<bean id="exceptionCodeResolver"
    class="org.terasoluna.gfw.common.exception.SimpleMappingExceptionCodeResolver">
    <property name="exceptionMappings">
        <map>
            <!-- omitted -->
            <entry key="ResourceNotFoundException"              value="e.ex.fw.5001" />
            <entry key="HttpRequestMethodNotSupportedException" value="e.ex.fw.6001" />
            <entry key="MediaTypeNotAcceptableException"        value="e.ex.fw.6002" />
            <entry key="HttpMediaTypeNotSupportedException"     value="e.ex.fw.6003" />
            <entry key="MethodArgumentNotValidException"        value="e.ex.fw.7001" />
            <entry key="BindException"                          value="e.ex.fw.7002" />
            <entry key="JsonParseException"                     value="e.ex.fw.7003" />
            <entry key="UnrecognizedPropertyException"          value="e.ex.fw.7004" />
            <entry key="JsonMappingException"                   value="e.ex.fw.7005" />
            <entry key="TypeMismatchException"                  value="e.ex.fw.7006" />
            <entry key="BusinessException"                      value="e.ex.fw.8001" />
            <entry key="OptimisticLockingFailureException"      value="e.ex.fw.8002" />
            <entry key="PessimisticLockingFailureException"     value="e.ex.fw.8002" />
            <entry key="DataAccessException"                    value="e.ex.fw.9002" />
            <!-- omitted -->
        </map>
    </property>
    <property name="defaultExceptionCode" value="e.ex.fw.9001" />
</bean>

<!-- omitted -->

Configuration example of message corresponding to error code is shown below.

For message management, refer to “Message Management” .

xxx-web/src/main/resources/i18n/application-messages.properties

Message corresponding to error code (exception code) is set for the error that occurs in application layer.

# ---
# Application common messages
# ---
e.ex.fw.5001 = Resource not found.

e.ex.fw.6001 = Request method not supported.
e.ex.fw.6002 = Specified representation format not supported.
e.ex.fw.6003 = Specified media type in the request body not supported.

e.ex.fw.7001 = Validation error occurred on item in the request body.
e.ex.fw.7002 = Validation error occurred on item in the request parameters.
e.ex.fw.7003 = Request body format error occurred.
e.ex.fw.7004 = Unknown field exists in JSON.
e.ex.fw.7005 = Type mismatch error occurred in JSON field.
e.ex.fw.7006 = Type mismatch error occurred in request parameter or header or path variable.

e.ex.fw.8001 = Business error occurred.
e.ex.fw.8002 = Conflict with other processing occurred.

e.ex.fw.9001 = System error occurred.
e.ex.fw.9002 = System error occurred.
e.ex.fw.9003 = System error occurred.

# omitted

xxx-web/src/main/resources/ValidationMessages.properties

Set a message corresponding to error code for the error that occurs in the input validation performed using Bean Validation.

# ---
# Bean Validation common messages
# ---

# for bean validation of standard
javax.validation.constraints.AssertFalse.message = "{0}" must be false.
javax.validation.constraints.AssertTrue.message  = "{0}" must be true.
javax.validation.constraints.DecimalMax.message  = "{0}" must be less than ${inclusive == true ? 'or equal to ' : ''}{value}.
javax.validation.constraints.DecimalMin.message  = "{0}" must be greater than ${inclusive == true ? 'or equal to ' : ''}{value}.
javax.validation.constraints.Digits.message      = "{0}" numeric value out of bounds (<{integer} digits>.<{fraction} digits> expected).
javax.validation.constraints.Future.message      = "{0}" must be in the future.
javax.validation.constraints.Max.message         = "{0}" must be less than or equal to {value}.
javax.validation.constraints.Min.message         = "{0}" must be greater than or equal to {value}.
javax.validation.constraints.NotNull.message     = "{0}" may not be null.
javax.validation.constraints.Null.message        = "{0}" must be null.
javax.validation.constraints.Past.message        = "{0}" must be in the past.
javax.validation.constraints.Pattern.message     = "{0}" must match "{regexp}".
javax.validation.constraints.Size.message        = "{0}" size must be between {min} and {max}.

# for bean validation of hibernate
org.hibernate.validator.constraints.CreditCardNumber.message        = "{0}" invalid credit card number.
org.hibernate.validator.constraints.EAN.message                     = "{0}" invalid {type} barcode.
org.hibernate.validator.constraints.Email.message                   = "{0}" not a well-formed email address.
org.hibernate.validator.constraints.Length.message                  = "{0}" length must be between {min} and {max}.
org.hibernate.validator.constraints.LuhnCheck.message               = "{0}" The check digit for ${validatedValue} is invalid, Luhn Modulo 10 checksum failed.
org.hibernate.validator.constraints.Mod10Check.message              = "{0}" The check digit for ${validatedValue} is invalid, Modulo 10 checksum failed.
org.hibernate.validator.constraints.Mod11Check.message              = "{0}" The check digit for ${validatedValue} is invalid, Modulo 11 checksum failed.
org.hibernate.validator.constraints.ModCheck.message                = "{0}" The check digit for ${validatedValue} is invalid, ${modType} checksum failed.
org.hibernate.validator.constraints.NotBlank.message                = "{0}" may not be empty.
org.hibernate.validator.constraints.NotEmpty.message                = "{0}" may not be empty.
org.hibernate.validator.constraints.ParametersScriptAssert.message  = "{0}" script expression "{script}" didn't evaluate to true.
org.hibernate.validator.constraints.Range.message                   = "{0}" must be between {min} and {max}.
org.hibernate.validator.constraints.SafeHtml.message                = "{0}" may have unsafe html content.
org.hibernate.validator.constraints.ScriptAssert.message            = "{0}" script expression "{script}" didn't evaluate to true.
org.hibernate.validator.constraints.URL.message                     = "{0}" must be a valid URL.

org.hibernate.validator.constraints.br.CNPJ.message                 = "{0}" invalid Brazilian corporate taxpayer registry number (CNPJ).
org.hibernate.validator.constraints.br.CPF.message                  = "{0}" invalid Brazilian individual taxpayer registry number (CPF).
org.hibernate.validator.constraints.br.TituloEleitoral.message      = "{0}" invalid Brazilian Voter ID card number.

# for common library
org.terasoluna.gfw.common.codelist.ExistInCodeList.message   = "{0}" must exist in code list of {codeListId}.

xxx-domain/src/main/resources/i18n/domain-messages.properties

Set a message corresponding to error code (exception code) for the error in domain layer.

# omitted

e.ex.mm.5001 = Specified member not found. member id : {0}
e.ex.mm.8001 = Cannot use specified sign id. sign id : {0}
# omitted

5.1.4.6. Implementing the error handling notified to Servlet Container ¶

When an error occurs in Filter or when error responses are sent by using HttpServletResponse#sendError, the errors cannot be handled using exception handling feature of Spring MVC. Hence, these errors are notified to Servlet Container.

This section explains how to handle the errors notified to Servlet Container.

Sr. No. Processing layer Description

(1)

Servlet Container

(AP Server)

Servlet Container receives a request from the client and performs process.

Servlet Container detects an error during the process.

(2)

Servlet Container performs error handling according to the error page definition in web.xml.

If the error is not fatal, Controller for error handling is called and the error is handled.

(2’)

In case of a fatal error, a static JSON file provided in advance is fetched and a response is sent to the client.

(3)

Spring MVC

(Framework)

Spring MVC calls the Controller that performs error handling.

(4)

Controller

(Common Component)

An error object that retains error information is generated in the Controller and is returned to Spring MVC.

(5)

Spring MVC

(Framework)

Spring MVC converts the error object to JSON format message by using HttpMessageConverter.

(6)

Spring MVC sets the JSON format error message in response BODY and sends a response to client.

5.1.4.6.1. Implementing the Controller that sends error response ¶

Create a controller that sends the error response for the error notified to Servlet Container.

package org.terasoluna.examples.rest.api.common.error;

import java.util.HashMap;
import java.util.Map;

import javax.inject.Inject;
import javax.servlet.RequestDispatcher;

import org.springframework.http.HttpStatus;
import org.springframework.http.MediaType;
import org.springframework.http.ResponseEntity;
import org.springframework.web.bind.annotation.RequestMapping;
import org.springframework.web.bind.annotation.RestController;
import org.springframework.web.context.request.RequestAttributes;
import org.springframework.web.context.request.WebRequest;

// (1)
@RequestMapping("error")
@RestController
public class ApiErrorPageController {

    @Inject
    ApiErrorCreator apiErrorCreator; // (2)

    // (3)
    private final Map<HttpStatus, String> errorCodeMap = new HashMap<HttpStatus, String>();

    // (4)
    public ApiErrorPageController() {
        errorCodeMap.put(HttpStatus.NOT_FOUND, "e.ex.fw.5001");
    }

    // (5)
    @RequestMapping
    public ResponseEntity<ApiError> handleErrorPage(WebRequest request) {
        // (6)
        HttpStatus httpStatus = HttpStatus.valueOf((Integer) request
                .getAttribute(RequestDispatcher.ERROR_STATUS_CODE,
                        RequestAttributes.SCOPE_REQUEST));
        // (7)
        String errorCode = errorCodeMap.get(httpStatus);
        // (8)
        ApiError apiError = apiErrorCreator.createApiError(request, errorCode,
                httpStatus.getReasonPhrase());
        // (9)
        return ResponseEntity.status(httpStatus).body(apiError);
    }

}

Sr. No.	Description
(1)	Create a Controller class for sending error response. In the above example, it is mapped to Servlet path “`/api/v1/error`”.
(2)	Inject a class that creates error information.
(3)	Create `Map` for mapping HTTP status code and error code.
(4)	Register mapping of HTTP status code and error code.
(5)	Create a handler method that sends error response. Above example is implemented on considering only the case wherein, error page is handled by using a response code (`<error-code>`). Therefore, separate consideration is required for the case where an error page that is handled by using exception type (`<exception-type>`) is to be processed using this method.
(6)	Fetch status code stored in request scope.
(7)	Fetch error code corresponding to status code thus fetched.
(8)	Generate error information corresponding to error codes thus fetched.
(9)	Return the error information generated in (8).

5.1.4.6.2. Creating a static JSON file to be sent as response when a fatal error occurs ¶

Create a static JSON file to be sent as a response when a fatal error occurs.

unhandledSystemError.json

{"code":"e.ex.fw.9999","message":"Unhandled system error occurred."}

5.1.4.6.3. Settings for handling an error that is notified to Servlet Container ¶

Settings for handling an error that is notified to Servlet Container are explained here.

web.xml

<error-page>
    <error-code>404</error-code>
    <location>/api/v1/error</location>
</error-page>


<error-page>
    <exception-type>java.lang.Exception</exception-type>
    <location>/WEB-INF/views/common/error/unhandledSystemError.json</location>
</error-page>


<mime-mapping>
    <extension>json</extension>
    <mime-type>application/json;charset=UTF-8</mime-type>
</mime-mapping>


Sr. No. Description

(1)

Add error page definition for response code if required.

In the above example, when error "404 Not Found" occurs, Controller (`` ApiErrorPageController``) that is mapped in request “/api/v1/error” is called and error response is sent.

(2)

Add definition for handling a fatal error.

When a fatal error occurs, it is recommended to respond with the static JSON provided in advance, as double failure may occur during the process that creates response information.

In the above example, fixed JSON defined in “/WEB-INF/views/common/error/unhandledSystemError.json” is sent as response.

(3)

Specify MIME type of json.

When multi byte characters are included in the JSON file created in (2), junk characters may be displayed at client side if charset=UTF-8 is not specified.

When there are no multi byte characters in the JSON file, this setting is not mandatory. However, it is always safe to incorporate this setting.

Note

In Servlet specification,, the behaviour wherein a path is specified which assigns query parameters in <location> of <error-page> is not defined. Hence, behaviour is likely to change according to AP server. Accordingly, it is not recommended to transfer information to transition destination at the time of error using a query parameter.

When the request is sent to a non-existing path, following error response is sent.

HTTP/1.1 404 Not Found
Server: Apache-Coyote/1.1
X-Track: 2ad50fb5ba2441699c91a5b01edef83f
Content-Type: application/json;charset=UTF-8
Transfer-Encoding: chunked
Date: Wed, 19 Feb 2014 23:24:20 GMT

{"code":"e.ex.fw.5001","message":"Resource not found."}

When a fatal error occurs, following error response is sent.

HTTP/1.1 500 Internal Server Error
Server: Apache-Coyote/1.1
X-Track: 69db3854a19f439781584321d9ce8336
Content-Type: application/json
Content-Length: 68
Date: Thu, 20 Feb 2014 00:13:43 GMT
Connection: close

{"code":"e.ex.fw.9999","message":"Unhandled system error occurred."}

5.1.4.7. Security measures ¶

Implementing security measures for RESTful Web Service is explained here.

This guideline recommends using Spring Security for implementation of security measures.

5.1.4.7.1. Authentication and Authorization ¶

Please refer to : ref: OAuth <OAuth> for how to achieve authentication and authorization using OAuth 2 (Spring Security OAuth 2).

5.1.4.7.2. CSRF measures ¶

Refer to CSRF Measures for the setting methods when CSRF measures are carried out for RESTful Web Service.
Refer to Disabling CSRF measures for the setting methods when CSRF measures are not carried out for RESTful Web Service.

5.1.4.8. Conditional operations for resource ¶

Todo

TBD

How to implement conditional process control using headers like Etag etc. will be explained in subsequent versions.

5.1.4.9. Cache control for resource ¶

Todo

TBD

How to implement cache control using headers like Cache-Control/Expires/Pragma etc. will be explained in subsequent versions.

5.1.5. How to extend ¶

5.1.5.1. Output control for response using @JsonView ¶

Properties within the resource object can be grouped by using @JsonView.
Spring Framework implements this function by supporting Jackson function.
For details, refer JacksonJsonViews.

The properties those belong to the specified group alone can be output by specifying the group in Controller.
1 property may also belong to multiple groups.

Example of implementation when Member resource is handled in 2 formats of ‘Overview’ and ‘Details’ is as follows.
‘Overview format’ outputs the main item of Member resource and ‘Details format’ outputs all items of Member resource.

MemberResource.java

package org.terasoluna.examples.rest.api.member;

import java.io.Serializable;

import org.joda.time.DateTime;
import org.joda.time.LocalDate;

import com.fasterxml.jackson.annotation.JsonView;

public class MemberResource implements Serializable {

    private static final long serialVersionUID = 1L;

    // (1)
    interface Summary {
    }

    // (2)
    interface Detail {
    }

    // (3)
    @JsonView({Summary.class, Detail.class})
    private String memberId;

    @JsonView({Summary.class, Detail.class})
    private String firstName;

    @JsonView({Summary.class, Detail.class})
    private String lastName;

    // (4)
    @JsonView(Detail.class)
    private String genderCode;

    @JsonView(Detail.class)
    private LocalDate dateOfBirth;

    @JsonView(Detail.class)
    private String emailAddress;

    @JsonView(Detail.class)
    private String telephoneNumber;

    @JsonView(Detail.class)
    private String zipCode;

    @JsonView(Detail.class)
    private String address;

    // (5)
    private DateTime createdAt;

    private DateTime lastModifiedAt;

    // omitted setter and getter

}
Sr. No. Description

(1)

A marker interface to specify the group which controls the output is defined.

A group to be specified at the time of overview output is defined in the above example.

(2)

A marker interface to specify the group which controls the output is defined.

A group to be specified at the time of details output is defined in the above example.

(3)

The items to be output in multiple groups can be assigned to multiple groups by setting arguments to an array and passing multiple marker interfaces.

Since the items in the above example are to be assigned to both the groups, overview and details, 2 marker interfaces are set as arguments.

(4)

The items to be output in single group can be assigned to the corresponding group

by setting the marker interface to argument.

Since there is 1 element in this case, it is not necessary to set it in the array.

Since the items in the above example are to be assigned only to the details group, 1 marker interface is set to an argument.

(5)

@JsonView is not set in the items those do not belong to the group.

It can be changed whether the items those do not belong to the group are to be output, according to the settings.

Method of setting is described later.

MemberRestController.java

package org.terasoluna.examples.rest.api.member;

import java.util.ArrayList;
import java.util.List;

import javax.inject.Inject;

import org.dozer.Mapper;
import org.springframework.http.HttpStatus;
import org.springframework.web.bind.annotation.PathVariable;
import org.springframework.web.bind.annotation.RequestBody;
import org.springframework.web.bind.annotation.RequestMapping;
import org.springframework.web.bind.annotation.RequestMethod;
import org.springframework.web.bind.annotation.ResponseStatus;
import org.springframework.web.bind.annotation.RestController;
import org.terasoluna.examples.rest.domain.model.Member;
import org.terasoluna.examples.rest.domain.service.member.MemberService;

import com.fasterxml.jackson.annotation.JsonView;

@RequestMapping("members")
@RestController
public class MemberRestController {

    @Inject
    MemberService memberService;

    @Inject
    Mapper beanMapper;

    // (1)
    @JsonView(Summary.class)
    @RequestMapping(value = "{memberId}", params = "format=summary", method = RequestMethod.GET)
    @ResponseStatus(HttpStatus.OK)
    public MemberResource getMemberSummary(@PathVariable("memberId") String memberId) {

        Member member = memberService.getMember(memberId);

        MemberResource responseResource = beanMapper.map(member,
                MemberResource.class);

        return responseResource;
    }

    // (2)
    @JsonView(Detail.class)
    @RequestMapping(value = "{memberId}", params = "format=detail", method = RequestMethod.GET)
    @ResponseStatus(HttpStatus.OK)
    public MemberResource getMemberDetail(@PathVariable("memberId") String memberId) {

        Member member = memberService.getMember(memberId);

        MemberResource responseResource = beanMapper.map(member,
                MemberResource.class);

        return responseResource;
    }
}

Sr. No.	Description
(1)	Attach `@JsonView` and set the marker interface for the group to be output. Set `Summary` marker interface in the method that outputs the overview.
(2)	Set `Detail` marker interface in the method that outputs the details.

Properties those belong to the group specified in Controller alone are displayed in the body that is output.

The output example is as follows.

Summary

{
  "memberId" : "M000000001",
  "firstName" : "John",
  "lastName" : "Smith",
  "createdAt" : "2014-03-14T11:02:41.477Z",
  "lastModifiedAt" : "2014-03-14T11:02:41.477Z"
}

Detail

{
  "memberId" : "M000000001",
  "firstName" : "John",
  "lastName" : "Smith",
  "genderCode" : "1",
  "dateOfBirth" : "2013-03-14",
  "emailAddress" : "user1394794959984@test.com",
  "telephoneNumber" : "09012345678",
  "zipCode" : "1710051",
  "address" : "Tokyo",
  "createdAt" : "2014-03-14T11:02:41.477Z",
  "lastModifiedAt" : "2014-03-14T11:02:41.477Z"
}

Properties without @JsonView attached are output if MapperFeature.DEFAULT_VIEW_INCLUSION setting is enabled and are not output if disabled.
MapperFeature.DEFAULT_VIEW_INCLUSION is enabled in the above output example.
Set as follows when MapperFeature.DEFAULT_VIEW_INCLUSION is enabled.

<bean id="objectMapper" class="org.springframework.http.converter.json.Jackson2ObjectMapperFactoryBean">
    <!-- ... -->

    <!-- (1) -->
    <property name="featuresToEnable">
        <array>
            <util:constant static-field="com.fasterxml.jackson.databind.MapperFeature.DEFAULT_VIEW_INCLUSION"/>
        </array>
    </property>
</bean>

Sr. No.	Description
(1)	Setting is enabled by defining `MapperFeature.DEFAULT_VIEW_INCLUSION` in `featuresToEnable` element.

Set as follows when MapperFeature.DEFAULT_VIEW_INCLUSION is to be disabled.

<bean id="objectMapper" class="org.springframework.http.converter.json.Jackson2ObjectMapperFactoryBean">
    <!-- ... -->

    <!-- (1) -->
    <property name="featuresToDisable">
        <array>
            <util:constant static-field="com.fasterxml.jackson.databind.MapperFeature.DEFAULT_VIEW_INCLUSION"/>
        </array>
    </property>
</bean>

Sr. No.	Description
(1)	Setting is disabled by defining `MapperFeature.DEFAULT_VIEW_INCLUSION` in `featuresToDisable` element.

When MapperFeature.DEFAULT_VIEW_INCLUSION is disabled, contents of output in the earlier output example are changed as follows.

Summary

{
  "memberId" : "M000000001",
  "firstName" : "John",
  "lastName" : "Smith"
}

Detail

{
  "memberId" : "M000000001",
  "firstName" : "John",
  "lastName" : "Smith",
  "genderCode" : "1",
  "dateOfBirth" : "2013-03-14",
  "emailAddress" : "user1394794959984@test.com",
  "telephoneNumber" : "09012345678",
  "zipCode" : "1710051",
  "address" : "Tokyo"
}

Warning

You need to be careful since the default value when MapperFeature.DEFAULT_VIEW_INCLUSION is not specified, varies according to the setting method for ObjectMapper. It is also mentioned in Settings for activating the Spring MVC components necessary for RESTful Web Service that the default value becomes valid if the direct Bean definition is applied for the method to define Bean for ObjectMapper. If Jackson2ObjectMapperFactoryBean is used, the default value becomes invalid. For explicitly carrying out settings, it is recommended to include MapperFeature.DEFAULT_VIEW_INCLUSION specification for setting with either of the styles.

Note

@JsonView is created using the following 2 functions. These are the functions those can be used when the common processes before and after object mapping are to be implemented in the process methods to which @RequestMapping in the Controller is added.

org.springframework.web.servlet.mvc.method.annotation.RequestBodyAdvice
org.springframework.web.servlet.mvc.method.annotation.ResponseBodyAdvice

@ControllerAdvice can be applied by adding it to the implementation class of these interfaces. Refer Implementing “@ControllerAdvice” for the details of @ControllerAdvice.

RequestBodyAdvice can implement the following method.

org.springframework.web.servlet.mvc.method.annotation.RequestBodyAdvice

Sr. No. Method name Overview

(1)

supports

Determine whether this Advice is applied to the request sent. It is applied if true.

(2)

handleEmptyBody

It is called before the contents of request body are reflected in the object used in Controller and when the body is empty.

(3)

beforeBodyRead

It is called before the contents of request body are reflected in the object used in Controller.

(4)

afterBodyRead

It is called after the contents of request body are reflected in the object used in Controller.

When it is not required to describe the processes with all above timings, they can be easily implemented by inheriting org.springframework.web.servlet.mvc.method.annotation.RequestBodyAdviceAdapter implemented with the above methods except supports not performing any action and overriding only the necessary portion.

ResponseBodyAdvice can implement the following method.

org.springframework.web.servlet.mvc.method.annotation.ResponseBodyAdvice

Sr. No. Method name Overview

(1)

supports

Determine whether this Advice is applied to the request sent. It is applied if true.

(2)

beforeBodyWrite

It is called before reflecting the return value in the response after the process in Controller is completed.

5.1.6. Appendix ¶

5.1.6.1. Configuration while using JSR-310 Date and Time API / Joda Time ¶

When JSR-310 Date and Time API is to be used as a property of JavaBean which represents a resource (Resource class), it is not necessary to add a dependency relation since the dependency relation is defined in terasoluna-gfw-common-dependencies. On the contrary, when Joda Time class is to be used, an extension module provided by Jackson in pom.xml is added to dependent library.

When Joda Time class is used

<dependency>
    <groupId>org.terasoluna.gfw</groupId>
    <artifactId>terasoluna-gfw-jodatime-dependencies</artifactId>
    <type>pom</type>
</dependency>

or

<dependency>
    <groupId>com.fasterxml.jackson.datatype</groupId>
    <artifactId>jackson-datatype-joda</artifactId>
</dependency>

Note

In the above setting example, since it is assumed that the dependent library version is managed by the parent project terasoluna-gfw-parent , specifying the version in pom.xml is not necessary. The above jackson-datatype-joda used by terasoluna-gfw-parent is defined by Spring IO Platform.

Besides above, extension modules (jackson-datatype-xxx) for handling

java.nio.file.Path added from Java SE 7
java.util.Optional added from Java SE 8
Objects that are set as Proxy by using Lazy Load function of Hibernate ORM

are provided by another Jackson.

5.1.6.2. Settings when RESTful Web Service and client application are operated as the same Web application ¶

5.1.6.2.1. How to set `DispatcherServlet` for RESTful Web Service ¶

When RESTful Web Service and client application are built as same Web application, it is recommended to divide as DispatcherServlet that receives the requests for RESTful Web Service and DispatcherServlet that receives client application requests.

How to divide DispatcherServlet is explained below.

web.xml

<servlet>
    <servlet-name>appServlet</servlet-name>
    <servlet-class>org.springframework.web.servlet.DispatcherServlet</servlet-class>
    <init-param>
        <param-name>contextConfigLocation</param-name>
        <param-value>classpath*:META-INF/spring/spring-mvc.xml</param-value>
    </init-param>
    <load-on-startup>1</load-on-startup>
</servlet>
<servlet-mapping>
    <servlet-name>appServlet</servlet-name>
    <url-pattern>/</url-pattern>
</servlet-mapping>


<servlet>
    <servlet-name>restAppServlet</servlet-name>
    <servlet-class>org.springframework.web.servlet.DispatcherServlet</servlet-class>
    <init-param>
        <param-name>contextConfigLocation</param-name>
        
        <param-value>classpath*:META-INF/spring/spring-mvc-rest.xml</param-value>
    </init-param>
    <load-on-startup>2</load-on-startup>
</servlet>

<servlet-mapping>
    <servlet-name>restAppServlet</servlet-name>
    <url-pattern>/api/v1/*</url-pattern>
</servlet-mapping>


Sr. No. Description

(1)

Request mapping with the DispatcherServlet that receives request for client application.

(2)

Add Servlet (DispatcherServlet) that receives the request for RESTful Web Service.

Specify a name indicating it as RESTful Web Service Servlet in <servlet-name> element.

In the above example, "restAppServlet" is specified as the Servlet name.

(3)

Specify Spring MVC bean definition file to be used while building the DispatcherServlet for RESTful Web Service.

In the above example, META-INF/spring/spring-mvc-rest.xml in class path, is specified as the Spring MVC bean definition file.

(4)

Specify the pattern of servlet path mapped to the DispatcherServletfor RESTful Web Service.

In the above example, the Servlet path under "/api/v1/" is mapped in the DispatcherServlet for RESTful Web Service.

Typically, Servlet paths like

"/api/v1/"

"/api/v1/members"

"/api/v1/members/xxxxx"

are mapped in the DispatcherServlet ("restAppServlet") for RESTful Web Service.

Tip

Value to be specified in the value attribute of @RequestMapping annotation

Value in the wild card (*) part specified in <url-pattern> element, is specified as the value in “value” attribute of @RequestMapping annotation.

For example, when @RequestMapping(value = "members") is specified, it is deployed as the method that performs process for path "/api/v1/members". Therefore, it is not necessary to specify the path ("api/v1") that performs mapping in divided Servlets, in the value attribute of @RequestMapping annotation.

When specified as @RequestMapping(value = "api/v1/members"), it ends up being deployed as the method performing the process for path "/api/v1/api/v1/members". Hence, please take note of same.

5.1.6.3. Implementing hypermedia link ¶

Implementation for including a hypermedia link to a related resource in JSON, is explained here.

5.1.6.3.1. Implementing common parts ¶

Create a JavaBean that retains the link information.

package org.terasoluna.examples.rest.api.common.resource;

import java.io.Serializable;

// (1)
public class Link implements Serializable {

    private static final long serialVersionUID = 1L;

    private final String rel;

    private final String href;

    public Link(String rel, String href) {
        this.rel = rel;
        this.href = href;
    }

    public String getRel() {
        return rel;
    }

    public String getHref() {
        return href;
    }

}

Sr. No.	Description
(1)	Create a JavaBean for link information that retains the link name and URL.

Create an abstract class of Resource that retains collection of link information.

package org.terasoluna.examples.rest.api.common.resource;

import java.net.URI;
import java.util.LinkedHashSet;
import java.util.Set;

import com.fasterxml.jackson.annotation.JsonInclude;

// (2)
public abstract class AbstractLinksSupportedResource {

    // (3)
    @JsonInclude(JsonInclude.Include.NON_EMPTY)
    private final Set<Link> links = new LinkedHashSet<>();

    public Set<Link> getLinks() {
        return links;
    }

    // (4)
    public AbstractLinksSupportedResource addLink(String rel, URI href) {
        links.add(new Link(rel, href.toString()));
        return this;
    }

    // (5)
    public AbstractLinksSupportedResource addSelf(URI href) {
        return addLink("self", href);
    }

    // (5)
    public AbstractLinksSupportedResource addParent(URI href) {
        return addLink("parent", href);
    }

}
Sr. No. Description

(2)

Create an abstract class (JavaBean) of the Resource that retains collection of link information.

It is assumed that this is the class inherited by the Resource class supporting hypermedia link.

(3)

Define a field that retains information of multiple links.

In the above example, @JsonInclude(JsonInclude.Include.NON_EMPTY) is specified to prevent output to JSON when link is not specified.

(4)

Create a method to add link information.

(5)

If required, create a method to add common link information.

In the above example, methods to add link information for accessing the resource itself ("self") and to add link information for accessing parent resource ("parent") are created.

5.1.6.3.2. Implementation for each resource ¶

Inherit an abstract class of Resource that retains collection of link information in Resource class.

package org.terasoluna.examples.rest.api.member;

// (1)
public class MemberResource extends
    AbstractLinksSupportedResource implements Serializable {

    // omitted

}
Sr. No. Description

(1)

Inherit an abstract class of Resource that retains collection of link information.

By this, the field (links) that retains collection of link information is imported, thus making it a Resource class that supports hypermedia link.

Adding hypermedia link by REST API process.

@RequestMapping("members")
@RestController
public class MemberRestController {

    // omitted

    @RequestMapping(value = "{memberId}", method = RequestMethod.GET)
    @ResponseStatus(HttpStatus.OK)
    public MemberResource getMember(
            @PathVariable("memberId") String memberId
            // (2)
            UriComponentsBuilder uriBuilder) {

        Member member = memberService.getMember(memberId);

        MemberResource responseResource = beanMapper.map(member,
                MemberResource.class);

        // (3)
        responseResource.addSelf(uriBuilder.path("/members").pathSegment(memberId)
                .build().toUri());

        return responseResource;
    }

    // omitted

}
Sr. No. Description

(2)

Specify org.springframework.web.util.UriComponentsBuilder

class, provided by Spring MVC, in method argument in order to build URI set in link information.

When UriComponentsBuilder class is specified in method argument of Controller, instance of org.springframework.web.servlet.support.ServletUriComponentsBuilder class,

that has inherited UriComponentsBuilder class in Spring MVC, is passed at the time of method execution.

(3)

Add link information to resource.

In the above example, UriComponentsBuilder class method is called to build URI set in link information and URI to access to one’s resource is added to resource.

ServletUriComponentsBuilder instances passed as method argument of Controller are initiated based on the information of <servlet-mapping> element described in web.xml. It is not resource dependent.

By using URI Template Patterns ,etc. provided in Spring Framework,

an URI can be built based on the request information. Thus, a generic build process which is independent of a resource, can be implemented.

In the above example, when GET is done for http://example.com/api/v1/members/M000000001, built URI is same as the requested URI (http://example.com/api/v1/members/M000000001).

Method that builds an URI to be set in link information should be implemented as required.

Tip

When building an URL in ServletUriComponentsBuilder, by referring to “X-Forwarded-Host ” header, a configuration with a load balancer or Web server between client and the application server is considered. However, it should be noted that the expected URI will not be built if it does not match with the path configuration.

Response example

Following response is obtained in actual operation.

GET /rest-api-web/api/v1/members/M000000001 HTTP/1.1
Accept: text/plain, application/json, application/*+json, */*
User-Agent: Java/1.7.0_51
Host: localhost:8080
Connection: keep-alive

{
  "links" : [ {
    "rel" : "self",
    "href" : "http://localhost:8080/rest-api-web/api/v1/members/M000000001"
  } ],
  "memberId" : "M000000001",
  "firstName" : "John",
  "lastName" : "Smith",
  "genderCode" : "1",
  "dateOfBirth" : "2013-03-14",
  "emailAddress" : "user1394794959984@test.com",
  "telephoneNumber" : "09012345678",
  "zipCode" : "1710051",
  "address" : "Tokyo",
  "credential" : {
    "signId" : "user1394794959984@test.com",
    "passwordLastChangedAt" : "2014-03-14T11:02:41.477Z",
    "lastModifiedAt" : "2014-03-14T11:02:41.477Z"
  },
  "createdAt" : "2014-03-14T11:02:41.477Z",
  "lastModifiedAt" : "2014-03-14T11:02:41.477Z"
}

5.1.6.4. Creating RESTful Web Service conforming to HTTP specifications ¶

A part of REST API implementation explained in this version does not conform to HTTP specifications.

This section explains the implementation that creates the RESTful Web Service conforming to HTTP specifications.

5.1.6.4.1. Settings for location header at the time of POST ¶

When conforming to HTTP specifications, it is necessary to set the URI of created resource in the response header of POST method (“Location header”).

Implementation to set the URI of created resource in the response header in case of POST (“Location header”) is explained here.

5.1.6.4.2. Implementation for each resource ¶

The URI of created resource is set in Location header by REST API process.

@RequestMapping("members")
@RestController
public class MemberRestController {

    // omitted

    @RequestMapping(method = RequestMethod.POST)
    public ResponseEntity<MemberResource> postMembers(
            @RequestBody @Validated({ PostMembers.class, Default.class })
            MemberResource requestedResource,
            // (1)
            UriComponentsBuilder uriBuilder) {

        Member creatingMember = beanMapper.map(requestedResource, Member.class);

        Member createdMember = memberService.createMember(creatingMember);

        MemberResource responseResource = beanMapper.map(createdMember,
                MemberResource.class);

        // (2)
        URI createdUri = uriBuilder.path("/members/{memberId}")
                .buildAndExpand(responseResource.getMemberId()).toUri();

        // (3)
        return ResponseEntity.created(createdUri).body(responseResource);
    }

    // omitted

}
Sr. No. Description

(1)

Specify org.springframework.web.util.UriComponentsBuilder class provided by Spring MVC, in method argument in order to build an URI of created resource.

When UriComponentsBuilder class is specified in method argument of Controller, an instance of org.springframework.web.servlet.support.ServletUriComponentsBuilder class,

that has inherited UriComponentsBuilder class by Spring MVC, is passed at the time of method execution.

(2)

Build an URI of created resource.

In above example, by path method, a path using URI Template Patterns is added to ServletUriComponentsBuilder instance passed as argument,

buildAndExpand method is called and an URI of created resource is built by binding the ID of created resource.

ServletUriComponentsBuilder instances passed as method argument of Controller are initiated based on the information of <servlet-mapping> element described in web.xml. It is not resource dependent.

By using URI Template Patterns ,etc. provided by Spring Framework,

an URI can be built based on the request information. Thus, a generic build process which is independent of a resource, can be implemented.

For example, if POST method is used for http://example.com/api/v1/members, the built URI will be “requested URI + "/" + ID of created resource”.

Typically, if "M000000001" is specified in ID, it becomes http://example.com/api/v1/members/M000000001.

Method that builds an URI to be set in link information should be implemented as required.

(3)

Create the org.springframework.http.ResponseEntity instance using following parameters, and return it.

Status code : 201(Created)

Location header : Created resource’s URI

Response body : Created resource object

Tip

When building an URL in ServletUriComponentsBuilder, by referring to “X-Forwarded-Host ” header, a configuration with a load balancer or Web server between client and the application server is considered. However, it should be noted that the expected URI will not be built if it does not match with the path configuration.

Response example

Following response header is obtained in the actual operation.

HTTP/1.1 201 Created
Server: Apache-Coyote/1.1
X-Track: 693e132312d64998a7d8d6cabf3d13ef
Location: http://localhost:8080/rest-api-web/api/v1/members/M000000001
Content-Type: application/json;charset=UTF-8
Transfer-Encoding: chunked
Date: Fri, 14 Mar 2014 12:34:31 GMT

5.1.6.5. Disabling CSRF measures ¶

Settings that prevent CSRF measures implementation for RESTful Web Service requests, are explained below.

Tip

Need to use session is eliminated when CSRF measures are not to be implemented.

In the following configuration example, session will not be used in Spring Security process.

CSRF measures are enabled as per the default settings of Blank project. By adding following settings, the process for CSRF measures is prevented for RESTful Web Service requests.

spring-security.xml

<sec:http
    pattern="/api/v1/**"
    create-session="stateless">
    <sec:http-basic />
    <sec:csrf disabled="true"/>
</sec:http>

<sec:http>
    <sec:access-denied-handler ref="accessDeniedHandler"/>
    <sec:custom-filter ref="userIdMDCPutFilter" after="ANONYMOUS_FILTER"/>
    <sec:form-login/>
    <sec:logout/>
    <sec:session-management />
</sec:http>


Sr. No. Description

(1)

Add Spring Security definition for REST API.

URL pattern of REST API request path is specified in pattern attribute of <sec:http> element.

In the above example, request path starting with /api/v1/ is handled as the REST API request path.

Further, session is no longer used in Spring Security process by setting create-session attribute to stateless.

Specify disabled="true" in <sec:csrf> element for invalidating CSRF countermeasures.

5.1.6.6. Enabling XXE Injection measures ¶

When handling XML format data in RESTful Web Service, it is necessary to implement XXE (XML External Entity) Injection measures.

terasoluna-gfw-web 1.0.1.RELEASE or higher versions are Spring MVC (3.2.10.RELEASE and above) dependent. As these Spring MVC versions implement XXE Injection measures, it is not necessary to implement them individually.

Warning

XXE (XML External Entity) Injection measures

When using terasoluna-gfw-web 1.0.0.RELEASE, a class provided by Spring-oxm should be used, as this version is dependent on the Spring MVC version (3.2.4.RELEASE), that does not implement XXE Injection measures.

Adding Spring-oxm as dependent artifact.

pom.xml

<dependency>
    <groupId>org.springframework</groupId>
    <artifactId>spring-oxm</artifactId>
    <version>${org.springframework-version}</version> 
</dependency>


Sr. No.

Description

(1)

Add Spring-oxm as a dependent artifact.

(2)

Spring version should be fetched from the placeholder (${org.springframework-version}) that manages version number of Spring defined in pom.xml of terasoluna-gfw-parent.

Perform Bean definition for mutual conversion between XML and object by using the class provided by Spring-oxm.

spring-mvc-rest.xml

<bean id="xmlMarshaller" class="org.springframework.oxm.jaxb.Jaxb2Marshaller">
    <property name="packagesToScan" value="com.examples.app" /> 
</bean>



<mvc:annotation-driven>

    <mvc:message-converters>
        
        <bean class="org.springframework.http.converter.xml.MarshallingHttpMessageConverter">
            <property name="marshaller" ref="xmlMarshaller" /> 
            <property name="unmarshaller" ref="xmlMarshaller" /> 
        </bean>
    </mvc:message-converters>

    

</mvc:annotation-driven>


Sr. No.

Description

(1)

Perform Bean definition for Jaxb2Marshaller provided by Spring-oxm.

For Jaxb2Marshaller, XXE injection measures are carried out by default.

(2)

Specify package name with JAXB JavaBean (JavaBean assigned with javax.xml.bind.annotation.XmlRootElement annotation) stored in packagesToScan property.

JAXB JavaBean stored under the specified package is scanned and is registered as JavaBean for marshalling and unmarshalling.

JavaBean is scanned by the mechanism same as base-package attribute of <context:component-scan>.

(3)

Add bean definition of MarshallingHttpMessageConverter to <mvc:message-converters> element which is the child element of <mvc:annotation-driven> element.

(4)

Specify Jaxb2Marshaller bean defined in (1) in marshaller property.

(5)

Specify Jaxb2Marshaller bean defined in (1) in unmarshaller property.

5.1.6.7. How to copy Joda-Time classes using Dozer ¶

How to copy Joda-Time classes (org.joda.time.DateTime, org.joda.time.LocalDate etc.) using Dozer is explained here.

Create a custom converter for converting the Joda-Time class.

For details of custom converter, refer to “Bean Mapping (Dozer)”.

JodaDateTimeConverter.java

package org.terasoluna.examples.rest.infra.dozer.converter;

import org.dozer.DozerConverter;
import org.joda.time.DateTime;

public class JodaDateTimeConverter extends DozerConverter<DateTime, DateTime> {

    public JodaDateTimeConverter() {
        super(DateTime.class, DateTime.class);
    }

    @Override
    public DateTime convertTo(DateTime source, DateTime destination) {
        // This method not called, because type of from/to is same.
        return convertFrom(source, destination);
    }

    @Override
    public DateTime convertFrom(DateTime source, DateTime destination) {
        return source;
    }

}

JodaLocalDateConverter.java

package org.terasoluna.examples.rest.infra.dozer.converter;

import org.dozer.DozerConverter;
import org.joda.time.LocalDate;

public class JodaLocalDateConverter extends
                                   DozerConverter<LocalDate, LocalDate> {

    public JodaLocalDateConverter() {
        super(LocalDate.class, LocalDate.class);
    }

    @Override
    public LocalDate convertTo(LocalDate source, LocalDate destination) {
        // This method not called, because type of from/to is same.
        return convertFrom(source, destination);
    }

    @Override
    public LocalDate convertFrom(LocalDate source, LocalDate destination) {
        return source;
    }

}

Apply the created Custom converter to Dozer.

For details of custom converter, refer to Bean Mapping (Dozer).

<?xml version="1.0" encoding="UTF-8"?>
<mappings xmlns="http://dozer.sourceforge.net" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="
        http://dozer.sourceforge.net http://dozer.sourceforge.net/schema/beanmapping.xsd
    ">

    <configuration>
        <custom-converters>
            
            <converter type="org.terasoluna.examples.rest.infra.dozer.converter.JodaDateTimeConverter">
                <class-a>org.joda.time.DateTime</class-a>
                <class-b>org.joda.time.DateTime</class-b>
            </converter>
            <converter type="org.terasoluna.examples.rest.infra.dozer.converter.JodaLocalDateConverter">
                <class-a>org.joda.time.LocalDate</class-a>
                <class-b>org.joda.time.LocalDate</class-b>
            </converter>
        </custom-converters>
    </configuration>

</mappings>
Sr. No. Description

(1)

Create a file that defines operation settings for Dozer.

In this implementation, it is stored in /xxx-domain/src/main/resources/META-INF/dozer/dozer-configration-mapping.xml.

(2)

In the above example, custom converter definitions for Joda-Time classes (org.joda.time.DateTime and org.joda.time.LocalDate) are added.

Note

When Dozer is used in domain layer as well, it is recommended to store the file defining Dozer operation settings, in domain layer project (xxx-domain).

When Dozer is used only in application layer, it may be stored in application layer project (xxx-web).

5.1.6.8. Source code for application layer ¶

Out of the application layer source codes used in explanation How to use, full version of the source code that was pasted in fragments, is attached herewith.

Sr. No.

Section

File name

(1)

REST API implementation

MemberRestController.java

(2)

Implementing exception handling

ApiErrorCreator.java

(3)

ApiGlobalExceptionHandler.java

Following files are excluded.

JavaBean

Configuration file

5.1.6.8.1. MemberRestController.java ¶

java/org/terasoluna/examples/rest/api/member/MemberRestController.java

package org.terasoluna.examples.rest.api.member;

import java.util.ArrayList;
import java.util.List;

import javax.inject.Inject;
import javax.validation.groups.Default;

import org.dozer.Mapper;
import org.springframework.data.domain.Page;
import org.springframework.data.domain.PageImpl;
import org.springframework.data.domain.Pageable;
import org.springframework.http.HttpStatus;

import org.springframework.validation.annotation.Validated;
import org.springframework.web.bind.annotation.PathVariable;
import org.springframework.web.bind.annotation.RequestBody;
import org.springframework.web.bind.annotation.RequestMapping;
import org.springframework.web.bind.annotation.RequestMethod;

import org.springframework.web.bind.annotation.ResponseStatus;
import org.springframework.web.bind.annotation.RestController;
import org.terasoluna.examples.rest.api.member.MemberResource.PostMembers;
import org.terasoluna.examples.rest.api.member.MemberResource.PutMember;
import org.terasoluna.examples.rest.domain.model.Member;
import org.terasoluna.examples.rest.domain.service.member.MemberService;

@RequestMapping("members")
@RestController
public class MemberRestController {

    @Inject
    MemberService memberService;

    @Inject
    Mapper beanMapper;

    @RequestMapping(method = RequestMethod.GET)

    @ResponseStatus(HttpStatus.OK)
    public Page<MemberResource> getMembers(@Validated MembersSearchQuery query,
            Pageable pageable) {

        Page<Member> page = memberService.searchMembers(query.getName(), pageable);

        List<MemberResource> memberResources = new ArrayList<>();
        for (Member member : page.getContent()) {
            memberResources.add(beanMapper.map(member, MemberResource.class));
        }
        Page<MemberResource> responseResource =
            new PageImpl<>(memberResources, pageable, page.getTotalElements());

        return responseResource;
    }

    @RequestMapping(method = RequestMethod.GET)

    @ResponseStatus(HttpStatus.OK)
    public List<MemberResource> getMembers() {
        List<Member> members = memberService.findAll();

        List<MemberResource> memberResources = new ArrayList<>();
        for (Member member : members) {
            memberResources.add(beanMapper.map(member, MemberResource.class));
        }
        return memberResources;
    }

    @RequestMapping(method = RequestMethod.POST)

    @ResponseStatus(HttpStatus.CREATED)
    public MemberResource postMembers(@RequestBody @Validated({
            PostMembers.class, Default.class }) MemberResource requestedResource) {

        Member creatingMember = beanMapper.map(requestedResource, Member.class);

        Member createdMember = memberService.createMember(creatingMember);

        MemberResource responseResource = beanMapper.map(createdMember,
                MemberResource.class);

        return responseResource;
    }

    @RequestMapping(value = "{memberId}", method = RequestMethod.GET)

    @ResponseStatus(HttpStatus.OK)
    public MemberResource getMember(@PathVariable("memberId") String memberId) {

        Member member = memberService.getMember(memberId);

        MemberResource responseResource = beanMapper.map(member,
                MemberResource.class);

        return responseResource;
    }

    @RequestMapping(value = "{memberId}", method = RequestMethod.PUT)

    @ResponseStatus(HttpStatus.OK)
    public MemberResource putMember(
            @PathVariable("memberId") String memberId,
            @RequestBody @Validated({
            PutMember.class, Default.class }) MemberResource requestedResource) {

        Member updatingMember = beanMapper.map(requestedResource, Member.class);

        Member updatedMember = memberService.updateMember(memberId,
                updatingMember);

        Member updatedMember = memberService.updateMember(memberId,
                MemberResource.class);

        return responseResource;
    }

    @RequestMapping(value = "{memberId}", method = RequestMethod.DELETE)

    @ResponseStatus(HttpStatus.NO_CONTENT)
    public void deleteMember(@PathVariable("memberId") String memberId) {

        memberService.deleteMember(memberId);

    }

}

5.1.6.8.2. ApiErrorCreator.java ¶

java/org/terasoluna/examples/rest/api/common/error/ApiErrorCreator.java

package org.terasoluna.examples.rest.api.common.error;

import javax.inject.Inject;

import org.springframework.context.MessageSource;
import org.springframework.context.support.DefaultMessageSourceResolvable;
import org.springframework.stereotype.Component;
import org.springframework.validation.BindingResult;
import org.springframework.validation.FieldError;
import org.springframework.validation.ObjectError;
import org.springframework.web.context.request.WebRequest;
import org.terasoluna.gfw.common.message.ResultMessage;
import org.terasoluna.gfw.common.message.ResultMessages;

@Component
public class ApiErrorCreator {

    @Inject
    MessageSource messageSource;

    public ApiError createApiError(WebRequest request, String errorCode,
            String defaultErrorMessage, Object... arguments) {
        String localizedMessage = messageSource.getMessage(errorCode,
                arguments, defaultErrorMessage, request.getLocale());
        return new ApiError(errorCode, localizedMessage);
    }

    public ApiError createBindingResultApiError(WebRequest request,
            String errorCode, BindingResult bindingResult,
            String defaultErrorMessage) {
        ApiError apiError = createApiError(request, errorCode,
                defaultErrorMessage);
        for (FieldError fieldError : bindingResult.getFieldErrors()) {
            apiError.addDetail(createApiError(request, fieldError, fieldError
                    .getField()));
        }
        for (ObjectError objectError : bindingResult.getGlobalErrors()) {
            apiError.addDetail(createApiError(request, objectError, objectError
                    .getObjectName()));
        }
        return apiError;
    }

    private ApiError createApiError(WebRequest request,
            DefaultMessageSourceResolvable messageResolvable, String target) {
        String localizedMessage = messageSource.getMessage(messageResolvable,
                request.getLocale());
        return new ApiError(messageResolvable.getCode(), localizedMessage, target);
    }

    public ApiError createResultMessagesApiError(WebRequest request,
            String rootErrorCode, ResultMessages resultMessages,
            String defaultErrorMessage) {
        ApiError apiError;
        if (resultMessages.getList().size() == 1) {
            ResultMessage resultMessage = resultMessages.iterator().next();
            String errorCode = resultMessage.getCode();
            String errorText = resultMessage.getText();
            if (errorCode == null && errorText == null) {
                errorCode = rootErrorCode;
            }
            apiError = createApiError(request, errorCode, errorText,
                    resultMessage.getArgs());
        } else {
            apiError = createApiError(request, rootErrorCode,
                    defaultErrorMessage);
            for (ResultMessage resultMessage : resultMessages.getList()) {
                apiError.addDetail(createApiError(request, resultMessage
                        .getCode(), resultMessage.getText(), resultMessage
                        .getArgs()));
            }
        }
        return apiError;
    }

}

5.1.6.8.3. ApiGlobalExceptionHandler.java ¶

java/org/terasoluna/examples/rest/api/common/error/ApiGlobalExceptionHandler.java

package org.terasoluna.examples.rest.api.common.error;

import javax.inject.Inject;

import org.springframework.dao.OptimisticLockingFailureException;
import org.springframework.dao.PessimisticLockingFailureException;
import org.springframework.http.HttpHeaders;
import org.springframework.http.HttpStatus;
import org.springframework.http.ResponseEntity;
import org.springframework.http.converter.HttpMessageNotReadableException;
import org.springframework.validation.BindException;
import org.springframework.validation.BindingResult;
import org.springframework.web.bind.MethodArgumentNotValidException;
import org.springframework.web.bind.annotation.ControllerAdvice;
import org.springframework.web.bind.annotation.ExceptionHandler;
import org.springframework.web.context.request.WebRequest;
import org.springframework.web.servlet.mvc.method.annotation.ResponseEntityExceptionHandler;
import org.terasoluna.gfw.common.exception.BusinessException;
import org.terasoluna.gfw.common.exception.ExceptionCodeResolver;
import org.terasoluna.gfw.common.exception.ResourceNotFoundException;
import org.terasoluna.gfw.common.exception.ResultMessagesNotificationException;

@ControllerAdvice
public class ApiGlobalExceptionHandler extends ResponseEntityExceptionHandler {

    @Inject
    ApiErrorCreator apiErrorCreator;

    @Inject
    ExceptionCodeResolver exceptionCodeResolver;

    @Override
    protected ResponseEntity<Object> handleExceptionInternal(Exception ex,
            Object body, HttpHeaders headers, HttpStatus status,
            WebRequest request) {
        final Object apiError;
        if (body == null) {
            String errorCode = exceptionCodeResolver.resolveExceptionCode(ex);
            apiError = apiErrorCreator.createApiError(request, errorCode, ex
                    .getLocalizedMessage());
        } else {
            apiError = body;
        }
        return ResponseEntity.status(status).headers(headers).body(apiError);
    }

    @Override
    protected ResponseEntity<Object> handleMethodArgumentNotValid(
            MethodArgumentNotValidException ex, HttpHeaders headers,
            HttpStatus status, WebRequest request) {
        return handleBindingResult(ex, ex.getBindingResult(), headers, status,
                request);
    }

    @Override
    protected ResponseEntity<Object> handleBindException(BindException ex,
            HttpHeaders headers, HttpStatus status, WebRequest request) {
        return handleBindingResult(ex, ex.getBindingResult(), headers, status,
                request);
    }

    private ResponseEntity<Object> handleBindingResult(Exception ex,
            BindingResult bindingResult, HttpHeaders headers,
            HttpStatus status, WebRequest request) {
        String errorCode = exceptionCodeResolver.resolveExceptionCode(ex);
        ApiError apiError = apiErrorCreator.createBindingResultApiError(
                request, errorCode, bindingResult, ex.getMessage());
        return handleExceptionInternal(ex, apiError, headers, status, request);
    }

    @Override
    protected ResponseEntity<Object> handleHttpMessageNotReadable(
            HttpMessageNotReadableException ex, HttpHeaders headers,
            HttpStatus status, WebRequest request) {
        if (ex.getCause() instanceof Exception) {
            return handleExceptionInternal((Exception) ex.getCause(), null,
                    headers, status, request);
        } else {
            return handleExceptionInternal(ex, null, headers, status, request);
        }
    }

    @ExceptionHandler(ResourceNotFoundException.class)
    public ResponseEntity<Object> handleResourceNotFoundException(
            ResourceNotFoundException ex, WebRequest request) {
        return handleResultMessagesNotificationException(ex, new HttpHeaders(),
                HttpStatus.NOT_FOUND, request);
    }

    @ExceptionHandler(BusinessException.class)
    public ResponseEntity<Object> handleBusinessException(BusinessException ex,
            WebRequest request) {
        return handleResultMessagesNotificationException(ex, new HttpHeaders(),
                HttpStatus.CONFLICT, request);
    }

    private ResponseEntity<Object> handleResultMessagesNotificationException(
            ResultMessagesNotificationException ex, HttpHeaders headers,
            HttpStatus status, WebRequest request) {
        String errorCode = exceptionCodeResolver.resolveExceptionCode(ex);
        ApiError apiError = apiErrorCreator.createResultMessagesApiError(
                request, errorCode, ex.getResultMessages(), ex.getMessage());
        return handleExceptionInternal(ex, apiError, headers, status, request);
    }

    @ExceptionHandler({ OptimisticLockingFailureException.class,
            PessimisticLockingFailureException.class })
    public ResponseEntity<Object> handleLockingFailureException(Exception ex,
            WebRequest request) {
        return handleExceptionInternal(ex, null, new HttpHeaders(),
                HttpStatus.CONFLICT, request);
    }

    @ExceptionHandler(Exception.class)
    public ResponseEntity<Object> handleSystemError(Exception ex,
            WebRequest request) {
        return handleExceptionInternal(ex, null, new HttpHeaders(),
                HttpStatus.INTERNAL_SERVER_ERROR, request);
    }

}

5.1.6.9. Source code of the domain layer class created at the time of REST API implementation ¶

Source code of domain layer class called from REST API explained in How to use is attached herewith.

Also, infrastructure layer is implemented by using MyBatis3.

Sr. No.

Classification

File name

(1)

model

Member.java

(2)

MemberCredentia.java

(3)

Gender.java

(4)

repository

MemberRepository.java

(5)

service

MemberService.java

(6)

MemberServiceImpl.java

(7)

other

DomainMessageCodes.java

(8)

GenderTypeHandler.java

(9)

member-mapping.xml

(10)

mybatis-config.xml

(11)

MemberRepository.xml

Following files are excluded.

JavaBean other than Entity

Configuration files other than Dozer

5.1.6.9.1. Member.java ¶

java/org/terasoluna/examples/rest/domain/model/Member.java

package org.terasoluna.examples.rest.domain.model;

import java.io.Serializable;
import org.joda.time.DateTime;
import org.joda.time.LocalDate;

public class Member implements Serializable {

    private static final long serialVersionUID = 1L;

    private String memberId;

    private String firstName;

    private String lastName;

    private Gender gender;

    private LocalDate dateOfBirth;

    private String emailAddress;

    private String telephoneNumber;

    private String zipCode;

    private String address;

    private DateTime createdAt;

    private DateTime lastModifiedAt;

    private long version;

    private MemberCredential credential;

    public String getMemberId() {
        return memberId;
    }

    public void setMemberId(String memberId) {
        this.memberId = memberId;
    }

    public String getFirstName() {
        return firstName;
    }

    public void setFirstName(String firstName) {
        this.firstName = firstName;
    }

    public String getLastName() {
        return lastName;
    }

    public void setLastName(String lastName) {
        this.lastName = lastName;
    }

    public Gender getGender() {
        return gender;
    }

    public void setGender(Gender gender) {
        this.gender = gender;
    }

    public String getGenderCode() {
        if (gender == null) {
            return null;
        } else {
            return gender.getCode();
        }
    }

    public void setGenderCode(String genderCode) {
        this.gender = Gender.getByCode(genderCode);
    }

    public LocalDate getDateOfBirth() {
        return dateOfBirth;
    }

    public void setDateOfBirth(LocalDate dateOfBirth) {
        this.dateOfBirth = dateOfBirth;
    }

    public String getEmailAddress() {
        return emailAddress;
    }

    public void setEmailAddress(String emailAddress) {
        this.emailAddress = emailAddress;
    }

    public String getTelephoneNumber() {
        return telephoneNumber;
    }

    public void setTelephoneNumber(String telephoneNumber) {
        this.telephoneNumber = telephoneNumber;
    }

    public String getZipCode() {
        return zipCode;
    }

    public void setZipCode(String zipCode) {
        this.zipCode = zipCode;
    }

    public String getAddress() {
        return address;
    }

    public void setAddress(String address) {
        this.address = address;
    }

    public DateTime getCreatedAt() {
        return createdAt;
    }

    public void setCreatedAt(DateTime createdAt) {
        this.createdAt = createdAt;
    }

    public DateTime getLastModifiedAt() {
        return lastModifiedAt;
    }

    public void setLastModifiedAt(DateTime lastModifiedAt) {
        this.lastModifiedAt = lastModifiedAt;
    }

    public long getVersion() {
        return version;
    }

    public void setVersion(long version) {
        this.version = version;
    }

    public MemberCredential getCredential() {
        return credential;
    }

    public void setCredential(MemberCredential credential) {
        this.credential = credential;
    }

}

5.1.6.9.2. MemberCredentia.java ¶

java/org/terasoluna/examples/rest/domain/model/MemberCredential.java

package org.terasoluna.examples.rest.domain.model;

import java.io.Serializable;
import org.joda.time.DateTime;

public class MemberCredential implements Serializable {

    private static final long serialVersionUID = 1L;

    private String memberId;

    private String signId;

    private String password;

    private String previousPassword;

    private DateTime passwordLastChangedAt;

    private DateTime lastModifiedAt;

    private long version;

    public String getMemberId() {
        return memberId;
    }

    public void setMemberId(String memberId) {
        this.memberId = memberId;
    }

    public String getSignId() {
        return signId;
    }

    public void setSignId(String signId) {
        this.signId = signId;
    }

    public String getPassword() {
        return password;
    }

    public void setPassword(String password) {
        this.password = password;
    }

    public String getPreviousPassword() {
        return previousPassword;
    }

    public void setPreviousPassword(String previousPassword) {
        this.previousPassword = previousPassword;
    }

    public DateTime getPasswordLastChangedAt() {
        return passwordLastChangedAt;
    }

    public void setPasswordLastChangedAt(DateTime passwordLastChangedAt) {
        this.passwordLastChangedAt = passwordLastChangedAt;
    }

    public DateTime getLastModifiedAt() {
        return lastModifiedAt;
    }

    public void setLastModifiedAt(DateTime lastModifiedAt) {
        this.lastModifiedAt = lastModifiedAt;
    }

    public long getVersion() {
        return version;
    }

    public void setVersion(long version) {
        this.version = version;
    }

}

5.1.6.9.3. Gender.java ¶

java/org/terasoluna/examples/rest/domain/model/Gender.java

package org.terasoluna.examples.rest.domain.model;

import java.util.Collections;
import java.util.HashMap;
import java.util.Map;

import org.springframework.util.Assert;

public enum Gender {

    UNKNOWN("0"), MEN("1"), WOMEN("2");

    private static final Map<String, Gender> genderMap;

    static {
        Map<String, Gender> map = new HashMap<>();
        for (Gender gender : values()) {
            map.put(gender.code, gender);
        }
        genderMap = Collections.unmodifiableMap(map);
    }

    private final String code;

    private Gender(String code) {
        this.code = code;
    }

    public static Gender getByCode(String code) {
        Gender gender = genderMap.get(code);
        Assert.notNull(gender, "gender code is invalid. code : " + code);
        return gender;
    }

    public String getCode() {
        return code;
    }

}

5.1.6.9.4. MemberRepository.java ¶

java/org/terasoluna/examples/rest/domain/repository/member/MemberRepository.java

package org.terasoluna.examples.rest.domain.repository.member;

import java.util.List;
import org.apache.ibatis.session.RowBounds;

import org.terasoluna.examples.rest.domain.model.Member;

public interface MemberRepository {

    Member findOne(String memberId);

    List<Member> findAll();

    long countByContainsName(String name);
    List<Member> findPageByContainsName(String name, RowBounds rowBounds);

    void createMember(Member creatingMember);
    void createCredential(Member creatingMember);

    boolean updateMember(Member updatingMember);

    void deleteMember(String memberId);
    void deleteCredential(String memberId);

}

5.1.6.9.5. MemberService.java ¶

java/org/terasoluna/examples/rest/domain/service/member/MemberService.java

package org.terasoluna.examples.rest.domain.service.member;

import java.util.List;
import org.springframework.data.domain.Page;
import org.springframework.data.domain.Pageable;
import org.terasoluna.examples.rest.domain.model.Member;

public interface MemberService {

    List<Member> findAll();

    Page<Member> searchMembers(String name, Pageable pageable);

    Member getMember(String memberId);

    Member createMember(Member creatingMember);

    Member updateMember(String memberId, Member updatingMember);

    void deleteMember(String memberId);

}

5.1.6.9.6. MemberServiceImpl.java ¶

java/org/terasoluna/examples/rest/domain/service/member/MemberServiceImpl.java

package org.terasoluna.examples.rest.domain.service.member;

import java.util.ArrayList;
import java.util.List;
import javax.inject.Inject;
import org.apache.ibatis.session.RowBounds;
import org.dozer.Mapper;
import org.joda.time.DateTime;
import org.springframework.dao.DuplicateKeyException;
import org.springframework.data.domain.Page;
import org.springframework.data.domain.PageImpl;
import org.springframework.data.domain.Pageable;
import org.springframework.orm.ObjectOptimisticLockingFailureException;
import org.springframework.security.crypto.password.PasswordEncoder;
import org.springframework.stereotype.Service;
import org.springframework.transaction.annotation.Transactional;
import org.springframework.util.StringUtils;
import org.terasoluna.examples.rest.domain.message.DomainMessageCodes;
import org.terasoluna.examples.rest.domain.model.Member;
import org.terasoluna.examples.rest.domain.model.MemberCredential;
import org.terasoluna.examples.rest.domain.repository.member.MemberRepository;
import org.terasoluna.gfw.common.date.jodatime.JodaTimeDateFactory;
import org.terasoluna.gfw.common.exception.BusinessException;
import org.terasoluna.gfw.common.exception.ResourceNotFoundException;
import org.terasoluna.gfw.common.message.ResultMessages;

@Transactional
@Service
public class MemberServiceImpl implements MemberService {

    @Inject
    MemberRepository memberRepository;

    @Inject
    JodaTimeDateFactory dateFactory;

    @Inject
    PasswordEncoder passwordEncoder;

    @Inject
    Mapper beanMapper;

    @Override
    @Transactional(readOnly = true)
    public List<RestMember> findAll() {
        return restMemberRepository.findAll();
    }

    @Override
    @Transactional(readOnly = true)
    public Page<Member> searchMembers(String name, Pageable pageable) {
        List<Member> members = null;
        // Count Members by search criteria
        long total = memberRepository.countByContainsName(name);
        if (0 < total) {
             RowBounds rowBounds = new RowBounds(pageable.getOffset(), pageable.getPageSize());
             members = memberRepository.findPageByContainsName(name, rowBounds);
        } else {
            members = new ArrayList<Member>();
        }
        return new PageImpl<Member>(members, pageable, total);
    }

    @Override
    @Transactional(readOnly = true)
    public Member getMember(String memberId) {
        // find member
        Member member = memberRepository.findOne(memberId);
        if (member == null) {
            // If member is not exists
            throw new ResourceNotFoundException(ResultMessages.error().add(
                            DomainMessageCodes.E_EX_MM_5001, memberId));
        }
        return member;
    }

    @Override
    public Member createMember(Member creatingMember) {
        MemberCredential creatingCredential = creatingMember
                            .getCredential();

        // get processing current date time
        DateTime currentDateTime = dateFactory.newDateTime();

        creatingMember.setCreatedAt(currentDateTime);
        creatingMember.setLastModifiedAt(currentDateTime);

        // decide sign id(email-address)
        String signId = creatingCredential.getSignId();
        if (!StringUtils.hasLength(signId)) {
            signId = creatingMember.getEmailAddress();
            creatingCredential.setSignId(signId.toLowerCase());
        }

        // encrypt password
        String rawPassword = creatingCredential.getPassword();
        creatingCredential.setPassword(passwordEncoder.encode(rawPassword));
        creatingCredential.setPasswordLastChangedAt(currentDateTime);
        creatingCredential.setLastModifiedAt(currentDateTime);

        // save member & member credential
        try {

            // Registering member details
            memberRepository.createMember(creatingMember);
            // //Registering credential details
            memberRepository.createCredential(creatingMember);
            return creatingMember;
        } catch (DuplicateKeyException e) {
            // If sign id is already used
            throw new BusinessException(ResultMessages.error().add(
                            DomainMessageCodes.E_EX_MM_8001,
                            creatingCredential.getSignId()), e);
        }
    }

    @Override
    public Member updateMember(String memberId, Member updatingMember) {
        // get member
        Member member = getMember(memberId);

        // override updating member attributes
        beanMapper.map(updatingMember, member, "member.update");

        // get processing current date time
        DateTime currentDateTime = dateFactory.newDateTime();
        member.setLastModifiedAt(currentDateTime);

        // save updating member
        boolean updated = memberRepository.updateMember(member);
        if (!updated) {
                throw new ObjectOptimisticLockingFailureException(Member.class,
                                member.getMemberId());
        }
        return member;
    }

    @Override
    public void deleteMember(String memberId) {

        // First Delete from credential (Child)
        memberRepository.deleteCredential(memberId);
        // Delete member
        memberRepository.deleteMember(memberId);
    }

}

5.1.6.9.7. DomainMessageCodes.java ¶

java/org/terasoluna/examples/rest/domain/message/DomainMessageCodes.java

package org.terasoluna.examples.rest.domain.message;

/**
 * Message codes of domain layer message.
 * @author DomainMessageCodesGenerator
 */
public class DomainMessageCodes {

    private DomainMessageCodes() {
        // NOP
    }

    /** e.ex.mm.5001=Specified member not found. member id : {0} */
    public static final String E_EX_MM_5001 = "e.ex.mm.5001";

    /** e.ex.mm.8001=Cannot use specified sign id. sign id : {0} */
    public static final String E_EX_MM_8001 = "e.ex.mm.8001";
}

5.1.6.9.8. GenderTypeHandler.java ¶

This is a TypeHandler for mapping the Enum type code value.

java/org/terasoluna/examples/infra/mybatis/typehandler/GenderTypeHandler.java

package org.terasoluna.examples.infra.mybatis.typehandler;

import java.sql.CallableStatement;
import java.sql.PreparedStatement;
import java.sql.ResultSet;
import java.sql.SQLException;
import org.terasoluna.examples.domain.model.Gender;
import org.apache.ibatis.type.JdbcType;
import org.apache.ibatis.type.BaseTypeHandler;

public class GenderTypeHandler extends BaseTypeHandler<Gender> {

    @Override
    public Gender getNullableResult(ResultSet rs, String columnName) throws SQLException {
            return getByCode(rs.getString(columnName));
    }

    @Override
    public Gender getNullableResult(ResultSet rs, int columnIndex) throws SQLException {
            return getByCode(rs.getString(columnIndex));
    }

    @Override
    public Gender getNullableResult(CallableStatement cs, int columnIndex)
                    throws SQLException {
            return getByCode(cs.getString(columnIndex));
    }

    @Override
    public void setNonNullParameter(PreparedStatement ps, int i,
                    Gender parameter, JdbcType jdbcType) throws SQLException {
            ps.setString(i, parameter.getCode());
    }

    private Gender getByCode(String byCode) {
            if (byCode == null) {
                return null;
            } else {
                return Gender.getByCode(byCode);
            }
    }
}

5.1.6.9.9. member-mapping.xml ¶

In the implemented Service class, “Bean Mapping (Dozer)” is used while copying the value specified by client in Member object.
When it is alright to simply copy the field values, Bean mapping definition need not be added. However, in this implementation it needs to be ensured that, items which are not to be updated (memberId, credential, createdAt and version) are not copied.
Bean mapping definition needs to be added in order to ensure that specific fields are not copied.

resources/META-INF/dozer/member-mapping.xml

<?xml version="1.0" encoding="UTF-8"?>
<mappings xmlns="http://dozer.sourceforge.net" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
    xsi:schemaLocation="http://dozer.sourceforge.net
          http://dozer.sourceforge.net/schema/beanmapping.xsd">

    <mapping map-id="member.update">
        <class-a>org.terasoluna.examples.rest.domain.model.Member</class-a>
        <class-b>org.terasoluna.examples.rest.domain.model.Member</class-b>
        <field-exclude>
            <a>memberId</a>
            <b>memberId</b>
        </field-exclude>
        <field-exclude>
            <a>credential</a>
            <b>credential</b>
        </field-exclude>
        <field-exclude>
            <a>createdAt</a>
            <b>createdAt</b>
        </field-exclude>
        <field-exclude>
            <a>lastModifiedAt</a>
            <b>lastModifiedAt</b>
        </field-exclude>
        <field-exclude>
            <a>version</a>
            <b>version</b>
        </field-exclude>
    </mapping>

</mappings>

5.1.6.9.10. mybatis-config.xml ¶

MyBatis3 operations can be customized by adding a configuration values in MyBatis configuration file. MyBatis3 does not support Joda-time classes (org.joda.time.DateTime, org.joda.time.LocalDateTime, org.joda.time.LocalDate etc.).
Hence, when Joda-Time class is used in the field of Entity class, it is necessary to provide a TypeHandler  for Joda-Time.
TypeHandler  implementation for mapping the org.joda.time.DateTime with java.sql.Timestamp is done by referring [Implementing TypeHandler for Joda-Time].

resources/META-INF/mybatis/mybatis-config.xml

<?xml version="1.0" encoding="UTF-8" ?>
<!DOCTYPE configuration PUBLIC "-//mybatis.org/DTD Config 3.0//EN"
    "http://mybatis.org/dtd/mybatis-3-config.dtd">
<configuration>

    <settings>
        <setting name="jdbcTypeForNull" value="NULL" />
        <setting name="mapUnderscoreToCamelCase" value="true" />
    </settings>

    <typeAliases>
        <package name="org.terasoluna.examples.infra.mybatis.typehandler" />
    </typeAliases>

    <typeHandlers>
       <package name="org.terasoluna.examples.infra.mybatis.typehandler" />
    </typeHandlers>

</configuration>

5.1.6.9.11. MemberRepository.xml ¶

resources/org/terasoluna/examples/rest/domain/repository/member/MemberRepository.xml

<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE mapper PUBLIC "-//mybatis.org//DTD Mapper 3.0//EN"
    "http://mybatis.org/dtd/mybatis-3-mapper.dtd">
<mapper
    namespace="org.terasoluna.examples.rest.domain.repository.member.MemberRepository">

    <resultMap id="MemberResultMap" type="Member">
        <id property="memberId" column="member_id" />
        <result property="firstName" column="first_name" />
        <result property="lastName" column="last_name" />
        <result property="gender" column="gender" />
        <result property="dateOfBirth" column="date_of_birth" />
        <result property="emailAddress" column="email_address" />
        <result property="telephoneNumber" column="telephone_number" />
        <result property="zipCode" column="zip_code" />
        <result property="address" column="address" />
        <result property="createdAt" column="created_at" />
        <result property="lastModifiedAt" column="last_modified_at" />
        <result property="version" column="version" />
        <result property="credential.memberId" column="member_id" />
        <result property="credential.signId" column="sign_id" />
        <result property="credential.password" column="password" />
        <result property="credential.previousPassword" column="previous_password" />
        <result property="credential.passwordLastChangedAt" column="password_last_changed_at" />
        <result property="credential.lastModifiedAt" column="credential_last_modified_at" />
        <result property="credential.version" column="credential_version" />
    </resultMap>

    <sql id="selectMember">
        SELECT
         member.member_id as member_id
         ,member.first_name as first_name
         ,member.last_name as last_name
         ,member.gender as gender
         ,member.date_of_birth as date_of_birth
         ,member.email_address as email_address
         ,member.telephone_number as telephone_number
         ,member.zip_code as zip_code
         ,member.address as address
         ,member.created_at as created_at
         ,member.last_modified_at as last_modified_at
         ,member.version as version
         ,credential.sign_id as sign_id
         ,credential.password as password
         ,credential.previous_password as previous_password
         ,credential.password_last_changed_at as password_last_changed_at
         ,credential.last_modified_at as credential_last_modified_at
         ,credential.version as credential_version
        FROM
         t_member member
         INNER JOIN t_member_credential credential ON credential.member_id = member.member_id
    </sql>

    <sql id="whereMember">
        WHERE
            member.first_name LIKE #{nameContainingCondition} ESCAPE '~'
            OR member.last_name LIKE #{nameContainingCondition} ESCAPE '~'
    </sql>

    <select id="findAll" resultMap="RestMemberResultMap">
        <include refid="selectRestMember" />
        ORDER BY member_id ASC
    </select>

        <select id="findOne" parameterType="string" resultMap="MemberResultMap">
        <include refid="selectMember" />
        WHERE
        member.member_id = #{memberId}
    </select>

    <select id="countByContainsName" parameterType="string" resultType="_long">
        <bind name="nameContainingCondition"
        value="@org.terasoluna.gfw.common.query.QueryEscapeUtils@toStartingWithCondition(_parameter)" />
        SELECT
        COUNT(*)
        FROM
        t_member member
        <include refid="whereMember" />
    </select>

    <select id="findPageByContainsName" parameterType="string"
        resultMap="MemberResultMap">
        <bind name="nameContainingCondition"
        value="@org.terasoluna.gfw.common.query.QueryEscapeUtils@toStartingWithCondition(_parameter)" />
        <include refid="selectMember" />
        <include refid="whereMember" />
        ORDER BY member_id ASC
    </select>

    <insert id="createMember" parameterType="Member">
        <selectKey keyProperty="memberId" resultType="string" order="BEFORE">
            SELECT 'M'||TO_CHAR(NEXTVAL('s_member'),'FM000000000')
        </selectKey>
        INSERT INTO
        t_member
        (
        member_id
        ,first_name
        ,last_name
        ,gender
        ,date_of_birth
        ,email_address
        ,telephone_number
        ,zip_code
        ,address
        ,created_at
        ,last_modified_at
        ,version
        )
        VALUES
        (
        #{memberId}
        ,#{firstName}
        ,#{lastName}
        ,#{gender}
        ,#{dateOfBirth}
        ,#{emailAddress}
        ,#{telephoneNumber}
        ,#{zipCode}
        ,#{address}
        ,#{createdAt}
        ,#{lastModifiedAt}
        ,1
        )
    </insert>

    <insert id="createCredential" parameterType="Member">
        INSERT INTO
        t_member_credential
        (
        member_id
        ,sign_id
        ,password
        ,previous_password
        ,password_last_changed_at
        ,last_modified_at
        ,version
        )
        VALUES
        (
        #{memberId}
        ,#{credential.signId}
        ,#{credential.password}
        ,#{credential.previousPassword}
        ,#{credential.passwordLastChangedAt}
        ,#{credential.lastModifiedAt}
        ,1
        )
    </insert>

    <update id="updateMember" parameterType="Member">
        UPDATE
            t_member
        SET
            first_name = #{firstName}
            ,last_name = #{lastName}
            ,gender = #{gender}
            ,date_of_birth = #{dateOfBirth}
            ,email_address = #{emailAddress}
            ,telephone_number = #{telephoneNumber}
            ,zip_code = #{zipCode}
            ,address = #{address}
            ,created_at = #{createdAt}
            ,last_modified_at = #{lastModifiedAt}
            ,version = version + 1
        WHERE
            member_id = #{memberId}
            AND version = #{version}
    </update>

    <delete id="deleteCredential" parameterType="string">
        DELETE FROM t_member_credential
        WHERE
        member_id = #{memberId}
    </delete>

    <delete id="deleteMember" parameterType="string">
        DELETE FROM t_member
        WHERE
        member_id = #{memberId}
    </delete>

</mapper>

Sr. No.	Description
(1)	A resource is directly exchanged between client application with user interface and RESTful Web Service. This pattern is used to separate user interface dependent logic with higher number of requirement & specification changes and the logic for a data model which is more universal with less number of changes.
(2)	Rather than directly exchanging the resource with client applications having user interface, the resource is exchanged between systems. This pattern is used while building a system wherein, the business data stored by each system is managed centrally.

Sr. No.	Function overview
(1)	It is a function which converts the JSON or XML format message set in request BODY, to Resource object (JavaBean) and delivers it to the Controller class method (REST API).
(2)	It is a function which implements input validation for the value stored in Resource object (JavaBean) that has been converted from message.
(3)	It is a function which converts Resource object (JavaBean) returned from the Controller class method (REST API) to JSON or XML format and sets it in response BODY.

Sr. No.	Process layer	Description
(1)	Spring MVC (Framework)	Spring MVC receives a request from client and determines the REST API (handler method of Controller) to be called.
(2)		Spring MVC converts the JSON format message specified in request BODY to Resource object by using `HttpMessageConverter`.
(3)		Spring MVC performs input validation for the value stored in Resource object using `Validator`.
(4)		Spring MVC calls REST API. Here, the Resource that has been converted from JSON and for which input validation is carried out, is delivered to REST API.
(5)	REST API	REST API calls Service method and performs the process for DomainObject such as Entity etc.
(6)		Service method calls the Repository method and performs CRUD process for the DomainObject such as Entity etc.
(7)	Spring MVC (Framework)	Spring MVC converts the Resource object returned from REST API to JSON format message, by using `HttpMessageConverter`.
(8)		Spring MVC sets JSON format message in response BODY and responds to client.

Sr. No.	Module name	Description
(1)	Controller class	A class that provides REST API. Controller class is created by resource unit and specifies end points (URI) of REST API for each resource. CRUD process for the resource is implemented by delegating it to the Service of domain layer.
(2)	Resource class	Java Bean representing JSON (or XML) that acts as I/O for REST API. Annotation for Bean Validation and annotation for controlling JSON or XML format are specified in this class.
(3)	Validator Class (Optional)	Class that implements correlation validation for input value. If the correlation validation for input value is unnecessary, this class need not be created. Hence, it is considered as optional. For input value correlation validation, refer to “Input Validation”.
(4)	Helper Class (Optional)	Class which implements the process that assists the process to be performed by the Controller. This class is created with the aim of simplifying the Controller processing. Basically, it implements a method that performs conversion of Resource object and DomainObject models. If the model can be converted simply by using copy of the value, “Bean Mapping (Dozer)” may be used without creating the Helper class. Hence, it is considered as optional.

Sr. No.	Architecture	Architecture overview
(1)	Publishing as a resource on Web	It is published as a Web resource through which information stored in the system is provided to the client.
(2)	Identifying the resource using URI	URI (Universal Resource Identifier) that can uniquely identify a Web resource is assigned to the resource published to the client.
(3)	Resource operations using HTTP methods	Resource related operations are implemented by using different HTTP methods (GET, POST, PUT and DELETE).
(4)	Using an appropriate format	JSON or XML that represents the data structure, is used as resource format.
(5)	Using the appropriate HTTP status code	Appropriate HTTP status code is set in the response returned to the client.

Sr. No.	Architecture	Architectural elements
(6)	Stateless communication between client and server	This element enables to perform the process only by the information requested from client, without retaining the application status on the server.
(7)	Link to related resource	It includes links to other resources (URI) inside a resource that are related to the specified resource.

Sr. No.	HTTP method	Resource operations	Post-conditions that the operation should ensure
(1)	GET	Resource is fetched.	Safety, idempotency.
(2)	POST	Resource is created.	Server assigns the URI for created resource, this assigned URI is set to Location header of response and is returned to client.
(4)	PUT	Resource is created or updated.	Idempotency.
(5)	PATCH	Resource difference is updated.	Idempotency.
(6)	DELETE	Resource is deleted.	Idempotency.
(7)	HEAD	Meta information of resource is fetched. Same process as GET is performed and responds with header only.	Safety, Idempotency.
(8)	OPTIONS	Responds with a list of HTTP methods that can be used for resources.	Safety, idempotency.

Sr. No.	Description
(1)	PUT method is called by specifying URI (ID) of the resource to be created in URI.
(2)	Entity is created for the ID specified in URI. If the entity has already been created with same ID, the contents are updated.
(3)	Created or updated resource is sent as a response.

Sr. No.	Description
(1)	POST method is called.
(2)	ID that identifies the requested resource is generated.
(3)	Entity for the ID generated in (2) is created.
(4)	Created resource is sent as a response. URI for accessing the generated resource is set in the Location header of response.

Sr. No.	Potential issues
(1)	Even in cases where only the process result (success and failure) is to be determined, unnecessary process has to be performed, as analysis process is mandatory for entity body.
(2)	Since it is mandatory to be aware of the unique error codes defined in the system while handling errors, it may adversely affect the architecture (design and implementation) at the client side.
(3)	Intuitive error analysis may be obstructed when analyzing error causes at client side, since understanding the meaning of unique error codes defined in the system is required for the same.

Sr. No.	Reasons to enhance the loose coupling
(1)	Client application needs to know only the logical name of the link in advance. Hence, it is not necessary to know the specific URI for calling REST API.
(2)	Since it is not necessary for the client application to know the specific URI, impact on server, owing to change in URI, can be minimized.

Sr. No.	Precautions while extracting a resource
(1)	Resource published on the web is used as the information managed by database. However, data model of the database must not be published as resource as it is, without careful consideration. It should be closely investigated, as the fields stored in the database may include some fields that should not be disclosed to the client.
(2)	When information type is different in spite of being managed by the same table of the database, publishing it as a separate resource may be considered. There are cases wherein, even if essentially seen as different information, it is managed by the same table, due to same data structure. Hence, such cases need to be reviewed closely.
(3)	In RESTful Web Service, the information operated by an event is extracted as a resource. The event itself should not be extracted as a resource. For example, when creating RESTful Web Service to be called from the events (approve, deny, return etc.) generated by work flow functionality, information for managing the workflow status or the workflow itself, is extracted as a resource.

Sr. No.	URI format	Typical example of URI	Description
(1)	/{Noun that represents collection of resources}	/api/v1/members	It is the URI used for batch operations of resources.
(2)	/{Noun that represents collection of resources/resource identifier (ID etc)}	/api/v1/members/M0001	It is the URI used while operating a specific resource.

Sr. No.	URI format	Typical example of URI	Description
(3)	{Resource URI}/{Noun representing collection of related resources}	/api/v1/members/M0001/orders	It is the URI used at the time of batch operation of related resources.
(4)	{Resource URI}/{Noun representing collection of related resources}/{Identifier for related resource (ID etc.)}	/api/v1/members/M0001/orders/O0001	It is the URI used when operating a specific related resource.

Sr. No.	HTTP methods	Overview of the REST API to be implemented
(1)	GET	REST API that fetches collection of resources specified in URI, is implemented.
(2)	POST	REST API that creates and adds the specified resource to the collection is implemented.
(3)	PUT	REST API that performs batch update for resource specified in URI is implemented.
(4)	DELETE	REST API that performs batch deletion for resource specified in URI is implemented.
(5)	HEAD	REST API that fetches meta information of the resource collection specified in URI, is implemented. A process same as GET is performed and only header is sent as response.
(6)	OPTIONS	REST API that responds with the list of HTTP methods (API) supported by resource collection specified in URI, is implemented.

Sr. No.	HTTP methods	Overview of REST API to be implemented
(1)	GET	REST API that fetches the resource specified in URI is implemented.
(2)	PUT	REST API that creates or updates the resource specified in URI is implemented.
(3)	DELETE	REST API that deletes the resource specified in URI is implemented.
(4)	HEAD	A REST API that fetches meta information of the resource specified in URI is implemented. A process same as GET is performed and only header is sent as a response.
(5)	OPTIONS	REST API that responds with list of HTTP methods (API) supported by the resource specified in URI is implemented.

Sr. No.	Objectives
(1)	When the request is successful, an HTTP status code indicating success or transfer (2xx or 3xx system) is sent as response.
(2)	When the cause of request failure lies at client side, an HTTP status code indicating client error (4xx system) is sent as the response. When client is not responsible for request failure however, when the request may be successful through a re-operation by client, it is still considered as client error.
(3)	When the cause of request failure lies at server side, an HTTP status code indicating server error (5xx system) is sent as the response.

Sr. No.	HTTP Status codes	Description	Applicable conditions
(1)	200 OK	HTTP status code notifying that the request was successful.	It is sent as a response when the resource information corresponding to the request is output in the entity body of response, as a result of successful request,
(2)	201 Created	HTTP status code notifying the creation of a new resource.	It is used when a new resource is created using POST method. URI for created resource is set in the Location header of the response.
(3)	204 No Content	HTTP status code notifying a successful request.	It is sent as a response when the resource information corresponding to request is not output in the entity body of response, as a result of successful request.

Sr. No.	HTTP Status code	Description	Applicable conditions
(1)	400 Bad Request	HTTP status code notifying that the request syntax or requested value is incorrect.	It is sent as a response when an incomplete JSON or XML format specified in entity body is detected or an incomplete input value is specified in JSON or XML format or in the request parameters.
(2)	404 Not Found	HTTP status code notifying that the specified resource does not exist.	It is sent as a response when resource corresponding to specified URI does not exist in the system.
(3)	409 Conflict	HTTP status code notifying that the process is terminated due to conflict in resource status when the request status is changed by requested contents.	It is sent as a response when an exclusive error or a business error is detected. Conflict details and error details required to resolve the conflict need to be output to the entity body.

Sr. No.	HTTP Status codes	Description	Applicable conditions
(4)	405 Method Not Allowed	HTTP status code notifying that the used HTTP method is not supported by the specified resource.	It is sent as a response when an unsupported HTTP method is used. The list of allowed methods is set in the Allow header of response.
(5)	406 Not Acceptable	HTTP status code notifying the inability to receive a request, as the resource status cannot be sent as a response in the specified format.	It is sent as a response when, the format specified in extension or Accept header is not supported as a response format.
(6)	415 Unsupported Media Type	HTTP status code notifying that the request cannot be received, as the format specified in entity body is not supported.	It is sent as a response when an unsupported format is specified in Content-Type header, as request format.

Sr. No.	Configuration	Description
(1)	Build an exclusive Web application for RESTful Web Service.	It is recommended to build an exclusive Web application (war) for RESTful Web Service when an independence with client application (UI layer application) that uses RESTful Web Service, is to be ensured (is necessary). This method can be used to create RESTful Web Service when there are multiple client applications using RESTful Web Service.
(2)	Build by providing `DispatcherServlet` for RESTful Web Service.	When it is not necessary to ensure independence of client application (UI layer application) that uses RESTful Web Service, both the client application and RESTful Web Service can be built as a single Web application (war). However, it is strongly recommended to build it by dividing `DispatcherServlet` that receives the requests for RESTful Web Service and `DispatcherServlet` that receives client application requests.

Sr. No.	Description
(1)	When the value defined in the property file needs to be referred by an application layer component, the property file should be read by using `<context:property-placeholder>` element. For the details of fetching a value from property file, refer to “Properties Management”.
(2)	Add the settings for handling the JSON date field format as extended ISO-8601 format. Also, when Joda Time class is to be used as a property of JavaBean which represents a resource (Resource class), “Configuration while using JSR-310 Date and Time API / Joda Time” must be carried out.
(3)	Perform bean registration for the Spring MVC framework component necessary for providing RESTful Web Service. JSON can be used as a resource format by performing these settings. In the above example, resource format is restricted to JSON since the register-defaults attribute of `<mvc:message-converters`> element is set as `false`. To use XML as resource format, `MessageConverter` for XML, that performs the XXE Injection countermeasure, should be specified. For details on designated methods, refer to “Enabling XXE Injection measures” .
(4)	Add the settings to enable page search functionality. For page search details, refer to “Pagination”. This setting is not required if page search is unnecessary, however, it is alright if defined.
(5)	Perform bean registration for Spring MVC interceptor. In the above example, only the `TraceLoggingInterceptor` provided by common library is defined. However, when using JPA as data access, `OpenEntityManagerInViewInterceptor` setting needs to be added separately. Refer to Database Access (JPA) for `OpenEntityManagerInViewInterceptor`.
(6)	Scan the application layer components for RESTful Web Service (Controller or Helper class etc.) and perform bean registration. The `"com.example.project.api"` part is the package name for each project.
(7)	Specify AOP definition to output the exception handled by Spring MVC framework to a log. Refer to Exception Handling for `HandlerExceptionResolverLoggingInterceptor`.

Sr. No.	Description
(1)	Specify a name which shows that it is a RESTful Web Service servlet, in `<servlet-name>` element. In the above example, `"restAppServlet"` is specified as the servlet name.
(2)	Specify a Spring MVC bean definition file used to build `DispatcherServlet` for RESTful Web Service. In the above example, `META-INF/spring/spring-mvc-rest.xml` in class path, is specified as the Spring MVC bean definition file.
(3)	Specify a servlet path pattern to be mapped with the `DispatcherServlet` of RESTful Web Service. In the above example, the servlet path under `"/api/v1/"` is mapped with the `DispatcherServlet` for RESTful Web Service. Typically, servlet paths like `"/api/v1/"` `"/api/v1/members"` `"/api/v1/members/xxxxx"` are mapped in the `DispatcherServlet`(`"restAppServlet"`) for RESTful Web Service.

Sr. No.	Item name	Type	I/O specifications	Number of digits (min-max)	Other specifications
(1)	memberId	String	I/O	10-10	It should be “Unspecified” (NULL) at the time of request for POST Members.
(2)	firstName	String	I/O	1-128	-
(3)	lastName	String	I/O	1-128	-
(4)	genderCode	String (Code)	I/O	1-1	`"0"` : UNKNOWN `"1"` : MEN `"2"` : WOMEN
(5)	dateOfBirth	Date	I/O	-	yyyy-MM-dd format (extended ISO-8601 format)
(6)	emailAddress	String (E-mail)	I/O	1-256	-
(7)	telephoneNumber	String	I/O	0-20	-
(8)	zipCode	String	I/O	0-20	-
(9)	address	String	I/O	0-256	-
(10)	credential	Object (MemberCredential)	I/O	-	It is specified at the time of request for POST Members.
(11)	credential/signId	String (E-mail)	I/O	0-256	emailAddress value is applied when not specified.
(12)	credential/ password	String	I	8-32	-
(13)	credential/ passwordLastChangedAt	Timestamp with time-zone	O	-	yyyy-MM-dd’T’HH:mm:ss.SSS’Z’ format (extended ISO-8601 format)
(14)	credential/ lastModifiedAt	Timestamp with time-zone	O	-	yyyy-MM-dd’T’HH:mm:ss.SSS’Z’format (extended ISO-8601 format)
(15)	createdAt	Timestamp with time-zone	O	-	yyyy-MM-dd’T’HH:mm:ss.SSS’Z’ format (extended ISO-8601 format)
(16)	lastModifiedAt	Timestamp with time-zone	O	-	yyyy-MM-dd’T’HH:mm:ss.SSS’Z’ format (extended ISO-8601 format)

Sr. No.	API name	HTTP Method	Resource path	Status Code	API Overview
(1)	GET Members	GET	`/api/v1/members`	200 (OK)	Page is searched for Member resource that matches the condition.
(2)	POST Members	POST	`/api/v1/members`	201 (Created)	One Member resource is created.
(3)	GET Member	GET	`/api/v1/members/{memberId}`	200 (OK)	One Member resource is fetched.
(4)	PUT Member	PUT	`/api/v1/members/{memberId}`	200 (OK)	One Member resource is updated.
(5)	DELETE Member	DELETE	`/api/v1/members/{memberId}`	204 (No Content)	One Member resource is deleted.

Sr. No.	Roles	Description
(1)	To define the data structure of a resource.	Define a data structure of the resource published on Web. Generally, it is very rare to publish the data structure managed by persistence layer of database etc. as it is, as a resource on Web.
(2)	To define format.	Specify a definition related to resource format using annotation. Annotation to be used differs according to the resource format (JSON/XML etc.). Jackson annotation is used for JSON format whereas JAXB annotation is used for XML format.
(3)	To define input validation rules.	Specify input validation rules for single item of each field by using Bean Validation annotation. For input validation details, refer to “Input Validation” .

Sr. No.	Description
(1)	Create a JavaBean for receiving search conditions. When search conditions are not necessary, JavaBean need not be created.
(2)	Match the property name with the parameter name of request parameter. In the above example, value `"John"` is set in the name property of JavaBean for request `/api/v1/members?name=John`.

Sr. No.	Description
(3)	Specify `RequestMethod.GET` in method attribute of `@RequestMapping` annotation.
(4)	Assign `@org.springframework.web.bind.annotation.ResponseStatus` as method annotation and specify the status code returned as response. Set 200 (OK) in the value attribute of `@ResponseStatus` annotation. Tip How to specify the status code A fixed status code sent as response is specified in this example using `@ResponseStatus` annotation. However, it can also be specified in Controller logic. public ResponseEntity<Page<MemberResource>> getMembers( @Validated MembersSearchQuery query, Pageable pageable) { // omitted return ResponseEntity.ok().body(responseResource); } When it is necessary to change the responding status codes based on process details or process results, `org.springframework.http.ResponseEntity` is used, as shown in the above implementation.
(5)	Specify a JavaBean for receiving search conditions as an argument. When input validation is necessary, assign `@Validated` as argument annotation. For input validation details, refer to “Input Validation”.
(6)	When page search is necessary, specify `org.springframework.data.domain.Pageable` as an argument. For page search details, refer to “Pagination”.
(7)	Call Service method of domain layer and fetch resource information (Entity etc.) matching with the condition. For domain layer implementation, refer to “Domain Layer Implementation”.
(8)	Generate resource object that retains information published on the Web based on the resource information matching with the conditions (Entity etc.). By using `org.springframework.data.domain.PageImpl` class while sending page search result as response, the fields that are necessary as response at the time of page search, can be sent to the client. In the above example, a Resource object is being generated from Entity by using Bean mapping library. For details on Bean mapping library, refer to “Bean Mapping (Dozer)” . When the quantity of code for generating Resource objects is more, it is recommended to create a method for generating Resource object in Helper class.
(9)	Return a Resource object generated in (8). The object returned here is marshalled in JSON or XML and set in response body.

Sr. No.	Description
(11)	Create a file that defines mapping rules for `Member` object and `MemberResource` object. It is recommended to create a mapping definition file of Dozer for each resource. In this implementation, it is stored in `/xxx-web/src/main/resources/META-INF/dozer/memberResource-mapping.xml`.
(12)	In the above example, `password` field is not copied while copying the details of `MemberCredential` which is a related entity of `Member`, to `MemberCredentialResource`, a related resource of `MemberResource`. For Bean mapping definition methods, refer to “Bean Mapping (Dozer)” .

Sr. No.	Description
(1)	Specify `RequestMethod.POST` in the method attribute of `@RequestMapping` annotation.
(2)	Assign `@ResponseStatus` annotation as method annotation and specify responding status code. Set 201(Created) in the value attribute of `@ResponseStatus` annotation.
(3)	Specify JavaBean (Resource class) that receives information of newly created resource as an argument. Assign `@org.springframework.web.bind.annotation.RequestBody` as argument annotation. By assigning `@RequestBody` annotation, JSON or XML data set in request Body is unmarshalled in Resource object. Assign `@Validated` annotation as argument annotation to enable input validation. For details on input validation, refer to “Input Validation” .
(4)	Call Service method of domain layer and create a new resource. For domain layer implementation, refer to “Domain Layer Implementation”.