5.5. Input Validation

Caution

This version is already obsolete. Please check the latest guideline.

Table of Contents

• Input Validation
  • Overview
    • Classification of input validation
  • How to use
    • Adding dependent libraries
    • Single item check
      • Basic single item check
      • Single item check of nested Bean
      • Grouped validation
    • Correlation item check
      • Correlation item check implementation using Spring Validator
      • Implementation of input check of correlated items using Bean Validation
    • Definition of error messages
      • Messages to be defined in ValidationMessages.properties
      • Messages to be defined in application-messages.properties
  • How to extend
    • Creation of Bean Validation annotation by combining existing rules
    • Creation of Bean Validation annotation by implementing new rules
      • Rules that cannot be implemented by combining the existing rules
      • Check rules for correlated items
      • Business logic check
  • Appendix
    • Input validation rules provided by Hibernate Validator
      • Bean Validation check rules
      • Hibernate Validator check rules
    • Default messages provided by Hibernate Validator
    • Type mismatch
    • Binding null to blank string field

5.5.1. Overview

It is mandatory to check whether the value entered by the user is correct. Validation of input value is broadly classified into

1. Validation to determine whether the input value is valid by just looking at it irrespective of the context such as size and format.
2. Validation of whether the changes in input value are valid depending on the system status.

1. is an example of mandatory check and number of digits check and 2. is an example of check of whether EMail is registered and whether order count is within the count of the available stock.

In this section, 1. is explained and this check is called “Input validation”. 2. is called “Business logic check”. For business logic check, refer to Domain Layer Implementation.

In this guideline, validation check should be performed in application layer whereas business logic check should be performed in domain layer.

Input validation of Web application is performed at server side and client side (JavaScript). It is mandatory to check at the Server Side. However, if the same check is performed at the client side also, usability improves since validation results can be analyzed without communicating with the server.

Warning

Input validation should be performed at the server side as the process at client side may be altered using JavaScript. If the validation is performed only at the client side without performing at the server side, the system may be exposed to danger.

Todo

Input validation at client side will be explained later. Only input validation at the server side is mentioned in the first version.

5.5.1.1. Classification of input validation

Input validation is classified into single item check and correlation item check.

Type	Description	Example	Implementation method
Single item check	Check completed in single field	Input mandatory check Digit check Type check	Bean Validation (Hibernate Validator is used as implementation library)
Correlation item check	Check comparing multiple fields	Password and confirm password check	Bean Validation or Validation class implementing org.springframework.validation.Validator interface

Spring supports Bean Validation which is a Java standard. This Bean Validation is used for single item check. Bean Validation or org.springframework.validation.Validator interface provided by Spring is used for correlation item check.

5.5.2. How to use

5.5.2.1. Adding dependent libraries

When Bean validation 1.1 (Hibernate Validator 5.x) or higher version is to be used, in addition to jar file of Hibernate Validator and jar file storing API specifications class (javax.validation package class) of Bean Validation, libraries that store the following classes are required.

• API specifications class of Expression Language 2.2 or higher version (javax.el package class)
• Reference implementation class of Expression Language 2.2 or higher version

If the file is run by deploying on application server, dependent libraries need not be added; since these libraries are provided by application server. However, when it is run in standalone environment (JUnit etc.), these libraries need to be added as dependent libraries.

An example of adding libraries which are required when running Bean Validation 1.1 or higher version in standalone environment is given below.

<!-- (1) -->
<dependency>
    <groupId>org.apache.tomcat.embed</groupId>
    <artifactId>tomcat-embed-el</artifactId>
    <scope>test</scope> <!-- (2) -->
</dependency>

Sr. No.	Description
(1)	Add a library wherein a class for Expression Language is stored, in pom.xml file of the project to be run in standalone environment. In the above example, libraries provided for Apache Tomcat to be embedded are specified. API specifications classes of Expression Language and reference implementation classes are both stored in jar file of tomcat-embed-el.
(2)	When dependent libraries are required to execute JUnit, an appropriate scope is test.

Note

In the above example of settings, it is a prerequisite that version of dependent libraries should be stored in the parent project. Therefore, <version> element is not specified.

5.5.2.2. Single item check

For the implementation of single item check,

• Bean Validation annotation should be assigned to the field of form class
• @Validated annotation should be assigned in Controller for validation
• Tag for displaying validation error message should be added to JSP

Note

<mvc:annotation-driven> settings are carried out in spring-mvc.xml, Bean Validation is enabled.

5.5.2.2.1. Basic single item check

Implementation method is explained using “New user registration” process as an example. Rules for checking “New user registration” form are provided below.

Field name	Type	Rules
name	java.lang.String	Mandatory input Between 1 and 20 characters
email	java.lang.String	Mandatory input Between 1 and 50 characters Email format
age	java.lang.Integer	Mandatory input Between 1 and 200

• Form class

  Assign Bean Validation annotation to each field of form class.

  package com.example.sample.app.validation;
  
  import java.io.Serializable;
  
  import javax.validation.constraints.Max;
  import javax.validation.constraints.Min;
  import javax.validation.constraints.NotNull;
  import javax.validation.constraints.Size;
  
  import org.hibernate.validator.constraints.Email;
  
  public class UserForm implements Serializable {
  
    private static final long serialVersionUID = 1L;
  
    @NotNull // (1)
    @Size(min = 1, max = 20) // (2)
    private String name;
  
    @NotNull
    @Size(min = 1, max = 50)
    @Email // (3)
    private String email;
  
    @NotNull // (4)
    @Min(0) // (5)
    @Max(200) // (6)
    private Integer age;
  
    // omitted setter/getter
  }
  

  Sr. No.	Description
  (1)	Assign javax.validation.constraints.NotNull indicating that the target field is not null. In Spring MVC, when form is sent with input fields left blank, empty string instead of null bindsto form object by default. This @NotNull checks that name exists as request parameter.
  (2)	Assign javax.validation.constraints.Size indicating that the string length (or collection size) of the target field is within the specified size range. Since empty string binds to the field where string is left blank by default in Spring MVC, ‘1 or more character’ rule indicates Mandatory input.
  (3)	Assign org.hibernate.validator.constraints.Email indicating that the target field is in RFC2822-compliant E-mail format. When E-mail format requirements are flexible than RFC2822-compliant constraints, regular expression should be specified using javax.validation.constraints.Pattern instead of @Email.
  (4)	When form is sent without entering any number in input field, null binds to form object so @NotNull indicates mandatory input of age.
  (5)	Assign javax.validation.constraints.Min indicating that the target field value must be greater than the specified value.
  (6)	Assign javax.validation.constraints.Max indicating that the target field value must be less than the specified value.

  Tip

  Refer to Bean Validation check rules and Hibernate Validator check rules for standard annotations of Bean Validation and annotations provided by Hibernate.

  Tip

  Refer to Binding null to blank string field for the method of binding null when input field is left blank.

• Controller class

  Assign @Validated to form class for input validation.

  package com.example.sample.app.validation;
  
  import org.springframework.stereotype.Controller;
  import org.springframework.validation.BindingResult;
  import org.springframework.validation.annotation.Validated;
  import org.springframework.web.bind.annotation.ModelAttribute;
  import org.springframework.web.bind.annotation.RequestMapping;
  import org.springframework.web.bind.annotation.RequestMethod;
  
  @Controller
  @RequestMapping("user")
  public class UserController {
  
    @ModelAttribute
    public UserForm setupForm() {
      return new UserForm();
    }
  
    @RequestMapping(value = "create", method = RequestMethod.GET, params = "form")
    public String createForm() {
      return "user/createForm"; // (1)
    }
  
    @RequestMapping(value = "create", method = RequestMethod.POST, params = "confirm")
    public String createConfirm(@Validated /* (2) */ UserForm form, BindingResult /* (3) */ result) {
      if (result.hasErrors()) { // (4)
        return "user/createForm";
      }
      return "user/createConfirm";
    }
  
    @RequestMapping(value = "create", method = RequestMethod.POST)
    public String create(@Validated UserForm form, BindingResult result) { // (5)
      if (result.hasErrors()) {
        return "user/createForm";
      }
      // omitted business logic
      return "redirect:/user/create?complete";
    }
  
    @RequestMapping(value = "create", method = RequestMethod.GET, params = "complete")
    public String createComplete() {
      return "user/createComplete";
    }
  }
  

  Sr. No.	Description
  (1)	Display “New user registration” form screen.
  (2)	Assign org.springframework.validation.annotation.Validated to the form class argument to perform input validation.
  (3)	Add org.springframework.validation.BindingResult that stores check result of input validation performed in step (2). This BindingResult must be specified immediately after the form argument. When not specified immediately, org.springframework.validation.BindException is thrown.
  (4)	Use BindingResult.hasErrors() method to determine the check result of step (2). When the result of hasErrors() is true, return to form display screen as there is an error in input value.
  (5)	Input validation should be executed againeven at the time of submission on the confirmation screen. There is a possibility of data tempering and hence Input validation must be performed just before entering business logic.

  Note

  @Validated is not a standard Bean Validation annotation. It is an independent annotation provided by Spring. Bean Validation standard javax.validation.Valid annotation can also be used. However, @Validated is better as compared to @Valid annotation. Validation group can be specified in case of @Validated and hence @Validated is recommended in this guideline.

• JSP

When there is input error, it can be displayed in <form:errors> tag.

<!DOCTYPE html>
<html>
<%-- WEB-INF/views/user/createForm.jsp --%>
<body>
    <form:form modelAttribute="userForm" method="post"
        action="${pageContext.request.contextPath}/user/create">
        <form:label path="name">Name:</form:label>
        <form:input path="name" />
        <form:errors path="name" /><%--(1) --%>
        <br>
        <form:label path="email">Email:</form:label>
        <form:input path="email" />
        <form:errors path="email" />
        <br>
        <form:label path="age">Age:</form:label>
        <form:input path="age" />
        <form:errors path="age" />
        <br>
        <form:button name="confirm">Confirm</form:button>
    </form:form>
</body>
</html>

Sr. No.	Description
(1)	Specify target field name in path attribute of <form:errors> tag. Error message is displayed next to input field of each field.

Form is displayed as follows.

Error message is displayed as follows if this form is sent with all the input fields left blank.

Error messages state that Name and Email are blank and Age is null.

Note

In Bean Validation, null is a valid input value except the following annotations.

• javax.validation.constraints.NotNull
• org.hibernate.validator.constraints.NotEmpty
• org.hibernate.validator.constraints.NotBlank

In the above example, error messages related to @Min and @Max annotations are not displayed. This is because null is a valid value for @Min and @Max annotations.

Next, send the form by entering any value in the field.

Error message is not displayed since input value of Name fulfills validation conditions.

Error message is displayed since input value of Email is not in Email format though it fulfills the conditions related to string length.

Error message is displayed since input value of Age exceeds maximum value.

Change the form as follows to change the style at the time of error.

<form:form modelAttribute="userForm" method="post"
    class="form-horizontal"
    action="${pageContext.request.contextPath}/user/create">
    <form:label path="name" cssErrorClass="error-label">Name:</form:label><%-- (1) --%>
    <form:input path="name" cssErrorClass="error-input" /><%-- (2) --%>
    <form:errors path="name" cssClass="error-messages" /><%-- (3) --%>
    <br>
    <form:label path="email" cssErrorClass="error-label">Email:</form:label>
    <form:input path="email" cssErrorClass="error-input" />
    <form:errors path="email" cssClass="error-messages" />
    <br>
    <form:label path="age" cssErrorClass="error-label">Age:</form:label>
    <form:input path="age" cssErrorClass="error-input" />
    <form:errors path="age" cssClass="error-messages" />
    <br>
    <form:button name="confirm">Confirm</form:button>
</form:form>

Sr. No.	Description
(1)	Specify class name for <label> tag in cssErrorClass attribute at the time of error.
(2)	Specify class name for <input> tag in cssErrorClass attribute at the time of error.
(3)	Specify class name for error messages in cssClass attribute.

For example, if the following CSS is applied to this JSP, error screen is displayed as follows.

.form-horizontal input {
    display: block;
    float: left;
}

.form-horizontal label {
    display: block;
    float: left;
    text-align: right;
    float: left;
}

.form-horizontal br {
    clear: left;
}

.error-label {
    color: #b94a48;
}

.error-input {
    border-color: #b94a48;
    margin-left: 5px;
}

.error-messages {
    color: #b94a48;
    display: block;
    padding-left: 5px;
    overflow-x: auto;
}

CSS can be customized as per the requirements of screen.

Instead of displaying the error messages next to each input field, output them collectively.

<form:form modelAttribute="userForm" method="post"
    action="${pageContext.request.contextPath}/user/create">
    <form:errors path="*" element="div" cssClass="error-message-list" /><%-- (1) --%>

    <form:label path="name" cssErrorClass="error-label">Name:</form:label>
    <form:input path="name" cssErrorClass="error-input" />
    <br>
    <form:label path="email" cssErrorClass="error-label">Email:</form:label>
    <form:input path="email" cssErrorClass="error-input" />
    <br>
    <form:label path="age" cssErrorClass="error-label">Age:</form:label>
    <form:input path="age" cssErrorClass="error-input" />
    <br>
    <form:button name="confirm">Confirm</form:button>
</form:form>

Sr. No.	Description
(1)	By specifying * in path attribute of <form:errors> in <form:form> tag, all error messages related to Model specified in modelAttribute attribute of <form:form> can be output. Tag name including these error messages can be specified in element attribute. By default, it is span. However, specify div to output error message list as block element. Specify CSS class in cssClass attribute.

An example of error message is shown when the following CSS class is applied.

.form-horizontal input {
    display: block;
    float: left;
}

.form-horizontal label {
    display: block;
    float: left;
    text-align: right;
    float: left;
}

.form-horizontal br {
    clear: left;
}

.error-label {
    color: #b94a48;
}

.error-input {
    border-color: #b94a48;
    margin-left: 5px;
}

.error-message-list {
    color: #b94a48;
    padding:5px 10px;
    background-color: #fde9f3;
    border:1px solid #c98186;
    border-radius:5px;
    margin-bottom: 10px;
}

By default, field name is not included in error message, hence it is difficult to understand which error message corresponds to which field.

Therefore, when an error message is to be displayed in a list, it is necessary to define the message such that field name is included in the error message.

For method of defining error messages, refer to “Definition of error messages”.

Note

Points to be noted when displaying error messages in a list

Error messages are output in a random order and the output order cannot be controlled by standard function. Therefore, when an output order needs to be controlled (to be kept constant), an extended implementation such as sorting the error information, etc. is required.

In the method of “Displaying error messages in a list”,

• Error message definition in feed unit
• Extended implementation to control the output order of error messages

are required. Therefore, the cost is higher as compared to “displaying error messages next to input field”. This guideline recommends the method of “displaying error messages next to input field” when there are no constraints due to screen requirements.

Further, following method can be considered as extended methods to control output order of error message. Creating inherited class of org.springframework.validation.beanvalidation.LocalValidatorFactoryBean provided by Spring Framework, and sorting error information by overriding processConstraintViolations method, etc.

Note

About @GroupSequence annotation

A mechanism of @GroupSequence annotation is provided to control the check sequence; however, add a note that this mechanism is not to control the output order of error message as operations given below are performed.

• When an error occurs, checking for subsequent groups is not executed.
• If multiple errors (errors in multiple fields) occur in the check of identical groups, then the output order of error messages would be random.

Note

Use <spring:nestedPath> tag to display error messages collectively outside the <form:form> tag.

<spring:nestedPath path="userForm">
    <form:errors path="*" element="div"
        cssClass="error-message-list" />
</spring:nestedPath>
<hr>
<form:form modelAttribute="userForm" method="post"
    action="${pageContext.request.contextPath}/user/create">
    <form:label path="name" cssErrorClass="error-label">Name:</form:label>
    <form:input path="name" cssErrorClass="error-input" />
    <br>
    <form:label path="email" cssErrorClass="error-label">Email:</form:label>
    <form:input path="email" cssErrorClass="error-input" />
    <br>
    <form:label path="age" cssErrorClass="error-label">Age:</form:label>
    <form:input path="age" cssErrorClass="error-input" />
    <br>
    <form:button name="confirm">Confirm</form:button>
</form:form>

5.5.2.2.2. Single item check of nested Bean

The method to validate nested Bean using Bean Validation is explained below.

“Ordering” process of an EC site is considered as an example. Rules for checking “Order” form are provided below.

Field name	Type	Rules	Description
coupon	java.lang.String	5 or less characters Single byte alphanumeric characters	Coupon code
receiverAddress.name	java.lang.String	Mandatory input Between 1 and 50 characters	Receiver name
receiverAddress.postcode	java.lang.String	Mandatory input Between 1 and 10 characters	Receiver postal code
receiverAddress.address	java.lang.String	Mandatory input Between 1 and 100 characters	Receiver address
senderAddress.name	java.lang.String	Mandatory input Between 1 and 50 characters	Sender name
senderAddress.postcode	java.lang.String	Mandatory input Between 1 and 10 characters	Sender postal code
senderAddress.address	java.lang.String	Mandatory input Between 1 and 100 characters	Sender address

Use the same form class since receiverAddress and senderAddress are objects of the same class.

• Form class

  package com.example.sample.app.validation;
  
  import java.io.Serializable;
  
  import javax.validation.Valid;
  import javax.validation.constraints.NotNull;
  import javax.validation.constraints.Pattern;
  import javax.validation.constraints.Size;
  
  public class OrderForm implements Serializable {
      private static final long serialVersionUID = 1L;
  
      @Size(max = 5)
      @Pattern(regexp = "[a-zA-Z0-9]*")
      private String coupon;
  
      @NotNull // (1)
      @Valid // (2)
      private AddressForm receiverAddress;
  
      @NotNull
      @Valid
      private AddressForm senderAddress;
  
      // omitted setter/getter
  }
  

  package com.example.sample.app.validation;
  
  import java.io.Serializable;
  
  import javax.validation.constraints.NotNull;
  import javax.validation.constraints.Size;
  
  public class AddressForm implements Serializable {
      private static final long serialVersionUID = 1L;
  
      @NotNull
      @Size(min = 1, max = 50)
      private String name;
  
      @NotNull
      @Size(min = 1, max = 10)
      private String postcode;
  
      @NotNull
      @Size(min = 1, max = 100)
      private String address;
  
      // omitted setter/getter
  }
  

  Sr. No.	Description
  (1)	This indicates that the child form is mandatory. When not set, it will be considered as valid even if null is set in receiverAddress.
  (2)	Assign javax.validation.Valid annotation to enable Bean Validation of the nested Bean.

• Controller class

  It is not different from the Controller described earlier.

  package com.example.sample.app.validation;
  
  import org.springframework.stereotype.Controller;
  import org.springframework.validation.BindingResult;
  import org.springframework.validation.annotation.Validated;
  import org.springframework.web.bind.annotation.ModelAttribute;
  import org.springframework.web.bind.annotation.RequestMapping;
  import org.springframework.web.bind.annotation.RequestMethod;
  
  @RequestMapping("order")
  @Controller
  public class OrderController {
  
      @ModelAttribute
      public OrderForm setupForm() {
          return new OrderForm();
      }
  
      @RequestMapping(value = "order", method = RequestMethod.GET, params = "form")
      public String orderForm() {
          return "order/orderForm";
      }
  
      @RequestMapping(value = "order", method = RequestMethod.POST, params = "confirm")
      public String orderConfirm(@Validated OrderForm form, BindingResult result) {
          if (result.hasErrors()) {
              return "order/orderForm";
          }
          return "order/orderConfirm";
      }
  }
  

• JSP

  <!DOCTYPE html>
  <html>
  <%-- WEB-INF/views/order/orderForm.jsp --%>
  <head>
  <style type="text/css">
    /* omitted (same as previous sample) */
  </style>
  </head>
  <body>
      <form:form modelAttribute="orderForm" method="post"
          class="form-horizontal"
          action="${pageContext.request.contextPath}/order/order">
          <form:label path="coupon" cssErrorClass="error-label">Coupon Code:</form:label>
          <form:input path="coupon" cssErrorClass="error-input" />
          <form:errors path="coupon" cssClass="error-messages" />
          <br>
      <fieldset>
          <legend>Receiver</legend>
          <%-- (1) --%>
          <form:errors path="receiverAddress"
              cssClass="error-messages" />
          <%-- (2) --%>
          <form:label path="receiverAddress.name"
              cssErrorClass="error-label">Name:</form:label>
          <form:input path="receiverAddress.name"
              cssErrorClass="error-input" />
          <form:errors path="receiverAddress.name"
              cssClass="error-messages" />
          <br>
          <form:label path="receiverAddress.postcode"
              cssErrorClass="error-label">Postcode:</form:label>
          <form:input path="receiverAddress.postcode"
              cssErrorClass="error-input" />
          <form:errors path="receiverAddress.postcode"
              cssClass="error-messages" />
          <br>
          <form:label path="receiverAddress.address"
              cssErrorClass="error-label">Address:</form:label>
          <form:input path="receiverAddress.address"
              cssErrorClass="error-input" />
          <form:errors path="receiverAddress.address"
              cssClass="error-messages" />
      </fieldset>
      <br>
      <fieldset>
          <legend>Sender</legend>
          <form:errors path="senderAddress"
              cssClass="error-messages" />
          <form:label path="senderAddress.name"
              cssErrorClass="error-label">Name:</form:label>
          <form:input path="senderAddress.name"
              cssErrorClass="error-input" />
          <form:errors path="senderAddress.name"
              cssClass="error-messages" />
          <br>
          <form:label path="senderAddress.postcode"
              cssErrorClass="error-label">Postcode:</form:label>
          <form:input path="senderAddress.postcode"
              cssErrorClass="error-input" />
          <form:errors path="senderAddress.postcode"
              cssClass="error-messages" />
          <br>
          <form:label path="senderAddress.address"
              cssErrorClass="error-label">Address:</form:label>
          <form:input path="senderAddress.address"
              cssErrorClass="error-input" />
          <form:errors path="senderAddress.address"
              cssClass="error-messages" />
      </fieldset>
  
          <form:button name="confirm">Confirm</form:button>
      </form:form>
  </body>
  </html>
  

  Sr. No.	Description
  (1)	When receiverAddress.name, receiverAddress.postcode, receiverAddress.address are not sent as request parameters due to invalid operation, receiverAddress is considered as null and error message is displayed.
  (2)	Fields of nested bean are specified as [parent field name].[child field name].

Form is displayed as follows.

Error message is displayed as follows if this form is sent with all the input fields left blank.

Validation of nested bean is enabled for collections also.

Add a field such that up to 3 addresses can be registered in “user registration” form explained at the beginning.

• Add list of AddressForm as a field in the form class.

  package com.example.sample.app.validation;
  
  import java.io.Serializable;
  import java.util.List;
  
  import javax.validation.Valid;
  import javax.validation.constraints.Max;
  import javax.validation.constraints.Min;
  import javax.validation.constraints.NotNull;
  import javax.validation.constraints.Size;
  
  import org.hibernate.validator.constraints.Email;
  
  public class UserForm implements Serializable {
  
      private static final long serialVersionUID = 1L;
  
      @NotNull
      @Size(min = 1, max = 20)
      private String name;
  
      @NotNull
      @Size(min = 1, max = 50)
      @Email
      private String email;
  
      @NotNull
      @Min(0)
      @Max(200)
      private Integer age;
  
      @NotNull
      @Size(min = 1, max = 3) // (1)
      @Valid
      private List<AddressForm> addresses;
  
      // omitted setter/getter
  }
  

  Sr. No.	Description
  (1)	It is possible to use @Size annotation for checking size of collection as well.

• JSP

  <!DOCTYPE html>
  <html>
  <%-- WEB-INF/views/user/createForm.jsp --%>
  <head>
  <style type="text/css">
    /* omitted (same as previous sample) */
  </style>
  </head>
  <body>
  
      <form:form modelAttribute="userForm" method="post"
          class="form-horizontal"
          action="${pageContext.request.contextPath}/user/create">
          <form:label path="name" cssErrorClass="error-label">Name:</form:label>
          <form:input path="name" cssErrorClass="error-input" />
          <form:errors path="name" cssClass="error-messages" />
          <br>
          <form:label path="email" cssErrorClass="error-label">Email:</form:label>
          <form:input path="email" cssErrorClass="error-input" />
          <form:errors path="email" cssClass="error-messages" />
          <br>
          <form:label path="age" cssErrorClass="error-label">Age:</form:label>
          <form:input path="age" cssErrorClass="error-input" />
          <form:errors path="age" cssClass="error-messages" />
          <br>
          <form:errors path="addresses" cssClass="error-messages" /><%-- (1) --%>
          <c:forEach items="${userForm.addresses}" varStatus="status"><%-- (2) --%>
              <fieldset class="address">
                  <legend>Address${f:h(status.index + 1)}</legend>
                  <form:label path="addresses[${status.index}].name"
                      cssErrorClass="error-label">Name:</form:label><%-- (3) --%>
                  <form:input path="addresses[${status.index}].name"
                      cssErrorClass="error-input" />
                  <form:errors path="addresses[${status.index}].name"
                      cssClass="error-messages" />
                  <br>
                  <form:label path="addresses[${status.index}].postcode"
                      cssErrorClass="error-label">Postcode:</form:label>
                  <form:input path="addresses[${status.index}].postcode"
                      cssErrorClass="error-input" />
                  <form:errors path="addresses[${status.index}].postcode"
                      cssClass="error-messages" />
                  <br>
                  <form:label path="addresses[${status.index}].address"
                      cssErrorClass="error-label">Address:</form:label>
                  <form:input path="addresses[${status.index}].address"
                      cssErrorClass="error-input" />
                  <form:errors path="addresses[${status.index}].address"
                      cssClass="error-messages" />
                  <c:if test="${status.index > 0}">
                      <br>
                      <button class="remove-address-button">Remove</button>
                  </c:if>
              </fieldset>
              <br>
          </c:forEach>
          <button id="add-address-button">Add address</button>
          <br>
          <form:button name="confirm">Confirm</form:button>
      </form:form>
      <script type="text/javascript"
          src="${pageContext.request.contextPath}/resources/vendor/js/jquery-1.10.2.min.js"></script>
      <script type="text/javascript"
          src="${pageContext.request.contextPath}/resources/app/js/AddressesView.js"></script>
  </body>
  </html>
  

  Sr. No.	Description
  (1)	Display error message related to address field.
  (2)	Process the collection of child forms in a loop using <c:forEach> tag.
  (3)	Inside the loop, Specify the field of child form using [parent field name][Index].[child field name].

• Controller class

  package com.example.sample.app.validation;
  
  import java.util.ArrayList;
  import java.util.List;
  
  import org.springframework.stereotype.Controller;
  import org.springframework.validation.BindingResult;
  import org.springframework.validation.annotation.Validated;
  import org.springframework.web.bind.annotation.ModelAttribute;
  import org.springframework.web.bind.annotation.RequestMapping;
  import org.springframework.web.bind.annotation.RequestMethod;
  
  @Controller
  @RequestMapping("user")
  public class UserController {
  
      @ModelAttribute
      public UserForm setupForm() {
          UserForm form = new UserForm();
          List<AddressForm> addresses = new ArrayList<AddressForm>();
          addresses.add(new AddressForm());
          form.setAddresses(addresses); // (1)
          return form;
      }
  
      @RequestMapping(value = "create", method = RequestMethod.GET, params = "form")
      public String createForm() {
          return "user/createForm";
      }
  
      @RequestMapping(value = "create", method = RequestMethod.POST, params = "confirm")
      public String createConfirm(@Validated UserForm form, BindingResult result) {
          if (result.hasErrors()) {
              return "user/createForm";
          }
          return "user/createConfirm";
      }
  }
  

  Sr. No.	Description
  (1)	Edit the form object to display a single address form at the time of initial display of “user registration” form.

• JavaScript

  Below is the JavaScript to dynamically add address input field. However, the explanation of this code is omitted as it is not required.

  // webapp/resources/app/js/AddressesView.js
  
  function AddressesView() {
    this.addressSize = $('fieldset.address').size();
  };
  
  AddressesView.prototype.addAddress = function() {
    var $address = $('fieldset.address');
    var newHtml = addressTemplate(this.addressSize++);
    $address.last().next().after($(newHtml));
  };
  
  AddressesView.prototype.removeAddress = function($fieldset) {
    $fieldset.next().remove(); // remove <br>
    $fieldset.remove(); // remove <fieldset>
  };
  
  function addressTemplate(number) {
    return '\
  <fieldset class="address">\
      <legend>Address' + (number + 1) + '</legend>\
      <label for="addresses' + number + '.name">Name:</label>\
      <input id="addresses' + number + '.name" name="addresses[' + number + '].name" type="text" value=""/><br>\
      <label for="addresses' + number + '.postcode">Postcode:</label>\
      <input id="addresses' + number + '.postcode" name="addresses[' + number + '].postcode" type="text" value=""/><br>\
      <label for="addresses' + number + '.address">Address:</label>\
      <input id="addresses' + number + '.address" name="addresses[' + number + '].address" type="text" value=""/><br>\
      <button class="remove-address-button">Remove</button>\
  </fieldset>\
  <br>\
  ';
  }
  
  $(function() {
    var addressesView = new AddressesView();
  
    $('#add-address-button').on('click', function(e) {
      e.preventDefault();
      addressesView.addAddress();
    });
  
    $(document).on('click', '.remove-address-button', function(e) {
      if (this === e.target) {
        e.preventDefault();
        var $this = $(this); // this button
        var $fieldset = $this.parent(); // fieldset
        addressesView.removeAddress($fieldset);
      }
    });
  
  });
  

Form is displayed as follows.

Add 2 address forms by clicking “Add address” button twice.

Error message is displayed as follows if this form is sent with all the input fields left blank.

5.5.2.2.3. Grouped validation

By creating validation group, input validation rules for a field can be specified for each group.

In the “new user registration” example, add “Must be an adult” rule for the age field. Add country field also as “Adult” rules differ with country.

To specify group in Bean Validation, set any java.lang.Class object representing a group in group attribute of the annotation.

Create the following 3 groups (interface) here.

Group	Adult condition
Chinese	18 years or more
Japanese	20 years or more
Singaporean	21 years or more

An example of executing validation using these groups is shown here.

• Form class

  package com.example.sample.app.validation;
  
  import java.io.Serializable;
  import java.util.List;
  
  import javax.validation.Valid;
  import javax.validation.constraints.Max;
  import javax.validation.constraints.Min;
  import javax.validation.constraints.NotNull;
  import javax.validation.constraints.Size;
  
  import org.hibernate.validator.constraints.Email;
  
  public class UserForm implements Serializable {
  
      private static final long serialVersionUID = 1L;
  
      // (1)
      public static interface Chinese {
      };
  
      public static interface Japanese {
      };
  
      public static interface Singaporean {
      };
  
      @NotNull
      @Size(min = 1, max = 20)
      private String name;
  
      @NotNull
      @Size(min = 1, max = 50)
      @Email
      private String email;
  
      @NotNull
      @Min.List({ // (2)
              @Min(value = 18, groups = Chinese.class), // (3)
              @Min(value = 20, groups = Japanese.class),
              @Min(value = 21, groups = Singaporean.class)
              })
      @Max(200)
      private Integer age;
  
      @NotNull
      @Size(min = 2, max = 2)
      private String country; // (4)
  
      // omitted setter/getter
  }
  

  Sr. No.	Description
  (1)	Define each group as an interface.
  (2)	@Min.List annotation is used to specify multiple @Min rules on a single field. It is same even while using other annotations.
  (3)	Specify corresponding group class in the group attribute, in order to define rules for each group. When group attribute is not specified, javax.validation.groups.Default group is used.
  (4)	Add a field which will be used to determine which group is to be applied.

• JSP

  There are no major changes in JSP.

  <form:form modelAttribute="userForm" method="post"
      class="form-horizontal"
      action="${pageContext.request.contextPath}/user/create">
      <form:label path="name" cssErrorClass="error-label">Name:</form:label>
      <form:input path="name" cssErrorClass="error-input" />
      <form:errors path="name" cssClass="error-messages" />
      <br>
      <form:label path="email" cssErrorClass="error-label">Email:</form:label>
      <form:input path="email" cssErrorClass="error-input" />
      <form:errors path="email" cssClass="error-messages" />
      <br>
      <form:label path="age" cssErrorClass="error-label">Age:</form:label>
      <form:input path="age" cssErrorClass="error-input" />
      <form:errors path="age" cssClass="error-messages" />
      <br>
      <form:label path="country" cssErrorClass="error-label">Country:</form:label>
      <form:select path="country" cssErrorClass="error-input">
          <form:option value="cn">China</form:option>
          <form:option value="jp">Japan</form:option>
          <form:option value="sg">Singapore</form:option>
      </form:select>
      <form:errors path="country" cssClass="error-messages" />
      <br>
      <form:button name="confirm">Confirm</form:button>
  </form:form>
  

• Controller class

By giving a group name to @Validated annotation, the rules defined for that group will be applied.

package com.example.sample.app.validation;


import javax.validation.groups.Default;

import org.springframework.stereotype.Controller;
import org.springframework.validation.BindingResult;
import org.springframework.validation.annotation.Validated;
import org.springframework.web.bind.annotation.ModelAttribute;
import org.springframework.web.bind.annotation.RequestMapping;
import org.springframework.web.bind.annotation.RequestMethod;

import com.example.sample.app.validation.UserForm.Chinese;
import com.example.sample.app.validation.UserForm.Japanese;
import com.example.sample.app.validation.UserForm.Singaporean;

@Controller
@RequestMapping("user")
public class UserController {

    @ModelAttribute
    public UserForm setupForm() {
        UserForm form = new UserForm();
        return form;
    }

    @RequestMapping(value = "create", method = RequestMethod.GET, params = "form")
    public String createForm() {
        return "user/createForm";
    }

    String createConfirm(UserForm form, BindingResult result) {
        if (result.hasErrors()) {
            return "user/createForm";
        }
        return "user/createConfirm";
    }

    @RequestMapping(value = "create", method = RequestMethod.POST, params = {
            "confirm",  /* (1) */ "country=cn" })
    public String createConfirmForChinese(@Validated({ /* (2) */ Chinese.class,
            Default.class }) UserForm form, BindingResult result) {
        return createConfirm(form, result);
    }

    @RequestMapping(value = "create", method = RequestMethod.POST, params = {
            "confirm", "country=jp" })
    public String createConfirmForJapanese(@Validated({ Japanese.class,
            Default.class }) UserForm form, BindingResult result) {
        return createConfirm(form, result);
    }

    @RequestMapping(value = "create", method = RequestMethod.POST, params = {
            "confirm", "country=sg" })
    public String createConfirmForSingaporean(@Validated({ Singaporean.class,
            Default.class }) UserForm form, BindingResult result) {
        return createConfirm(form, result);
    }
}

Sr. No.	Description
(1)	The parameter which is used as condition to dividing between the groups must be set to param attribute.
(2)	All the annotations, except @Min of age field, belongs to Default group; hence, specifying Default is mandatory.

In this example, the check result of the combination of each input value is as follows.

age value	country value	Input validation result	Error message
17	cn	NG	must be greater than or equal to 18
	jp	NG	must be greater than or equal to 20
	sg	NG	must be greater than or equal to 21
18	cn	OK
	jp	NG	must be greater than or equal to 20
	sg	NG	must be greater than or equal to 21
20	cn	OK
	jp	OK
	sg	NG	must be greater than or equal to 21
21	cn	OK
	jp	OK
	sg	OK

Warning

Implementation of this Controller is inadequate; there is no handling when country value is neither “cn”, “jp” nor “sg”. 400 error is returned when unexpected country value is encountered.

Next, we can think of a condition where the number of countries increase and adult condition of 18 years or more is be set as a default rule.

Rules are as follows.

Group	Adult condition
Japanese	20 years or more
Singaporean	21 years or more
Country other than the above-mentioned(Default)	18 years or more

• Form class

  In order to specify a value to Default group (18 years or more), all groups should be specified explicitly in other annotations as well.

  package com.example.sample.app.validation;
  
  import java.io.Serializable;
  import java.util.List;
  
  import javax.validation.Valid;
  import javax.validation.constraints.Max;
  import javax.validation.constraints.Min;
  import javax.validation.constraints.NotNull;
  import javax.validation.constraints.Size;
  import javax.validation.groups.Default;
  
  import org.hibernate.validator.constraints.Email;
  
  public class UserForm implements Serializable {
  
      private static final long serialVersionUID = 1L;
  
      public static interface Japanese {
      };
  
      public static interface Singaporean {
      };
  
      @NotNull(groups = { Default.class, Japanese.class, Singaporean.class }) // (1)
      @Size(min = 1, max = 20, groups = { Default.class, Japanese.class,
              Singaporean.class })
      private String name;
  
      @NotNull(groups = { Default.class, Japanese.class, Singaporean.class })
      @Size(min = 1, max = 50, groups = { Default.class, Japanese.class,
              Singaporean.class })
      @Email(groups = { Default.class, Japanese.class, Singaporean.class })
      private String email;
  
      @NotNull(groups = { Default.class, Japanese.class, Singaporean.class })
      @Min.List({
              @Min(value = 18, groups = Default.class), // (2)
              @Min(value = 20, groups = Japanese.class),
              @Min(value = 21, groups = Singaporean.class) })
      @Max(200)
      private Integer age;
  
      @NotNull(groups = { Default.class, Japanese.class, Singaporean.class })
      @Size(min = 2, max = 2, groups = { Default.class, Japanese.class,
              Singaporean.class })
      private String country;
  
      // omitted setter/getter
  }
  

  Sr. No.	Description
  (1)	Set all groups to annotations other than @Min of age field as well.
  (2)	Set the rule for Default group.

• JSP

  No change in JSP

• Controller class

  package com.example.sample.app.validation;
  
  import org.springframework.stereotype.Controller;
  import org.springframework.validation.BindingResult;
  import org.springframework.validation.annotation.Validated;
  import org.springframework.web.bind.annotation.ModelAttribute;
  import org.springframework.web.bind.annotation.RequestMapping;
  import org.springframework.web.bind.annotation.RequestMethod;
  
  import com.example.sample.app.validation.UserForm.Japanese;
  import com.example.sample.app.validation.UserForm.Singaporean;
  
  @Controller
  @RequestMapping("user")
  public class UserController {
  
      @ModelAttribute
      public UserForm setupForm() {
          UserForm form = new UserForm();
          return form;
      }
  
      @RequestMapping(value = "create", method = RequestMethod.GET, params = "form")
      public String createForm() {
          return "user/createForm";
      }
  
      String createConfirm(UserForm form, BindingResult result) {
          if (result.hasErrors()) {
              return "user/createForm";
          }
          return "user/createConfirm";
      }
  
      @RequestMapping(value = "create", method = RequestMethod.POST, params = { "confirm" })
      public String createConfirmForDefault(@Validated /* (1) */ UserForm form,
              BindingResult result) {
          return createConfirm(form, result);
      }
  
      @RequestMapping(value = "create", method = RequestMethod.POST, params = {
              "confirm", "country=jp" })
      public String createConfirmForJapanese(
              @Validated(Japanese.class)  /* (2) */ UserForm form, BindingResult result) {
          return createConfirm(form, result);
      }
  
      @RequestMapping(value = "create", method = RequestMethod.POST, params = {
              "confirm", "country=sg" })
      public String createConfirmForSingaporean(
              @Validated(Singaporean.class) UserForm form, BindingResult result) {
          return createConfirm(form, result);
      }
  }
  

  Sr. No.	Description
  (1)	When the field country does not have a value, the request is mapped to a method in which Default group is specified in @Validated annotation.
  (2)	When the field country has a value, the request is mapped to a method in which Default group is not included in @Validated annotation.

Till now, 2 patterns of using grouped validation have been explained.

In the previous pattern, Default group is used in Controller class and in the later one, Default group is used in form class.

Pattern	Advantages	Disadvantages	Decision points
Using Default group in Controller class	group attribute need not be set for the rules that need not be grouped.	Since all patterns of group should be defined, it is difficult to define when there are many group patterns.	Should be used when there are only a limited number of group patterns (New create group, Update group and Delete group)
Using Default group in form class	Since only the groups that do not belong to the default group need to be defined, it can be handled even if there are many patterns.	group attribute should be set for the rules that need not be grouped making the process complicated.	Should be used when there are many group patterns and majority of patterns have a common value.

If none of the above decision points are applicable, then using Bean Validation itself might not be a good idea.After reviewing the design, usage of Spring Validator or implementation of validation in business logic should be considered.

Note

In the examples explained so far, the switching of group validation is carried out using request parameter and parameter that can be specified in @RequestMapping annotation. It is not possible to switch between groups, if switching is to be performed based on permissions in authentication object or any information which cannot be handled by @RequestMapping annotation.

In such a case, @Validated annotation must not be used but org.springframework.validation.SmartValidator must be used. Group validation can be performed inside the handler method of controller.

@Controller
@RequestMapping("user")
public class UserController {

    @Inject
    SmartValidator smartValidator; // (1)

    // omitted

    @RequestMapping(value = "create", method = RequestMethod.POST, params = "confirm")
    public String createConfirm(/* (2) */ UserForm form, BindingResult result) {
        // (3)
        Class<?> validationGroup = Default.class;
        // logic to determine validation group
        // if (xxx) {
        //     validationGroup = Xxx.class;
        // }
        smartValidator.validate(form, result, validationGroup); // (4)
        if (result.hasErrors()) {
            return "user/createForm";
        }
        return "user/createConfirm";
    }

}

Sr. No.	Description
(1)	Inject SmartValidator. Since SmartValidator can be used if <mvc:annotation-driven> setting is carried out so there is no need to define separately.
(2)	Do not use @Validated annotation.
(3)	Determine a validation group. Logic to determine a validation group recommends delegating to Helper class and keeping logic in Controller in simple state.
(4)	Execute grouped validation using validate method of SmartValidator. Multiple groups can be specified in validate method.

Since logic should not be written in Controller, if switching is possible using request parameters in @RequestMappingannotation, SmartValidator must not be used.

5.5.2.3. Correlation item check

For the validation of correlated items, Spring Validator(Validator implementing org.springframework.validation.Validator interface) or Bean Validation must be used.

Each one of above has been explained below. However, before that, their features and usage have been explained.

Format	Features	Usage
Spring Validator	It is easy to create input validation for a particular class. It is inconvenient to use in Controller.	Input validation implementation of unique business requirements depending on specific form
Bean Validation	Creation of input validation is not as easy as Spring Validator. It is easy to use in Controller.	Common input validation implementation of development project not depending on specific form

5.5.2.3.1. Correlation item check implementation using Spring Validator

Implementation method is explained with the help of “reset password” process as an example.

Implement the following rules. Following rules are provided in the “reset password” form.

Field name	Type	Rules	Description
password	java.lang.String	Mandatory input 8 or more characters Must be same as confirmPassword	Password
confirmPassword	java.lang.String	Nothing in particular	Confirm password

Check rule “Must be same as confirmPassword” is validation of correlated items as password field and passwordConfirm field should have the same value.

• Form class

  other than validation of correlated items, implement using Bean Validation annotation.

  package com.example.sample.app.validation;
  
  import java.io.Serializable;
  
  import javax.validation.constraints.NotNull;
  import javax.validation.constraints.Size;
  
  public class PasswordResetForm implements Serializable {
      private static final long serialVersionUID = 1L;
  
      @NotNull
      @Size(min = 8)
      private String password;
  
      private String confirmPassword;
  
      // omitted setter/getter
  }
  

  Note

  Password is normally saved in database after hashing it, hence there is no need to check the maximum number of characters.

• Validator class

  Implement validation of correlated items using org.springframework.validation.Validator interface.

  package com.example.sample.app.validation;
  
  import org.springframework.stereotype.Component;
  import org.springframework.validation.Errors;
  import org.springframework.validation.Validator;
  
  @Component // (1)
  public class PasswordEqualsValidator implements Validator {
  
      @Override
      public boolean supports(Class<?> clazz) {
          return PasswordResetForm.class.isAssignableFrom(clazz); // (2)
      }
  
      @Override
      public void validate(Object target, Errors errors) {
  
          if (errors.hasFieldErrors("password")) { // (3)
              return;
          }
  
          PasswordResetForm form = (PasswordResetForm) target;
          String password = form.getPassword();
          String confirmPassword = form.getConfirmPassword();
  
          if (!password.equals(confirmPassword)) { // (4)
              errors.rejectValue(/* (5) */ "password",
              /* (6) */ "PasswordEqualsValidator.passwordResetForm.password",
              /* (7) */ "password and confirm password must be same.");
          }
      }
  }
  

  Sr. No.	Description
  (1)	Assign @Component to make Validator the target of component scan.
  (2)	Decide the argument is check target of this validator or not. Here PasswordResetForm class is the target to be checked.
  (3)	If an error occurs at the target fields during a single item check, do not perform correlation check in this Validator. If it is necessary to perform the correlation check, this determination logic is not required.
  (4)	Implement check logic.
  (5)	Specify field name where there is error.
  (6)	Specify code name of error message. Here, code is “[validator name].[form attribute name].[property name]” Refer to Messages to be defined in application-messages.properties for mesaage definition.
  (7)	Set default message to be used when error message does not get resolved using code.

  Note

  Spring Validator implementation class should be placed in the same package as the Controller.

• Controller class

  package com.example.sample.app.validation;
  
  import javax.inject.Inject;
  
  import org.springframework.stereotype.Controller;
  import org.springframework.validation.BindingResult;
  import org.springframework.validation.annotation.Validated;
  import org.springframework.web.bind.WebDataBinder;
  import org.springframework.web.bind.annotation.InitBinder;
  import org.springframework.web.bind.annotation.ModelAttribute;
  import org.springframework.web.bind.annotation.RequestMapping;
  import org.springframework.web.bind.annotation.RequestMethod;
  
  @Controller
  @RequestMapping("password")
  public class PasswordResetController {
      @Inject
      PasswordEqualsValidator passwordEqualsValidator; // (1)
  
      @ModelAttribute
      public PasswordResetForm setupForm() {
          return new PasswordResetForm();
      }
  
      @InitBinder
      public void initBinder(WebDataBinder binder) {
          binder.addValidators(passwordEqualsValidator); // (2)
      }
  
      @RequestMapping(value = "reset", method = RequestMethod.GET, params = "form")
      public String resetForm() {
          return "password/resetForm";
      }
  
      @RequestMapping(value = "reset", method = RequestMethod.POST)
      public String reset(@Validated PasswordResetForm form, BindingResult result) { // (3)
          if (result.hasErrors()) {
              return "password/resetForm";
          }
          return "redirect:/password/reset?complete";
      }
  
      @RequestMapping(value = "reset", method = RequestMethod.GET, params = "complete")
      public String resetComplete() {
          return "password/resetComplete";
      }
  }
  

  Sr. No.	Description
  (1)	Inject Spring Validator to be used.
  (2)	In the method having @InitBinder annotation, add Validators using WebDataBinder.addValidators method. By this, the added Validator is called when validation is executed with the use of @Validated annotation.
  (3)	Implement input validation as per the process performed so far.

• JSP

  There are no points to mention for JSP.

  <!DOCTYPE html>
  <html>
  <%-- WEB-INF/views/password/resetForm.jsp --%>
  <head>
  <style type="text/css">
  /* omitted */
  </style>
  </head>
  <body>
      <form:form modelAttribute="passwordResetForm" method="post"
          class="form-horizontal"
          action="${pageContext.request.contextPath}/password/reset">
          <form:label path="password" cssErrorClass="error-label">Password:</form:label>
          <form:password path="password" cssErrorClass="error-input" />
          <form:errors path="password" cssClass="error-messages" />
          <br>
          <form:label path="confirmPassword" cssErrorClass="error-label">Password (Confirm):</form:label>
          <form:password path="confirmPassword"
              cssErrorClass="error-input" />
          <form:errors path="confirmPassword" cssClass="error-messages" />
          <br>
          <form:button>Reset</form:button>
      </form:form>
  </body>
  </html>
  

Error message as shown below is displayed when form is sent by entering different values in password field and confirmPassword fields.

Note

When <form:password> tag is used, data gets cleared at the time of redisplay.

Note

When multiple forms are used in a single controller, model name should be specified in @InitBinder("xxx") in order to limit the target of Validator.

@Controller
@RequestMapping("xxx")
public class XxxController {
    // omitted
    @ModelAttribute("aaa")
    public AaaForm() {
        return new AaaForm();
    }

    @ModelAttribute("bbb")
    public BbbForm() {
        return new BbbForm();
    }

    @InitBinder("aaa")
    public void initBinderForAaa(WebDataBinder binder) {
        // add validators for AaaForm
        binder.addValidators(aaaValidator);
    }

    @InitBinder("bbb")
    public void initBinderForBbb(WebDataBinder binder) {
        // add validators for BbbForm
        binder.addValidators(bbbValidator);
    }
    // omitted
}

Note

To change the check contents of correlated items check rules in accordance with a validation group (for example: To implement correlated items check only when specific validation group is specified, etc.), it is better to switch the process within validate method by implementing org.springframework.validation.SmartValidator interface instead of implementing org.springframework.validation.Validator interface.

package com.example.sample.app.validation;

import org.apache.commons.lang3.ArrayUtils;
import org.springframework.stereotype.Component;
import org.springframework.validation.Errors;
import org.springframework.validation.SmartValidator;

@Component
public class PasswordEqualsValidator implements SmartValidator { // Implements SmartValidator instead of Validator interface

    @Override
    public boolean supports(Class<?> clazz) {
        return PasswordResetForm.class.isAssignableFrom(clazz);
    }

    @Override
    public void validate(Object target, Errors errors) {
        validate(target, errors, new Object[] {});
    }

    @Override
    public void validate(Object target, Errors errors, Object... validationHints) {
        // Check validationHints(groups) and apply validation logic only when 'Update.class' is specified
        if (ArrayUtils.contains(validationHints, Update.class)) {
            PasswordResetForm form = (PasswordResetForm) target;
            String password = form.getPassword();
            String confirmPassword = form.getConfirmPassword();

            // omitted...
        }
    }
}

5.5.2.3.2. Implementation of input check of correlated items using Bean Validation

Independent validation rules should be added to implement validation of correlated items using Bean Validation.

It is explained in How to extend.

5.5.2.4. Definition of error messages

Method to change error messages of input validation is explained.

Error messages of Bean Validation in Spring MVC are resolved in the following order.

1. If there is any message which matches with the rule, among the messages defined in org.springframework.context.MessageSource, then it is to be used as error message (Spring rule).

   For default rules of Spring, refer to “JavaDoc of DefaultMessageCodesResolver”.

2. If message cannot be found as mentioned in step 1, then error message is acquired from the message attribute of the annotation. (Bean Validation rule)

1. When the value of message attribute is not in “{message key}” format, use that text as error message.
2. When the value of message attribute is in “{message key}” format, search messages corresponding to message key from ValidationMessages.properties under classpath.

1. When message corresponding to message key is defined, use that message
2. When message corresponding to message key is not defined, use “{message key}” as error message

Basically, it is recommended to define error messages in properties file.

Messages should be defined at following places.

• properties file read by org.springframework.context.MessageSource
• ValidationMessages.properties under classpath

Considering that the following settings are done in applicationContext.xml, former is called as “application-messages.properties” and latter is called “ValidationMessages.properties”.

<bean id="messageSource"
    class="org.springframework.context.support.ResourceBundleMessageSource">
    <property name="basenames">
        <list>
            <value>i18n/application-messages</value>
        </list>
    </property>
</bean>

Warning

Multiple ValidationMessages.properties files should not exist directly under class path.

If multiple ValidationMessages.properties files exist directly under class path, an appropriate message may not be displayed, as either one file of them is read leaving rest of the files unread.

• When adopting multi project structure, please take care so that ValidationMessages.properties file is not placed in multiple projects.
• When distributing common parts for Bean Validation as jar file, please take care so that ValidationMessages.properties file is not included in jar file.

Further, when a project is created from Blank project of version 1.0.2.RELEASE or higher, ValidationMessages.properties is stored directly under xxx-web/src/main/resources.

This guideline classifies the definition as follows.

Properties file name	Contents to be defined
ValidationMessages.properties	Default error messages of Bean Validation specified by the system
application-messages.properties	Error message of Bean Validation to be overwritten separately Error message of input validation implemented in Spring Validator

When ValidationMessages.properties is not provided, Default messages provided by Hibernate Validator is used.

5.5.2.4.1. Messages to be defined in ValidationMessages.properties

Define messages for message key specified in message attribute of Bean Validation annotation of ValidationMessages.properties under class path (normal src/main/resources).

It is explained below using the following form used at the beginning of Basic single item check.

• Form class (re-displayed)

  public class UserForm implements Serializable {
  
      @NotNull
      @Size(min = 1, max = 20)
      private String name;
  
      @NotNull
      @Size(min = 1, max = 50)
      @Email
      private String email;
  
      @NotNull
      @Min(0)
      @Max(200)
      private Integer age;
  
      // omitted getter/setter
  }
  

• ValidationMessages.properties

  Change error messages of @NotNull, @Size, @Min, @Max, @Email.

  javax.validation.constraints.NotNull.message=is required.
  # (1)
  javax.validation.constraints.Size.message=size is not in the range {min} through {max}.
  # (2)
  javax.validation.constraints.Min.message=cannot be less than {value}.
  javax.validation.constraints.Max.message=cannot be greater than {value}.
  org.hibernate.validator.constraints.Email.message=is an invalid e-mail address.
  

  Sr. No.	Description
  (1)	It is possible to embed the value of attributes specified in the annotation using {Attribute name}.
  (2)	It is possible to embed the invalid value using {value}.

When the form is sent with input fields left blank after adding the above settings, changed error messages are displayed as shown below.

Warning

Since {FQCN of annotation.message} is set in message attribute in Bean Validation standard annotations and independent Hibernate Validator annotations, messages can be defined in properties file in the above format. However, since all annotations may not be in this format, Javadoc or source code of the target annotation should be checked.

FQCN of annotation.message = Message

Add {0} to message as shown below when field name is to be included in error message.

• ValidationMessages.properties

Change error message of @NotNull, @Size, @Min, @Max and @Email.

javax.validation.constraints.NotNull.message="{0}" is required.
javax.validation.constraints.Size.message=The size of "{0}" is not in the range {min} through {max}.
javax.validation.constraints.Min.message="{0}" cannot be less than {value}.
javax.validation.constraints.Max.message="{0}" cannot be greater than {value}.
org.hibernate.validator.constraints.Email.message="{0}" is an invalid e-mail address.

Error message is changed as follows.

In this way, property name of form class gets displayed on the screen and so it is not user friendly. To display an appropriate field name, it should be defined in application-messages.properties in the following format.

form property name=field name to be displayed

Adding the same to our example.

• application-messages.properties

  name=Name
  email=Email
  age=Age
  

Error messages are changed as follows.

Note

Inserting field name in place of {0} is the functionality of Spring and not of Bean Validation. Therefore, the settings for changing field name should be defined in application-messages.properties(ResourceBundleMessageSource) which is directly under Spring management.

Tip

In Bean Validation 1.1, it is possible to use Expression Language (hereafter referred to as “EL expression”) in a message specified in ValidationMessages.properties. Hibernate Validator 5.x supports Expression Language 2.2 or higher version.

Executable EL expression version differs depending on the version of application server. Therefore when EL expression is to be used, it should be used after confirming the version of EL expression supported by application server.

Following is an example of using EL expression in a message which is defined in ValidationMessages.properties provided by Hibernate Validator by default.

# ...
# (1)
javax.validation.constraints.DecimalMax.message  = must be less than ${inclusive == true ? 'or equal to ' : ''}{value}
# ...

Sr. No.

Description

(1)

An EL expression is a part of “${inclusive == true ? 'or equal to ' : ''} ” in a message. From the above mentioned definition of message, 2 patterns of messages are created as given below. must be less than or equal to {value} must be less than {value} (A value specified in value attribute of @DecimalMax annotation is embedded in {value} part) Former is created when true is specified (or when not specified) in inclusive attribute of @DecimalMax annotation, Latter is created when false is specified in inclusive attribute of @DecimalMax annotation. For handling of EL expressions in Bean Validation refer to: Hibernate Validator Reference Guide(Interpolation with message expressions).

5.5.2.4.2. Messages to be defined in application-messages.properties

Default messages to be used in system are defined in ValidationMessages.properties however, depending on the screen, they may have to be changed from the default value.

In this case, define messages in the following format in application-messages.properties.

[annotation name].[form attribute name].[property name] = [target message]

Considering that the message for age field already exists Messages to be defined in ValidationMessages.properties. Override the message for age field using the below settings.

• application-messages.properties

  # override messages
  NotNull.userForm.age="{0}" is compulsory.
  Max.userForm.age="{0}" must be less than or equal to {1}.
  Max.userForm.age="{0}" must be less than or equal to {1}.
  NotNull.userForm.email="{0}" is compulsory.
  Size.userForm.age=The size of "{0}" must be between {2} and {1}.
  # filed names
  name=Name
  email=Email
  age=Age
  

Value of attributes of the annotation gets inserted after {1} onwards.

Error messages are changed as follows.

Note

There are other formatsas well for the message key format of application-messages.properties; however, if it is used with the purpose of overwriting some default messages, it should be in [annotation name].[form attribute name].[property name] format.

5.5.3. How to extend

Other than standard check rules, bean validation has a mechanism to develop annotations for independent rules .

The method of creating independent rules can be widely classified into the following two broader criteria.

• Combination of existing rules
• Creation of new rules

Basically, the below template can be used to create annotation for each rule.

package com.example.common.validation;

import java.lang.annotation.Documented;
import java.lang.annotation.Retention;
import java.lang.annotation.Target;
import javax.validation.Constraint;
import javax.validation.Payload;
import static java.lang.annotation.ElementType.ANNOTATION_TYPE;
import static java.lang.annotation.ElementType.CONSTRUCTOR;
import static java.lang.annotation.ElementType.FIELD;
import static java.lang.annotation.ElementType.METHOD;
import static java.lang.annotation.ElementType.PARAMETER;
import static java.lang.annotation.RetentionPolicy.RUNTIME;

@Documented
@Constraint(validatedBy = {})
@Target({ METHOD, FIELD, ANNOTATION_TYPE, CONSTRUCTOR, PARAMETER })
@Retention(RUNTIME)
public @interface Xxx {
    String message() default "{com.example.common.validation.Xxx.message}";

    Class<?>[] groups() default {};

    Class<? extends Payload>[] payload() default {};

    @Target({ METHOD, FIELD, ANNOTATION_TYPE, CONSTRUCTOR, PARAMETER })
    @Retention(RUNTIME)
    @Documented
    public @interface List {
        Xxx[] value();
    }
}

5.5.3.1. Creation of Bean Validation annotation by combining existing rules

Consider the following restrictions at the system level and domain level respectively.

At the system level,

• String must be single byte alphanumeric characters
• Numbers must be positive

Or at the domain level,

• “User ID” must be between 4 and 20 single byte characters
• “Age” must be between 1 year and 150 years

These can be implemented by combining @Pattern, @Size, @Min, @Max of the existing rules.

However, if the same rules are to be used at multiple places, settings get distributed and maintainability worsens.

One rule can be created by combining multiple rules. There is an advantage to be able to have not only common regular expression pattern and maximum/minimum values but also error message when an independent annotation is created. By this, reusability and maintainability increases. Even if multiple rules are not combined, it also proves beneficial if used only to give specific value to an attribute.

Implementation example is shown below.

• Implementation example of @Alphanumeric annotation which is restricted to single byte alphanumeric characters

  package com.example.common.validation;
  
  import java.lang.annotation.Documented;
  import java.lang.annotation.Retention;
  import java.lang.annotation.Target;
  import javax.validation.Constraint;
  import javax.validation.Payload;
  import javax.validation.ReportAsSingleViolation;
  import javax.validation.constraints.Pattern;
  
  import static java.lang.annotation.ElementType.ANNOTATION_TYPE;
  import static java.lang.annotation.ElementType.CONSTRUCTOR;
  import static java.lang.annotation.ElementType.FIELD;
  import static java.lang.annotation.ElementType.METHOD;
  import static java.lang.annotation.ElementType.PARAMETER;
  import static java.lang.annotation.RetentionPolicy.RUNTIME;
  
  @Documented
  @Constraint(validatedBy = {})
  @Target({ METHOD, FIELD, ANNOTATION_TYPE, CONSTRUCTOR, PARAMETER })
  @Retention(RUNTIME)
  @ReportAsSingleViolation // (1)
  @Pattern(regexp = "[a-zA-Z0-9]*") // (2)
  public @interface AlphaNumeric {
      String message() default "{com.example.common.validation.AlphaNumeric.message}"; // (3)
  
      Class<?>[] groups() default {};
  
      Class<? extends Payload>[] payload() default {};
  
      @Target({ METHOD, FIELD, ANNOTATION_TYPE, CONSTRUCTOR, PARAMETER })
      @Retention(RUNTIME)
      @Documented
      public @interface List {
          AlphaNumeric[] value();
      }
  }
  

  Sr. No.	Description
  (1)	This will consolidate error messages and return only the message of this annotation at the time of error.
  (2)	Define rules used by this annotation.
  (3)	Define default value of error message.

• Implementation example of @NotNegative annotation which is restricted to positive number

  package com.example.common.validation;
  
  import java.lang.annotation.Documented;
  import java.lang.annotation.Retention;
  import java.lang.annotation.Target;
  import javax.validation.Constraint;
  import javax.validation.Payload;
  import javax.validation.ReportAsSingleViolation;
  import javax.validation.constraints.Min;
  
  import static java.lang.annotation.ElementType.ANNOTATION_TYPE;
  import static java.lang.annotation.ElementType.CONSTRUCTOR;
  import static java.lang.annotation.ElementType.FIELD;
  import static java.lang.annotation.ElementType.METHOD;
  import static java.lang.annotation.ElementType.PARAMETER;
  import static java.lang.annotation.RetentionPolicy.RUNTIME;
  
  @Documented
  @Constraint(validatedBy = {})
  @Target({ METHOD, FIELD, ANNOTATION_TYPE, CONSTRUCTOR, PARAMETER })
  @Retention(RUNTIME)
  @ReportAsSingleViolation
  @Min(value = 0)
  public @interface NotNegaitive {
      String message() default "{com.example.common.validation.NotNegaitive.message}";
  
      Class<?>[] groups() default {};
  
      Class<? extends Payload>[] payload() default {};
  
      @Target({ METHOD, FIELD, ANNOTATION_TYPE, CONSTRUCTOR, PARAMETER })
      @Retention(RUNTIME)
      @Documented
      public @interface List {
          NotNegaitive[] value();
      }
  }
  

• Implementation example of @UserId annotation which regulates the format of “User ID”.

  package com.example.sample.domain.validation;
  
  import java.lang.annotation.Documented;
  import java.lang.annotation.Retention;
  import java.lang.annotation.Target;
  import javax.validation.Constraint;
  import javax.validation.Payload;
  import javax.validation.ReportAsSingleViolation;
  import javax.validation.constraints.Pattern;
  import javax.validation.constraints.Size;
  
  import static java.lang.annotation.ElementType.ANNOTATION_TYPE;
  import static java.lang.annotation.ElementType.CONSTRUCTOR;
  import static java.lang.annotation.ElementType.FIELD;
  import static java.lang.annotation.ElementType.METHOD;
  import static java.lang.annotation.ElementType.PARAMETER;
  import static java.lang.annotation.RetentionPolicy.RUNTIME;
  
  @Documented
  @Constraint(validatedBy = {})
  @Target({ METHOD, FIELD, ANNOTATION_TYPE, CONSTRUCTOR, PARAMETER })
  @Retention(RUNTIME)
  @ReportAsSingleViolation
  @Size(min = 4, max = 20)
  @Pattern(regexp = "[a-z]*")
  public @interface UserId {
      String message() default "{com.example.sample.domain.validation.UserId.message}";
  
      Class<?>[] groups() default {};
  
      Class<? extends Payload>[] payload() default {};
  
      @Target({ METHOD, FIELD, ANNOTATION_TYPE, CONSTRUCTOR, PARAMETER })
      @Retention(RUNTIME)
      @Documented
      public @interface List {
          UserId[] value();
      }
  }
  

• Implementation example of @Age annotation which regulates the constraints on “Age”

  package com.example.sample.domain.validation;
  
  import java.lang.annotation.Documented;
  import java.lang.annotation.Retention;
  import java.lang.annotation.Target;
  import javax.validation.Constraint;
  import javax.validation.Payload;
  import javax.validation.ReportAsSingleViolation;
  import javax.validation.constraints.Max;
  import javax.validation.constraints.Min;
  
  import static java.lang.annotation.ElementType.ANNOTATION_TYPE;
  import static java.lang.annotation.ElementType.CONSTRUCTOR;
  import static java.lang.annotation.ElementType.FIELD;
  import static java.lang.annotation.ElementType.METHOD;
  import static java.lang.annotation.ElementType.PARAMETER;
  import static java.lang.annotation.RetentionPolicy.RUNTIME;
  
  @Documented
  @Constraint(validatedBy = {})
  @Target({ METHOD, FIELD, ANNOTATION_TYPE, CONSTRUCTOR, PARAMETER })
  @Retention(RUNTIME)
  @ReportAsSingleViolation
  @Min(1)
  @Max(150)
  public @interface Age {
      String message() default "{com.example.sample.domain.validation.Age.message}";
  
      Class<?>[] groups() default {};
  
      Class<? extends Payload>[] payload() default {};
  
      @Target({ METHOD, FIELD, ANNOTATION_TYPE, CONSTRUCTOR, PARAMETER })
      @Retention(RUNTIME)
      @Documented
      public @interface List {
          Age[] value();
      }
  }
  

  Note

  If multiple rules are set in a single annotation, their AND condition forms the composite annotation. In Hibernate Validator, @ConstraintComposition annotation is provided to implement OR condition. Refer to Hibernate Validator document for details.

5.5.3.2. Creation of Bean Validation annotation by implementing new rules

Any rule can be created by implementing javax.validation.ConstraintValidator interface and creating annotation that uses this Validator.

The method of usage is as follows.

• Rules that cannot be implemented by combining the existing rules
• check rule for correlated items
• Business logic check

5.5.3.2.1. Rules that cannot be implemented by combining the existing rules

For the rules that cannot be implemented by combining @Pattern, @Size, @Min, @Max, implement javax.validation.ConstraintValidator.

For example, rules that check ISBN (International Standard Book Number)-13 format are given.

• Annotation

  package com.example.common.validation;
  
  import java.lang.annotation.Documented;
  import java.lang.annotation.Retention;
  import java.lang.annotation.Target;
  import javax.validation.Constraint;
  import javax.validation.Payload;
  import static java.lang.annotation.ElementType.ANNOTATION_TYPE;
  import static java.lang.annotation.ElementType.CONSTRUCTOR;
  import static java.lang.annotation.ElementType.FIELD;
  import static java.lang.annotation.ElementType.METHOD;
  import static java.lang.annotation.ElementType.PARAMETER;
  import static java.lang.annotation.RetentionPolicy.RUNTIME;
  
  @Documented
  @Constraint(validatedBy = { ISBN13Validator.class }) // (1)
  @Target({ METHOD, FIELD, ANNOTATION_TYPE, CONSTRUCTOR, PARAMETER })
  @Retention(RUNTIME)
  public @interface ISBN13 {
      String message() default "{com.example.common.validation.ISBN13.message}";
  
      Class<?>[] groups() default {};
  
      Class<? extends Payload>[] payload() default {};
  
      @Target({ METHOD, FIELD, ANNOTATION_TYPE, CONSTRUCTOR, PARAMETER })
      @Retention(RUNTIME)
      @Documented
      public @interface List {
          ISBN13[] value();
      }
  }
  

  Sr. No.	Description
  (1)	Specify the ConstraintValidator implementation class which will get executed when this annotation is used. Multiple constraints can also be specified.

• Validator

  package com.example.common.validation;
  
  import javax.validation.ConstraintValidator;
  import javax.validation.ConstraintValidatorContext;
  
  public class ISBN13Validator implements ConstraintValidator<ISBN13, String> { // (1)
  
      @Override
      public void initialize(ISBN13 constraintAnnotation) { // (2)
      }
  
      @Override
      public boolean isValid(String value, ConstraintValidatorContext context) { // (3)
          if (value == null) {
              return true; // (4)
          }
          return isISBN13Valid(value); // (5)
      }
  
      // This logic is written in http://en.wikipedia.org/wiki/International_Standard_Book_Number
      static boolean isISBN13Valid(String isbn) {
          if (isbn.length() != 13) {
              return false;
          }
          int check = 0;
          try {
              for (int i = 0; i < 12; i += 2) {
                  check += Integer.parseInt(isbn.substring(i, i + 1));
              }
              for (int i = 1; i < 12; i += 2) {
                  check += Integer.parseInt(isbn.substring(i, i + 1)) * 3;
              }
              check += Integer.parseInt(isbn.substring(12));
          } catch (NumberFormatException e) {
              return false;
          }
          return check % 10 == 0;
      }
  }
  

  Sr. No.	Description
  (1)	Specify target annotation and field type in generics parameter.
  (2)	Implement initialization process in initialize method.
  (3)	Implement input validation in isValid method.
  (4)	Consider input value as correct in case of null.
  (5)	Check ISBN-13 format.

Tip

Example of Bean Validation of file upload is classified in this category. Further, in common library as well, @ExistInCodeList is implemented in this way.

5.5.3.2.2. Check rules for correlated items

Check of correlated items, which span over multiple fields, can be done using Bean Validation as explained in Correlation item check.

It is recommended to target generalized rules, in case of deciding to use Bean Validation for check of correlated items.

An example of implementing the rule, “Contents of a field should match with its confirmation field” is given below.

Set constraint of assigning “confirm” as the prefix of confirmation field.

• Annotation

  Define such that annotation for validation of correlated items can be used at class level as well.

  package com.example.common.validation;
  
  import java.lang.annotation.Documented;
  import java.lang.annotation.Retention;
  import java.lang.annotation.Target;
  import javax.validation.Constraint;
  import javax.validation.Payload;
  import static java.lang.annotation.ElementType.ANNOTATION_TYPE;
  import static java.lang.annotation.ElementType.TYPE;
  import static java.lang.annotation.RetentionPolicy.RUNTIME;
  
  @Documented
  @Constraint(validatedBy = { ConfirmValidator.class })
  @Target({ TYPE, ANNOTATION_TYPE }) // (1)
  @Retention(RUNTIME)
  public @interface Confirm {
      String message() default "{com.example.common.validation.Confirm.message}";
  
      Class<?>[] groups() default {};
  
      Class<? extends Payload>[] payload() default {};
  
      /**
       * Field name
       */
      String field(); // (2)
  
      @Target({ TYPE, ANNOTATION_TYPE })
      @Retention(RUNTIME)
      @Documented
      public @interface List {
          Confirm[] value();
      }
  }
  

  Sr. No.	Description
  (1)	Narrow down the target of using this annotation, such that it can be added only to class or annotation.
  (2)	Define parameter to pass to annotation.

• Validator

  package com.example.common.validation;
  
  import javax.validation.ConstraintValidator;
  import javax.validation.ConstraintValidatorContext;
  
  import org.springframework.beans.BeanWrapper;
  import org.springframework.beans.BeanWrapperImpl;
  import org.springframework.util.ObjectUtils;
  import org.springframework.util.StringUtils;
  
  public class ConfirmValidator implements ConstraintValidator<Confirm, Object> {
      private String field;
  
      private String confirmField;
  
      private String message;
  
      public void initialize(Confirm constraintAnnotation) {
          field = constraintAnnotation.field();
          confirmField = "confirm" + StringUtils.capitalize(field);
          message = constraintAnnotation.message();
      }
  
      public boolean isValid(Object value, ConstraintValidatorContext context) {
          BeanWrapper beanWrapper = new BeanWrapperImpl(value); // (1)
          Object fieldValue = beanWrapper.getPropertyValue(field); // (2)
          Object confirmFieldValue = beanWrapper.getPropertyValue(confirmField);
          boolean matched = ObjectUtils.nullSafeEquals(fieldValue,
                  confirmFieldValue);
          if (matched) {
              return true;
          } else {
              context.disableDefaultConstraintViolation(); // (3)
              context.buildConstraintViolationWithTemplate(message)
                      .addPropertyNode(field).addConstraintViolation(); // (4)
              return false;
          }
      }
  
  }
  

  Sr. No.	Description
  (1)	Use org.springframework.beans.BeanWrapper which is very convenient to access JavaBean properties.
  (2)	Acquire property value from the form object through BeanWrapper.
  (3)	Disable the creation of default ConstraintViolation object.
  (4)	Create an independent ConstraintViolation object. Define message to be output in ConstraintValidatorContext.buildConstraintViolationWithTemplate. Specify field name to output error message in ConstraintViolationBuilder.addPropertyNode. Refer to JavaDoc for details.

Tip

ConstraintViolationBuilder.addPropertyNode method has been added from the Bean Validation 1.1.

ConstraintViolationBuilder.addNode method had been used in Bean Validation 1.0; however, it is a deprecated API from Bean Validation 1.1.

For deprecated API of Bean Validation, refer to Bean Validation API Document (Deprecated API).

Check below for the changes, if the “Reset password” is re-implemented using @Confirm annotation.

• Form class

  package com.example.sample.app.validation;
  
  import java.io.Serializable;
  
  import javax.validation.constraints.NotNull;
  import javax.validation.constraints.Size;
  
  import com.example.common.validation.Confirm;
  
  @Confirm(field = "password") // (1)
  public class PasswordResetForm implements Serializable {
      private static final long serialVersionUID = 1L;
  
      @NotNull
      @Size(min = 8)
      private String password;
  
      private String confirmPassword;
  
      // omitted getter/setter
  }
  

  Sr. No.	Description
  (1)	Assign @Confirm annotation at class level. By this, form object is passed as an argument to ConstraintValidator.isValid.

• Controller class

  There is no need to inject Validator and add Validator using @InitBinder.

  package com.example.sample.app.validation;
  
  import org.springframework.stereotype.Controller;
  import org.springframework.validation.BindingResult;
  import org.springframework.validation.annotation.Validated;
  import org.springframework.web.bind.annotation.ModelAttribute;
  import org.springframework.web.bind.annotation.RequestMapping;
  import org.springframework.web.bind.annotation.RequestMethod;
  
  @Controller
  @RequestMapping("password")
  public class PasswordResetController {
  
      @ModelAttribute
      public PasswordResetForm setupForm() {
          return new PasswordResetForm();
      }
  
      @RequestMapping(value = "reset", method = RequestMethod.GET, params = "form")
      public String resetForm() {
          return "password/resetForm";
      }
  
      @RequestMapping(value = "reset", method = RequestMethod.POST)
      public String reset(@Validated PasswordResetForm form, BindingResult result) {
          if (result.hasErrors()) {
              return "password/resetForm";
          }
          return "redirect:/password/reset?complete";
      }
  
      @RequestMapping(value = "reset", method = RequestMethod.GET, params = "complete")
      public String resetComplete() {
          return "password/resetComplete";
      }
  }
  

5.5.3.2.3. Business logic check

Business logic check should implement Implementation in Service of domain layer and store result message in ResultMessages object.

Accordingly, it is expected that, they will be normally displayed at the top of the screen.

However, there are cases, where business logic error message (such as, “whether the entered user name is already registered”) of target input field is to be displayed next to the field. In such a case, service class is injected in Validator class and business logic check is executed in ConstraintValidator.isValid.

An example of implementing, “whether the entered user name is already registered” in Bean Validation is shown below.

• Service class

  Implementation class (UserServiceImpl) is omitted.

  package com.example.sample.domain.service.user;
  
  public interface UserService {
  
      boolean isUnusedUserId(String userId);
  
      // omitted other methods
  }
  

• Annotation

  package com.example.sample.domain.validation;
  
  import java.lang.annotation.Documented;
  import java.lang.annotation.Retention;
  import java.lang.annotation.Target;
  import javax.validation.Constraint;
  import javax.validation.Payload;
  import static java.lang.annotation.ElementType.ANNOTATION_TYPE;
  import static java.lang.annotation.ElementType.CONSTRUCTOR;
  import static java.lang.annotation.ElementType.FIELD;
  import static java.lang.annotation.ElementType.METHOD;
  import static java.lang.annotation.ElementType.PARAMETER;
  import static java.lang.annotation.RetentionPolicy.RUNTIME;
  
  @Documented
  @Constraint(validatedBy = { UnusedUserIdValidator.class })
  @Target({ METHOD, FIELD, ANNOTATION_TYPE, CONSTRUCTOR, PARAMETER })
  @Retention(RUNTIME)
  public @interface UnusedUserId {
      String message() default "{com.example.sample.domain.validation.UnusedUserId.message}";
  
      Class<?>[] groups() default {};
  
      Class<? extends Payload>[] payload() default {};
  
      @Target({ METHOD, FIELD, ANNOTATION_TYPE, CONSTRUCTOR, PARAMETER })
      @Retention(RUNTIME)
      @Documented
      public @interface List {
          UnusedUserId[] value();
      }
  }
  

• Validator class

  package com.example.sample.domain.validation;
  
  import javax.inject.Inject;
  import javax.validation.ConstraintValidator;
  import javax.validation.ConstraintValidatorContext;
  
  import org.springframework.stereotype.Component;
  
  import com.example.sample.domain.service.user.UserService;
  
  @Component // (1)
  public class UnusedUserIdValidator implements
                                    ConstraintValidator<UnusedUserId, String> {
  
      @Inject // (2)
      UserService userService;
  
      @Override
      public void initialize(UnusedUserId constraintAnnotation) {
      }
  
      @Override
      public boolean isValid(String value, ConstraintValidatorContext context) {
          if (value == null) {
              return true;
          }
  
          return userService.isUnusedUserId(value); // (3)
      }
  
  }
  

  Sr. No.	Description
  (1)	Settings to enable component scan of the Validator class. Target package must be included in <context:component-scan base-package="..." /> of Bean definition file.
  (2)	Inject the service class to be called.
  (3)	Return the result of business logic error check. Process should be delegated to service class. Logic must not be written directly in the isValid method.

5.5.4. Appendix

5.5.4.1. Input validation rules provided by Hibernate Validator

Hibernate Validator provides additional validation annotations, in addition to the annotations defined in Bean Validation.

Refer to Herefor the annotation list that can be used for validation.

5.5.4.1.1. Bean Validation check rules

Bean Validation standard annotations are shown below.

Refer to Chapter 7 Bean Validation specification for details.

Annotation(javax.validation.*)	Target type	Application	Usage example
@NotNull	Arbitrary	Validates that the target field is not null.	@NotNull private String id;
@Null	Arbitrary	Validates that the target field is null. (Example: usage in group validation)	@Nulll(groups={Update.class}) private String id;
@Pattern	String	Whether the target field matches with the regular expression (In case of Hibernate Validator implementation, it is also possible to use it with arbitrary CharSequence inherited class)	@Pattern(regexp = “[0-9]+”) private String tel;
@Min	BigDecimal, BigInteger, byte, short, int, long and wrapper (In case of Hibernate Validator implementation, it is also possible to use it with arbitrary CharSequence, Number inherited class. However, only in cases where string can be converted to a number.)	Validate whether the value is greater than the minimum value.	Refer @Max
@Max	BigDecimal, BigInteger, byte, short, int, long and wrapper (In case of Hibernate Validator implementation, it is also possible to use it with arbitrary CharSequence, Number inherited class. However, only in cases where string can be converted to a number.)	Validate whether the value is less than the maximum value.	@Min(1) @Max(100) private int quantity;
@DecimalMin	BigDecimal, BigInteger, String, byte, short, int, long and wrapper (In case of Hibernate Validator implementation, it is also possible to use it with arbitrary CharSequence, Number inherited class.)	|Validate whether the Decimal value is greater than or equal to the minimum value. | By specifying inclusive = false, it is possible to change to an operation so as to validate whether the value is greater than the minimum value.	Refer @DecimalMax
@DecimalMax	BigDecimal, BigInteger, String, byte, short, int, long and wrapper (In case of Hibernate Validator implementation, it is also possible to use it with arbitrary CharSequence, Number inherited class.)	Validate whether the decimal value is less than or equal to the maximum value. By specifying inclusive = false, it is possible to change to an operation so as to validate whether the value is less than the maximum value.	@DecimalMin(“0.0”) @DecimalMax(“99999.99”) private BigDecimal price;
@Size	String(length), Collection(size), Map(size), Array(length) (In case of Hibernate Validator implementation, it is also possible to use it with arbitrary CharSequence inherited class.)	Validate whether the size is between min and max length. It is possible to omit min and max. In that case, min=0 and max=Integer.MAX_VALUE by default.	@Size(min=4, max=64) private String password;
@Digits	BigDecimal, BigInteger, String, byte, short, int, long and wrapper	Check whether the value is a numerical value within the specified range. Specify the maximum number of integer digits permitted in the ‘integer’ and the maximum value of decimal digits permitted in ‘fraction’.	@Digits(integer=6, fraction=2) private BigDecimal price;
@AssertTrue	boolean,Boolean	Validate that the target field is ‘true’(Example: Whether it agrees to the terms）	@AssertTrue private boolean checked;
@AssertFalse	boolean,Boolean	Validate whether the target field is ‘false’	@AssertFalse private boolean checked;
@Future	Date, Calendar (In case of Hibernate Validator implementation, it is also applicable to Joda-Time class)	Validate whether it is a future date.	@Future private Date eventDate;
@Past	Date, Calendar (In case of Hibernate Validator implementation, it is also applicable to Joda-Time class)	Validate whether it is a past date.	@Past private Date eventDate;
@Valid	Optional non-primitive type	Validate recursively for related objects.	@Valid private List<Employer> employers; @Valid private Dept dept;

Tip

inclusive attribute of @DecimalMin and @DecimalMax annotation is, an attribute added from Bean Validation 1.1.

By specifying true (to allow same value of specified threshold) to the default value of inclusive attribute, compatibility with Bean Validation 1.0 is maintained.

5.5.4.1.2. Hibernate Validator check rules

All the major annotations of Hibernate Validator are shown below.

Refer to Hibernate Validator specifications for details.

Annotation(org.hibernate.validator.constraints.*)	Target type	Application	Usage example
@CreditCardNumber	It is applicable to any CharSequence inherited class	Validate whether the credit card number is valid as per Luhn algorithm. It does not necessarily check whether the credit card number is available. By specifying ignoreNonDigitCharacters = true, it is possible to validate by ignoring non-numeric characters.	@CreditCardNumber private String cardNumber;
@Email	It is applicable to any CharSequence inherited class	Validate whether the Email address is complaint with RFC2822.	@Email private String email;
@URL	It is applicable to any CharSequence inherited class	Validate whether it is compliant with RFC2396.	@URL private String url;
@NotBlank	It is applicable to any CharSequence inherited class	Validate that it is not Null, empty string (“”) and space only.	@NotBlank private String userId;
@NotEmpty	It is applicable to Collection, Map, arrays, and any CharSequence inherited class	Validate that it is not Null or empty. @NotEmpty should be used when check is to be done in @NotNull + @Min(1) combination.	@NotEmpty private String password;

Warning

When following annotations provided by Hibernate Validator are used, if a default message is used, a bug that the message is not generated correctly HV-881, HV-949) occurs.

• @CreditCardNumber(message is displayed, but WARN log is output)
• @LuhnCheck
• @Mod10Check
• @Mod11Check
• @ModCheck(deprecated API from 5.1.0.Final)

This bug occurs because of the flaws in message definitions provided by default, and it is possible to avoid them by overwriting the default messages by an appropriate message.

In case of overwriting the default messages, it is advisable to define an appropriate message by creating ValidationMessages.properties directly under the class path (normal src/main/resources).

For appropriate message definition, refer to: Modifications for Hibernate Validator 5.2 version (next minor version upgrade).

5.5.4.2. Default messages provided by Hibernate Validator

In hibernate-validator-<version>.jar, there is a ValidationMessages.properties file at org/hibernate/validator location, which contains the default messages of all Hibernate provided annotations.

javax.validation.constraints.AssertFalse.message = must be false
javax.validation.constraints.AssertTrue.message  = must be true
javax.validation.constraints.DecimalMax.message  = must be less than ${inclusive == true ? 'or equal to ' : ''}{value}
javax.validation.constraints.DecimalMin.message  = must be greater than ${inclusive == true ? 'or equal to ' : ''}{value}
javax.validation.constraints.Digits.message      = numeric value out of bounds (<{integer} digits>.<{fraction} digits> expected)
javax.validation.constraints.Future.message      = must be in the future
javax.validation.constraints.Max.message         = must be less than or equal to {value}
javax.validation.constraints.Min.message         = must be greater than or equal to {value}
javax.validation.constraints.NotNull.message     = may not be null
javax.validation.constraints.Null.message        = must be null
javax.validation.constraints.Past.message        = must be in the past
javax.validation.constraints.Pattern.message     = must match "{regexp}"
javax.validation.constraints.Size.message        = size must be between {min} and {max}

org.hibernate.validator.constraints.CreditCardNumber.message        = invalid credit card number
org.hibernate.validator.constraints.EAN.message                     = invalid {type} barcode
org.hibernate.validator.constraints.Email.message                   = not a well-formed email address
org.hibernate.validator.constraints.Length.message                  = length must be between {min} and {max}
org.hibernate.validator.constraints.LuhnCheck.message               = The check digit for ${validatedValue} is invalid, Luhn Modulo 10 checksum failed
org.hibernate.validator.constraints.Mod10Check.message              = The check digit for ${validatedValue} is invalid, Modulo 10 checksum failed
org.hibernate.validator.constraints.Mod11Check.message              = The check digit for ${validatedValue} is invalid, Modulo 11 checksum failed
org.hibernate.validator.constraints.ModCheck.message                = The check digit for ${validatedValue} is invalid, ${modType} checksum failed
org.hibernate.validator.constraints.NotBlank.message                = may not be empty
org.hibernate.validator.constraints.NotEmpty.message                = may not be empty
org.hibernate.validator.constraints.ParametersScriptAssert.message  = script expression "{script}" didn't evaluate to true
org.hibernate.validator.constraints.Range.message                   = must be between {min} and {max}
org.hibernate.validator.constraints.SafeHtml.message                = may have unsafe html content
org.hibernate.validator.constraints.ScriptAssert.message            = script expression "{script}" didn't evaluate to true
org.hibernate.validator.constraints.URL.message                     = must be a valid URL

org.hibernate.validator.constraints.br.CNPJ.message                 = invalid Brazilian corporate taxpayer registry number (CNPJ)
org.hibernate.validator.constraints.br.CPF.message                  = invalid Brazilian individual taxpayer registry number (CPF)
org.hibernate.validator.constraints.br.TituloEleitoral.message      = invalid Brazilian Voter ID card number

5.5.4.3. Type mismatch

Pertaining the non-String fields of the form object, if values which cannot be converted to the corresponding data-type have been submitted, org.springframework.beans.TypeMismatchException is thrown.

In the “New user registration” example, The data-type of “Age” is Integer. However, if the value entered in this field cannot be converted to an integer, error message is displayed as follows.

Cause of exception is displayed as it is and is not appropriate as an error message. It is possible to define the error message for type mismatch in the properties file (application-messages.properties) which is read by org.springframework.context.MessageSource.

Error messages can be defined with the following rules.

Message key	Message contents	Application
typeMismatch	Default message for all type mismatch errors	Default value for entire system
typeMismatch.[target FQCN]	Default message for specific type mismatch error	Default value for entire system
typeMismatch.[form attribute name].[property name]	Type mismatch error message for specific form field	Customized message for each screen

When the following messages are added to application-messages.properties,

# typemismatch
typeMismatch="{0}" is invalid.
typeMismatch.int="{0}" must be an integer.
typeMismatch.double="{0}" must be a double.
typeMismatch.float="{0}" must be a float.
typeMismatch.long="{0}" must be a long.
typeMismatch.short="{0}" must be a short.
typeMismatch.java.lang.Integer="{0}" must be an integer.
typeMismatch.java.lang.Double="{0}" must be a double.
typeMismatch.java.lang.Float="{0}" must be a float.
typeMismatch.java.lang.Long="{0}" must be a long.
typeMismatch.java.lang.Short="{0}" must be a short.
typeMismatch.java.util.Date="{0}" is not a date.

# field names
name=Name
email=Email
age=Age

Error message gets changed as shown below.

Field name can be inserted in the message by specifying {0} in the message; This is as per the description in Messages to be defined in application-messages.properties.

Default messages should be defined.

Tip

Refer to Javadoc for the details of message key rules.

5.5.4.4. Binding null to blank string field

When the form is sent with input fields left blank in Spring MVC, empty string instead of null binds to form object by default.

In this case, the conditions like “blank is allowed but if specified, it must have at least 6 characters” is not satisfied by the use of existing annotations.

To bind null instead of empty string to the properties without any input,

org.springframework.beans.propertyeditors.StringTrimmerEditor can be used as follows.

@Controller
@RequestMapping("xxx")
public class XxxController {

    @InitBinder
    public void initBinder(WebDataBinder binder) {
        // bind empty strings as null
        binder.registerCustomEditor(String.class, new StringTrimmerEditor(true));
    }

    // omitted ...
}

With the help of this configuration, it can be specified in the controller whether empty strings which are to be considered as null or not.

@ControllerAdvice can be set as a configuration common to the entire project when you want to set reply empty string to null in the entire project.

Tip

About attribute of @ControllerAdvice annotation added from Spring Framework 4.0

By specifying attribute of @ControllerAdvice annotation, it has been improved to allow flexibility in specifying Controller to apply a method implemented in a class wherein @ControllerAdvice is assigned. For details about attribute refer to Attribute of @ControllerAdvice.

@ControllerAdvice
public class XxxControllerAdvice {

    @InitBinder
    public void initBinder(WebDataBinder binder) {
        // bind empty strings as null
        binder.registerCustomEditor(String.class, new StringTrimmerEditor(true));
    }

    // omitted ...
}

When this setting is made, all empty String values set to String fields of form object become null.

Therefore it must be noted that, it becomes necessary to specify @NotNull in case of mandatory check.